These boards have not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this includes the last ARCH_MPC8572 platform, remove that as well.
Cc: Peter Tyser ptyser@xes-inc.com Signed-off-by: Tom Rini trini@konsulko.com --- arch/powerpc/cpu/mpc85xx/Kconfig | 40 +- arch/powerpc/cpu/mpc85xx/Makefile | 1 - arch/powerpc/cpu/mpc85xx/mpc8572_serdes.c | 74 --- arch/powerpc/cpu/mpc86xx/Kconfig | 5 - arch/powerpc/include/asm/fsl_law.h | 4 +- arch/powerpc/include/asm/immap_85xx.h | 2 +- board/xes/common/Makefile | 1 - board/xes/xpedite517x/Kconfig | 12 - board/xes/xpedite517x/MAINTAINERS | 6 - board/xes/xpedite517x/Makefile | 8 - board/xes/xpedite517x/ddr.c | 124 ----- board/xes/xpedite517x/law.c | 27 - board/xes/xpedite517x/xpedite517x.c | 86 --- board/xes/xpedite520x/Kconfig | 12 - board/xes/xpedite520x/MAINTAINERS | 6 - board/xes/xpedite520x/Makefile | 11 - board/xes/xpedite520x/ddr.c | 68 --- board/xes/xpedite520x/law.c | 26 - board/xes/xpedite520x/tlb.c | 68 --- board/xes/xpedite520x/xpedite520x.c | 82 --- board/xes/xpedite537x/Kconfig | 12 - board/xes/xpedite537x/MAINTAINERS | 6 - board/xes/xpedite537x/Makefile | 11 - board/xes/xpedite537x/ddr.c | 234 -------- board/xes/xpedite537x/law.c | 25 - board/xes/xpedite537x/tlb.c | 82 --- board/xes/xpedite537x/xpedite537x.c | 82 --- board/xes/xpedite550x/Kconfig | 12 - board/xes/xpedite550x/MAINTAINERS | 6 - board/xes/xpedite550x/Makefile | 8 - board/xes/xpedite550x/ddr.c | 135 ----- board/xes/xpedite550x/law.c | 25 - board/xes/xpedite550x/tlb.c | 81 --- board/xes/xpedite550x/xpedite550x.c | 82 --- configs/xpedite517x_defconfig | 54 -- configs/xpedite520x_defconfig | 54 -- configs/xpedite537x_defconfig | 57 -- configs/xpedite550x_defconfig | 57 -- drivers/ddr/fsl/Kconfig | 1 - env/Kconfig | 2 +- include/configs/xpedite517x.h | 646 ---------------------- include/configs/xpedite520x.h | 445 --------------- include/configs/xpedite537x.h | 496 ----------------- include/configs/xpedite550x.h | 494 ----------------- 44 files changed, 5 insertions(+), 3765 deletions(-) delete mode 100644 arch/powerpc/cpu/mpc85xx/mpc8572_serdes.c delete mode 100644 board/xes/xpedite517x/Kconfig delete mode 100644 board/xes/xpedite517x/MAINTAINERS delete mode 100644 board/xes/xpedite517x/Makefile delete mode 100644 board/xes/xpedite517x/ddr.c delete mode 100644 board/xes/xpedite517x/law.c delete mode 100644 board/xes/xpedite517x/xpedite517x.c delete mode 100644 board/xes/xpedite520x/Kconfig delete mode 100644 board/xes/xpedite520x/MAINTAINERS delete mode 100644 board/xes/xpedite520x/Makefile delete mode 100644 board/xes/xpedite520x/ddr.c delete mode 100644 board/xes/xpedite520x/law.c delete mode 100644 board/xes/xpedite520x/tlb.c delete mode 100644 board/xes/xpedite520x/xpedite520x.c delete mode 100644 board/xes/xpedite537x/Kconfig delete mode 100644 board/xes/xpedite537x/MAINTAINERS delete mode 100644 board/xes/xpedite537x/Makefile delete mode 100644 board/xes/xpedite537x/ddr.c delete mode 100644 board/xes/xpedite537x/law.c delete mode 100644 board/xes/xpedite537x/tlb.c delete mode 100644 board/xes/xpedite537x/xpedite537x.c delete mode 100644 board/xes/xpedite550x/Kconfig delete mode 100644 board/xes/xpedite550x/MAINTAINERS delete mode 100644 board/xes/xpedite550x/Makefile delete mode 100644 board/xes/xpedite550x/ddr.c delete mode 100644 board/xes/xpedite550x/law.c delete mode 100644 board/xes/xpedite550x/tlb.c delete mode 100644 board/xes/xpedite550x/xpedite550x.c delete mode 100644 configs/xpedite517x_defconfig delete mode 100644 configs/xpedite520x_defconfig delete mode 100644 configs/xpedite537x_defconfig delete mode 100644 configs/xpedite550x_defconfig delete mode 100644 include/configs/xpedite517x.h delete mode 100644 include/configs/xpedite520x.h delete mode 100644 include/configs/xpedite537x.h delete mode 100644 include/configs/xpedite550x.h
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index cd7aa953567b..876f768e8601 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -185,20 +185,6 @@ config TARGET_KMCENT2 bool "Support kmcent2" select VENDOR_KM
-config TARGET_XPEDITE520X - bool "Support xpedite520x" - select ARCH_MPC8548 - -config TARGET_XPEDITE537X - bool "Support xpedite537x" - select ARCH_MPC8572 -# Use DDR3 controller with DDR2 DIMMs on this board - select SYS_FSL_DDRC_GEN3 - -config TARGET_XPEDITE550X - bool "Support xpedite550x" - select ARCH_P2020 - config TARGET_UCP1020 bool "Support uCP1020" select ARCH_P1020 @@ -374,23 +360,6 @@ config ARCH_MPC8560 select FSL_LAW select SYS_FSL_HAS_DDR1
-config ARCH_MPC8572 - bool - select FSL_LAW - select SYS_FSL_ERRATUM_A004508 - select SYS_FSL_ERRATUM_A005125 - select SYS_FSL_ERRATUM_DDR_115 - select SYS_FSL_ERRATUM_DDR111_DDR134 - select FSL_PCIE_RESET - select SYS_FSL_HAS_DDR2 - select SYS_FSL_HAS_DDR3 - select SYS_FSL_HAS_SEC - select SYS_FSL_SEC_BE - select SYS_FSL_SEC_COMPAT_2 - select SYS_PPC_E500_USE_DEBUG_TLB - select FSL_ELBC - imply CMD_NAND - config ARCH_P1010 bool select FSL_LAW @@ -865,7 +834,6 @@ config MAX_CPUS ARCH_T2080 default 2 if ARCH_B4420 || \ ARCH_BSC9132 || \ - ARCH_MPC8572 || \ ARCH_P1020 || \ ARCH_P1021 || \ ARCH_P1023 || \ @@ -891,7 +859,6 @@ config SYS_CCSRBAR_DEFAULT ARCH_MPC8544 || \ ARCH_MPC8548 || \ ARCH_MPC8560 || \ - ARCH_MPC8572 || \ ARCH_P1010 || \ ARCH_P1011 || \ ARCH_P1020 || \ @@ -1104,7 +1071,6 @@ config SYS_FSL_NUM_LAWS ARCH_BSC9132 || \ ARCH_C29X || \ ARCH_MPC8536 || \ - ARCH_MPC8572 || \ ARCH_P1010 || \ ARCH_P1011 || \ ARCH_P1020 || \ @@ -1151,8 +1117,7 @@ config SYS_PPC_E500_DEBUG_TLB depends on SYS_PPC_E500_USE_DEBUG_TLB default 0 if ARCH_MPC8544 || ARCH_MPC8548 default 1 if ARCH_MPC8536 - default 2 if ARCH_MPC8572 || \ - ARCH_P1011 || \ + default 2 if ARCH_P1011 || \ ARCH_P1020 || \ ARCH_P1021 || \ ARCH_P1024 || \ @@ -1216,9 +1181,6 @@ source "board/freescale/t208xrdb/Kconfig" source "board/freescale/t4rdb/Kconfig" source "board/keymile/Kconfig" source "board/socrates/Kconfig" -source "board/xes/xpedite520x/Kconfig" -source "board/xes/xpedite537x/Kconfig" -source "board/xes/xpedite550x/Kconfig" source "board/Arcturus/ucp1020/Kconfig"
endmenu diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 8cd4b44ec5f9..bbaae0d8454f 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -61,7 +61,6 @@ obj-$(CONFIG_ARCH_C29X) += c29x_serdes.o obj-$(CONFIG_ARCH_MPC8536) += mpc8536_serdes.o obj-$(CONFIG_ARCH_MPC8544) += mpc8544_serdes.o obj-$(CONFIG_ARCH_MPC8548) += mpc8548_serdes.o -obj-$(CONFIG_ARCH_MPC8572) += mpc8572_serdes.o obj-$(CONFIG_ARCH_P1010) += p1010_serdes.o obj-$(CONFIG_ARCH_P1011) += p1021_serdes.o obj-$(CONFIG_ARCH_P1020) += p1021_serdes.o diff --git a/arch/powerpc/cpu/mpc85xx/mpc8572_serdes.c b/arch/powerpc/cpu/mpc85xx/mpc8572_serdes.c deleted file mode 100644 index 1b4e6149184d..000000000000 --- a/arch/powerpc/cpu/mpc85xx/mpc8572_serdes.c +++ /dev/null @@ -1,74 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2010 Freescale Semiconductor, Inc. - */ - -#include <config.h> -#include <common.h> -#include <log.h> -#include <asm/io.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_serdes.h> - -#define SRDS1_MAX_LANES 8 - -static u32 serdes1_prtcl_map; - -static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { - [0x2] = {PCIE1, PCIE1, PCIE1, PCIE1, NONE, NONE, NONE, NONE}, - [0x3] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}, - [0x6] = {NONE, NONE, NONE, NONE, SRIO1, SRIO1, SRIO1, SRIO1}, - [0x7] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE3, PCIE3}, - [0xb] = {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1}, - [0xc] = {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1}, - [0xd] = {NONE, NONE, NONE, NONE, SRIO1, SRIO1, SRIO1, SRIO1}, - [0xe] = {NONE, NONE, NONE, NONE, SRIO1, SRIO1, SRIO1, SRIO1}, - [0xf] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1}, -}; - -int is_serdes_configured(enum srds_prtcl prtcl) -{ - if (!(serdes1_prtcl_map & (1 << NONE))) - fsl_serdes_init(); - - return (1 << prtcl) & serdes1_prtcl_map; -} - -void fsl_serdes_init(void) -{ - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - u32 pordevsr = in_be32(&gur->pordevsr); - u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> - MPC85xx_PORDEVSR_IO_SEL_SHIFT; - int lane; - - if (serdes1_prtcl_map & (1 << NONE)) - return; - - debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); - - if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) { - printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); - return; - } - - for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { - enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane]; - serdes1_prtcl_map |= (1 << lane_prtcl); - } - - if (!(pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) - serdes1_prtcl_map |= (1 << SGMII_TSEC1); - - if (!(pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) - serdes1_prtcl_map |= (1 << SGMII_TSEC2); - - if (!(pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) - serdes1_prtcl_map |= (1 << SGMII_TSEC3); - - if (!(pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS)) - serdes1_prtcl_map |= (1 << SGMII_TSEC4); - - /* Set the first bit to indicate serdes has been initialized */ - serdes1_prtcl_map |= (1 << NONE); -} diff --git a/arch/powerpc/cpu/mpc86xx/Kconfig b/arch/powerpc/cpu/mpc86xx/Kconfig index 7de42b5f2576..1ee87038bed4 100644 --- a/arch/powerpc/cpu/mpc86xx/Kconfig +++ b/arch/powerpc/cpu/mpc86xx/Kconfig @@ -13,10 +13,6 @@ config TARGET_SBC8641D select ARCH_MPC8641 select BOARD_EARLY_INIT_F
-config TARGET_XPEDITE517X - bool "Support xpedite517x" - select ARCH_MPC8641 - endchoice
config ARCH_MPC8610 @@ -52,6 +48,5 @@ config SYS_FSL_NUM_LAWS If not sure, do not change.
source "board/sbc8641d/Kconfig" -source "board/xes/xpedite517x/Kconfig"
endmenu diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h index 888640df6f81..77cdc80fdcd0 100644 --- a/arch/powerpc/include/asm/fsl_law.h +++ b/arch/powerpc/include/asm/fsl_law.h @@ -84,7 +84,7 @@ enum law_trgt_if { #if defined(CONFIG_ARCH_BSC9131) || defined(CONFIG_ARCH_BSC9132) LAW_TRGT_IF_OCN_DSP = 0x03, #else -#if !defined(CONFIG_ARCH_MPC8572) && !defined(CONFIG_ARCH_P2020) +#if !defined(CONFIG_ARCH_P2020) LAW_TRGT_IF_PCIE_3 = 0x03, #endif #endif @@ -120,7 +120,7 @@ enum law_trgt_if { #define LAW_TRGT_IF_PCIE_1 LAW_TRGT_IF_PCI #endif
-#if defined(CONFIG_ARCH_MPC8572) || defined(CONFIG_ARCH_P2020) +#if defined(CONFIG_ARCH_P2020) #define LAW_TRGT_IF_PCIE_3 LAW_TRGT_IF_PCI #endif #endif /* CONFIG_FSL_CORENET */ diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 900b8f43c82e..70112c91fc51 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -2853,7 +2853,7 @@ struct ccsr_pman { #define CONFIG_SYS_MPC85xx_PCIX2_OFFSET 0x9000 #define CONFIG_SYS_MPC85xx_PCIE1_OFFSET 0xa000 #define CONFIG_SYS_MPC85xx_PCIE2_OFFSET 0x9000 -#if defined(CONFIG_ARCH_MPC8572) || defined(CONFIG_ARCH_P2020) +#if defined(CONFIG_ARCH_P2020) #define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0x8000 #else #define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0xb000 diff --git a/board/xes/common/Makefile b/board/xes/common/Makefile index b5c6900021c4..49320305470e 100644 --- a/board/xes/common/Makefile +++ b/board/xes/common/Makefile @@ -4,7 +4,6 @@ # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
obj-$(CONFIG_FSL_PCI_INIT) += fsl_8xxx_pci.o -obj-$(CONFIG_ARCH_MPC8572) += fsl_8xxx_clk.o obj-$(CONFIG_MPC86xx) += fsl_8xxx_clk.o obj-$(CONFIG_ARCH_P2020) += fsl_8xxx_clk.o obj-$(CONFIG_MPC85xx) += fsl_8xxx_misc.o board.o diff --git a/board/xes/xpedite517x/Kconfig b/board/xes/xpedite517x/Kconfig deleted file mode 100644 index 91bbd22451b1..000000000000 --- a/board/xes/xpedite517x/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_XPEDITE517X - -config SYS_BOARD - default "xpedite517x" - -config SYS_VENDOR - default "xes" - -config SYS_CONFIG_NAME - default "xpedite517x" - -endif diff --git a/board/xes/xpedite517x/MAINTAINERS b/board/xes/xpedite517x/MAINTAINERS deleted file mode 100644 index 26e0acccb056..000000000000 --- a/board/xes/xpedite517x/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -XPEDITE517X BOARD -M: Peter Tyser ptyser@xes-inc.com -S: Maintained -F: board/xes/xpedite517x/ -F: include/configs/xpedite517x.h -F: configs/xpedite517x_defconfig diff --git a/board/xes/xpedite517x/Makefile b/board/xes/xpedite517x/Makefile deleted file mode 100644 index 10ac76a37a19..000000000000 --- a/board/xes/xpedite517x/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. - -obj-y += xpedite517x.o -obj-y += ddr.o -obj-y += law.o diff --git a/board/xes/xpedite517x/ddr.c b/board/xes/xpedite517x/ddr.c deleted file mode 100644 index a3fd2fc8ca89..000000000000 --- a/board/xes/xpedite517x/ddr.c +++ /dev/null @@ -1,124 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2009 Extreme Engineering Solutions, Inc. - * Copyright 2007-2008 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <i2c.h> -#include <fsl_ddr_sdram.h> -#include <fsl_ddr_dimm_params.h> -#include <log.h> - -void get_spd(ddr2_spd_eeprom_t *spd, u8 i2c_address) -{ - i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd, - sizeof(ddr2_spd_eeprom_t)); -} - -/* - * There are four board-specific SDRAM timing parameters which must be - * calculated based on the particular PCB artwork. These are: - * 1.) CPO (Read Capture Delay) - * - TIMING_CFG_2 register - * Source: Calculation based on board trace lengths and - * chip-specific internal delays. - * 2.) WR_DATA_DELAY (Write Command to Data Strobe Delay) - * - TIMING_CFG_2 register - * Source: Calculation based on board trace lengths. - * Unless clock and DQ lanes are very different - * lengths (>2"), this should be set to the nominal value - * of 1/2 clock delay. - * 3.) CLK_ADJUST (Clock and Addr/Cmd alignment control) - * - DDR_SDRAM_CLK_CNTL register - * Source: Signal Integrity Simulations - * 4.) 2T Timing on Addr/Ctl - * - TIMING_CFG_2 register - * Source: Signal Integrity Simulations - * Usually only needed with heavy load/very high speed (>DDR2-800) - * - * PCB routing on the XPedite5170 is nearly identical to the XPedite5370 - * so we use the XPedite5370 settings as a basis for the XPedite5170. - */ - -typedef struct board_memctl_options { - uint16_t datarate_mhz_low; - uint16_t datarate_mhz_high; - uint8_t clk_adjust; - uint8_t cpo_override; - uint8_t write_data_delay; -} board_memctl_options_t; - -static struct board_memctl_options bopts_ctrl[][2] = { - { - /* Controller 0 */ - { - /* DDR2 600/667 */ - .datarate_mhz_low = 500, - .datarate_mhz_high = 750, - .clk_adjust = 5, - .cpo_override = 8, - .write_data_delay = 2, - }, - { - /* DDR2 800 */ - .datarate_mhz_low = 750, - .datarate_mhz_high = 850, - .clk_adjust = 5, - .cpo_override = 9, - .write_data_delay = 2, - }, - }, - { - /* Controller 1 */ - { - /* DDR2 600/667 */ - .datarate_mhz_low = 500, - .datarate_mhz_high = 750, - .clk_adjust = 5, - .cpo_override = 7, - .write_data_delay = 2, - }, - { - /* DDR2 800 */ - .datarate_mhz_low = 750, - .datarate_mhz_high = 850, - .clk_adjust = 5, - .cpo_override = 8, - .write_data_delay = 2, - }, - }, -}; - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - struct board_memctl_options *bopts = bopts_ctrl[ctrl_num]; - sys_info_t sysinfo; - int i; - unsigned int datarate; - - get_sys_info(&sysinfo); - datarate = get_ddr_freq(0) / 1000000; - - for (i = 0; i < ARRAY_SIZE(bopts_ctrl[ctrl_num]); i++) { - if ((bopts[i].datarate_mhz_low <= datarate) && - (bopts[i].datarate_mhz_high >= datarate)) { - debug("controller %d:\n", ctrl_num); - debug(" clk_adjust = %d\n", bopts[i].clk_adjust); - debug(" cpo = %d\n", bopts[i].cpo_override); - debug(" write_data_delay = %d\n", - bopts[i].write_data_delay); - popts->clk_adjust = bopts[i].clk_adjust; - popts->cpo_override = bopts[i].cpo_override; - popts->write_data_delay = bopts[i].write_data_delay; - } - } - - /* - * Factors to consider for half-strength driver enable: - * - number of DIMMs installed - */ - popts->half_strength_driver_enable = 0; -} diff --git a/board/xes/xpedite517x/law.c b/board/xes/xpedite517x/law.c deleted file mode 100644 index b82f9f0d3b11..000000000000 --- a/board/xes/xpedite517x/law.c +++ /dev/null @@ -1,27 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - */ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -/* - * Notes: - * CCSRBAR don't need a configured Local Access Window. - * If flash is 8M at default position (last 8M), no LAW needed. - */ - -struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_FLASH_BASE2, LAW_SIZE_256M, LAW_TRGT_IF_LBC), -#ifdef CONFIG_SYS_NAND_BASE - /* NAND LAW covers 2 NAND flashes */ - SET_LAW(CONFIG_SYS_NAND_BASE, LAW_SIZE_512K, LAW_TRGT_IF_LBC), -#endif -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/xes/xpedite517x/xpedite517x.c b/board/xes/xpedite517x/xpedite517x.c deleted file mode 100644 index 8a5b52c49527..000000000000 --- a/board/xes/xpedite517x/xpedite517x.c +++ /dev/null @@ -1,86 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2009 Extreme Engineering Solutions, Inc. - */ - -#include <common.h> -#include <init.h> -#include <asm/global_data.h> -#include <asm/processor.h> -#include <fsl_ddr_sdram.h> -#include <asm/mmu.h> -#include <asm/io.h> -#include <fdt_support.h> -#include <pca953x.h> -#include "../common/fsl_8xxx_misc.h" - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_PCI) -extern void ft_board_pci_setup(void *blob, struct bd_info *bd); -#endif - -/* - * Print out which flash was booted from and if booting from the 2nd flash, - * swap flash chip selects to maintain consistent flash numbering/addresses. - */ -static void flash_cs_fixup(void) -{ - int flash_sel; - - /* - * Print boot dev and swap flash flash chip selects if booted from 2nd - * flash. Swapping chip selects presents user with a common memory - * map regardless of which flash was booted from. - */ - flash_sel = !((pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) & - CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS)); - printf("Flash: Executed from flash%d\n", flash_sel ? 2 : 1); - - if (flash_sel) { - set_lbc_br(0, CONFIG_SYS_BR1_PRELIM); - set_lbc_or(0, CONFIG_SYS_OR1_PRELIM); - - set_lbc_br(1, CONFIG_SYS_BR0_PRELIM); - set_lbc_or(1, CONFIG_SYS_OR0_PRELIM); - } -} - -int board_early_init_r(void) -{ - /* Initialize PCA9557 devices */ - pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR0, 0xff, 0); - pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR1, 0xff, 0); - pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR2, 0xff, 0); - pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR3, 0xff, 0); - - flash_cs_fixup(); - - return 0; -} - -int dram_init(void) -{ - phys_size_t dram_size = fsl_ddr_sdram(); - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* Initialize and enable DDR ECC */ - ddr_enable_ecc(dram_size); -#endif - - gd->ram_size = dram_size; - - return 0; -} - -#if defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, struct bd_info *bd) -{ -#ifdef CONFIG_PCI - ft_board_pci_setup(blob, bd); -#endif - ft_cpu_setup(blob, bd); - - return 0; -} -#endif diff --git a/board/xes/xpedite520x/Kconfig b/board/xes/xpedite520x/Kconfig deleted file mode 100644 index 9c0c2461fde8..000000000000 --- a/board/xes/xpedite520x/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_XPEDITE520X - -config SYS_BOARD - default "xpedite520x" - -config SYS_VENDOR - default "xes" - -config SYS_CONFIG_NAME - default "xpedite520x" - -endif diff --git a/board/xes/xpedite520x/MAINTAINERS b/board/xes/xpedite520x/MAINTAINERS deleted file mode 100644 index f7bd437cc66d..000000000000 --- a/board/xes/xpedite520x/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -XPEDITE520X BOARD -M: Peter Tyser ptyser@xes-inc.com -S: Maintained -F: board/xes/xpedite520x/ -F: include/configs/xpedite520x.h -F: configs/xpedite520x_defconfig diff --git a/board/xes/xpedite520x/Makefile b/board/xes/xpedite520x/Makefile deleted file mode 100644 index 12e75da5b3cf..000000000000 --- a/board/xes/xpedite520x/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright 2008 Extreme Engineering Solutions, Inc. -# Copyright 2004 Freescale Semiconductor. -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. - -obj-y += xpedite520x.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o diff --git a/board/xes/xpedite520x/ddr.c b/board/xes/xpedite520x/ddr.c deleted file mode 100644 index c142bec406e5..000000000000 --- a/board/xes/xpedite520x/ddr.c +++ /dev/null @@ -1,68 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright 2008 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <i2c.h> - -#include <fsl_ddr_sdram.h> -#include <fsl_ddr_dimm_params.h> - -void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); - - /* We use soldered memory, but use an SPD EEPROM to describe it. - * The SPD has an unspecified dimm type, but the DDR2 initialization - * code requires a specific type to be specified. This sets the type - * as a standard unregistered SO-DIMM. */ - if (spd->dimm_type == 0) { - spd->dimm_type = 0x4; - ((uchar *)spd)[63] += 0x4; - } -} - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - /* - * Factors to consider for clock adjust: - * - number of chips on bus - * - position of slot - * - DDR1 vs. DDR2? - * - ??? - * - * This needs to be determined on a board-by-board basis. - * 0110 3/4 cycle late - * 0111 7/8 cycle late - */ - popts->clk_adjust = 7; - - /* - * Factors to consider for CPO: - * - frequency - * - ddr1 vs. ddr2 - */ - popts->cpo_override = 9; - - /* - * Factors to consider for write data delay: - * - number of DIMMs - * - * 1 = 1/4 clock delay - * 2 = 1/2 clock delay - * 3 = 3/4 clock delay - * 4 = 1 clock delay - * 5 = 5/4 clock delay - * 6 = 3/2 clock delay - */ - popts->write_data_delay = 3; - - /* - * Factors to consider for half-strength driver enable: - * - number of DIMMs installed - */ - popts->half_strength_driver_enable = 0; -} diff --git a/board/xes/xpedite520x/law.c b/board/xes/xpedite520x/law.c deleted file mode 100644 index 10613ead3f21..000000000000 --- a/board/xes/xpedite520x/law.c +++ /dev/null @@ -1,26 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2008 Extreme Engineering Solutions, Inc. - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - */ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -/* - * Notes: - * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. - * If flash is 8M at default position (last 8M), no LAW needed. - */ - -struct law_entry law_table[] = { - /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */ - SET_LAW(CONFIG_SYS_FLASH_BASE2, LAW_SIZE_256M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_NAND_BASE, LAW_SIZE_1M, LAW_TRGT_IF_LBC), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/xes/xpedite520x/tlb.c b/board/xes/xpedite520x/tlb.c deleted file mode 100644 index d45f532861ea..000000000000 --- a/board/xes/xpedite520x/tlb.c +++ /dev/null @@ -1,68 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2008 Extreme Engineering Solutions, Inc. - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - */ - -#include <common.h> -#include <asm/mmu.h> - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* W**G* - NOR flashes */ - /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE2, CONFIG_SYS_FLASH_BASE2, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G, - 0, 0, BOOKE_PAGESZ_256M, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_1M, 1), - - /* *I*G* - NAND flash */ - SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 2, BOOKE_PAGESZ_1M, 1), - -#if CONFIG_PCI1 - /* *I*G* - PCI MEM */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_1G, 1), -#endif - -#if CONFIG_PCI2 - /* *I*G* - PCI MEM */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_256M, 1), -#endif - -#if defined(CONFIG_PCI1) || defined(CONFIG_PCI2) - /* *I*G* - PCI IO */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_16M, 1), -#endif -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/xes/xpedite520x/xpedite520x.c b/board/xes/xpedite520x/xpedite520x.c deleted file mode 100644 index 63e1e0efe54c..000000000000 --- a/board/xes/xpedite520x/xpedite520x.c +++ /dev/null @@ -1,82 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2008 Extreme Engineering Solutions, Inc. - * Copyright 2004, 2007 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <command.h> -#include <init.h> -#include <pci.h> -#include <asm/processor.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_pci.h> -#include <asm/io.h> -#include <asm/cache.h> -#include <asm/mmu.h> -#include <linux/libfdt.h> -#include <fdt_support.h> -#include <pca953x.h> - -extern void ft_board_pci_setup(void *blob, struct bd_info *bd); - -static void flash_cs_fixup(void) -{ - int flash_sel; - - /* - * Print boot dev and swap flash flash chip selects if booted from 2nd - * flash. Swapping chip selects presents user with a common memory - * map regardless of which flash was booted from. - */ - flash_sel = !((pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) & - CONFIG_SYS_PCA953X_FLASH_PASS_CS)); - printf("Flash: Executed from flash%d\n", flash_sel ? 2 : 1); - - if (flash_sel) { - set_lbc_br(0, CONFIG_SYS_BR1_PRELIM); - set_lbc_or(0, CONFIG_SYS_OR1_PRELIM); - - set_lbc_br(1, CONFIG_SYS_BR0_PRELIM); - set_lbc_or(1, CONFIG_SYS_OR0_PRELIM); - } -} - -int board_early_init_r(void) -{ - /* Initialize PCA9557 devices */ - pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR0, 0xff, 0); - pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR1, 0xff, 0); - - /* - * Remap NOR flash region to caching-inhibited - * so that flash can be erased/programmed properly. - */ - - /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); - - /* Invalidate existing TLB entry for NOR flash */ - disable_tlb(0); - set_tlb(1, (CONFIG_SYS_FLASH_BASE2 & 0xf0000000), - (CONFIG_SYS_FLASH_BASE2 & 0xf0000000), - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_256M, 1); - - flash_cs_fixup(); - - return 0; -} - -#if defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, struct bd_info *bd) -{ -#ifdef CONFIG_PCI - ft_board_pci_setup(blob, bd); -#endif - ft_cpu_setup(blob, bd); - - return 0; -} -#endif diff --git a/board/xes/xpedite537x/Kconfig b/board/xes/xpedite537x/Kconfig deleted file mode 100644 index 35b3917a6da9..000000000000 --- a/board/xes/xpedite537x/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_XPEDITE537X - -config SYS_BOARD - default "xpedite537x" - -config SYS_VENDOR - default "xes" - -config SYS_CONFIG_NAME - default "xpedite537x" - -endif diff --git a/board/xes/xpedite537x/MAINTAINERS b/board/xes/xpedite537x/MAINTAINERS deleted file mode 100644 index b6123acc0f99..000000000000 --- a/board/xes/xpedite537x/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -XPEDITE537X BOARD -M: Peter Tyser ptyser@xes-inc.com -S: Maintained -F: board/xes/xpedite537x/ -F: include/configs/xpedite537x.h -F: configs/xpedite537x_defconfig diff --git a/board/xes/xpedite537x/Makefile b/board/xes/xpedite537x/Makefile deleted file mode 100644 index 82575cf05ec6..000000000000 --- a/board/xes/xpedite537x/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright 2008 Extreme Engineering Solutions, Inc. -# Copyright 2007 Freescale Semiconductor, Inc. -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. - -obj-y += xpedite537x.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o diff --git a/board/xes/xpedite537x/ddr.c b/board/xes/xpedite537x/ddr.c deleted file mode 100644 index f55102a072e9..000000000000 --- a/board/xes/xpedite537x/ddr.c +++ /dev/null @@ -1,234 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2008 Extreme Engineering Solutions, Inc. - * Copyright 2008 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <i2c.h> -#include <log.h> - -#include <fsl_ddr_sdram.h> -#include <fsl_ddr_dimm_params.h> - -void get_spd(ddr2_spd_eeprom_t *spd, u8 i2c_address) -{ - i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd, - sizeof(ddr2_spd_eeprom_t)); -} - -/* - * There are four board-specific SDRAM timing parameters which must be - * calculated based on the particular PCB artwork. These are: - * 1.) CPO (Read Capture Delay) - * - TIMING_CFG_2 register - * Source: Calculation based on board trace lengths and - * chip-specific internal delays. - * 2.) WR_DATA_DELAY (Write Command to Data Strobe Delay) - * - TIMING_CFG_2 register - * Source: Calculation based on board trace lengths. - * Unless clock and DQ lanes are very different - * lengths (>2"), this should be set to the nominal value - * of 1/2 clock delay. - * 3.) CLK_ADJUST (Clock and Addr/Cmd alignment control) - * - DDR_SDRAM_CLK_CNTL register - * Source: Signal Integrity Simulations - * 4.) 2T Timing on Addr/Ctl - * - TIMING_CFG_2 register - * Source: Signal Integrity Simulations - * Usually only needed with heavy load/very high speed (>DDR2-800) - * - * ====== XPedite5370 DDR2-600 read delay calculations ====== - * - * See Freescale's App Note AN2583 as refrence. This document also - * contains the chip-specific delays for 8548E, 8572, etc. - * - * For MPC8572E - * Minimum chip delay (Ch 0): 1.372ns - * Maximum chip delay (Ch 0): 2.914ns - * Minimum chip delay (Ch 1): 1.220ns - * Maximum chip delay (Ch 1): 2.595ns - * - * CLK adjust = 5 (from simulations) = 5/8* 3.33ns = 2080ps - * - * Minimum delay calc (Ch 0): - * clock prop - dram skew + min dqs prop delay + clk_adjust + min chip dly - * 2.3" * 180 - 400ps + 1.9" * 180 + 2080ps + 1372ps - * = 3808ps - * = 3.808ns - * - * Maximum delay calc (Ch 0): - * clock prop + dram skew + max dqs prop delay + clk_adjust + max chip dly - * 2.3" * 180 + 400ps + 2.4" * 180 + 2080ps + 2914ps - * = 6240ps - * = 6.240ns - * - * Minimum delay calc (Ch 1): - * clock prop - dram skew + min dqs prop delay + clk_adjust + min chip dly - * 1.46" * 180- 400ps + 0.7" * 180 + 2080ps + 1220ps - * = 3288ps - * = 3.288ns - * - * Maximum delay calc (Ch 1): - * clock prop + dram skew + max dqs prop delay + clk_adjust + min chip dly - * 1.46" * 180+ 400ps + 1.1" * 180 + 2080ps + 2595ps - * = 5536ps - * = 5.536ns - * - * Ch.0: 3.808ns to 6.240ns additional delay needed (pick 5ns as target) - * This is 1.5 clock cycles, pick CPO = READ_LAT + 3/2 (0x8) - * Ch.1: 3.288ns to 5.536ns additional delay needed (pick 4.4ns as target) - * This is 1.32 clock cycles, pick CPO = READ_LAT + 5/4 (0x7) - * - * - * ====== XPedite5370 DDR2-800 read delay calculations ====== - * - * See Freescale's App Note AN2583 as refrence. This document also - * contains the chip-specific delays for 8548E, 8572, etc. - * - * For MPC8572E - * Minimum chip delay (Ch 0): 1.372ns - * Maximum chip delay (Ch 0): 2.914ns - * Minimum chip delay (Ch 1): 1.220ns - * Maximum chip delay (Ch 1): 2.595ns - * - * CLK adjust = 5 (from simulations) = 5/8* 2.5ns = 1563ps - * - * Minimum delay calc (Ch 0): - * clock prop - dram skew + min dqs prop delay + clk_adjust + min chip dly - * 2.3" * 180 - 350ps + 1.9" * 180 + 1563ps + 1372ps - * = 3341ps - * = 3.341ns - * - * Maximum delay calc (Ch 0): - * clock prop + dram skew + max dqs prop delay + clk_adjust + max chip dly - * 2.3" * 180 + 350ps + 2.4" * 180 + 1563ps + 2914ps - * = 5673ps - * = 5.673ns - * - * Minimum delay calc (Ch 1): - * clock prop - dram skew + min dqs prop delay + clk_adjust + min chip dly - * 1.46" * 180- 350ps + 0.7" * 180 + 1563ps + 1220ps - * = 2822ps - * = 2.822ns - * - * Maximum delay calc (Ch 1): - * clock prop + dram skew + max dqs prop delay + clk_adjust + min chip dly - * 1.46" * 180+ 350ps + 1.1" * 180 + 1563ps + 2595ps - * = 4968ps - * = 4.968ns - * - * Ch.0: 3.341ns to 5.673ns additional delay needed (pick 4.5ns as target) - * This is 1.8 clock cycles, pick CPO = READ_LAT + 7/4 (0x9) - * Ch.1: 2.822ns to 4.968ns additional delay needed (pick 3.9ns as target) - * This is 1.56 clock cycles, pick CPO = READ_LAT + 3/2 (0x8) - * - * Write latency (WR_DATA_DELAY) is calculated by doing the following: - * - * The DDR SDRAM specification requires DQS be received no sooner than - * 75% of an SDRAM clock period—and no later than 125% of a clock - * period—from the capturing clock edge of the command/address at the - * SDRAM. - * - * Based on the above tracelengths, the following are calculated: - * Ch. 0 8572 to DRAM propagation (DQ lanes) : 1.9" * 180 = 0.342ns - * Ch. 0 8572 to DRAM propagation (CLKs) : 2.3" * 180 = 0.414ns - * Ch. 1 8572 to DRAM propagation (DQ lanes) : 0.7" * 180 = 0.126ns - * Ch. 1 8572 to DRAM propagation (CLKs ) : 1.47" * 180 = 0.264ns - * - * Difference in arrival time CLK vs. DQS: - * Ch. 0 0.072ns - * Ch. 1 0.138ns - * - * Both of these values are much less than 25% of the clock - * period at DDR2-600 or DDR2-800, so no additional delay is needed over - * the 1/2 cycle which normally aligns the first DQS transition - * exactly WL (CAS latency minus one cycle) after the CAS strobe. - * See Figure 9-53 in MPC8572E manual: "1/2 delay" in Freescale's - * terminology corresponds to exactly one clock period delay after - * the CAS strobe. (due to the fact that the "delay" is referenced - * from the *falling* edge of the CLK, just after the rising edge - * which the CAS strobe is latched on. - */ - -typedef struct board_memctl_options { - uint16_t datarate_mhz_low; - uint16_t datarate_mhz_high; - uint8_t clk_adjust; - uint8_t cpo_override; - uint8_t write_data_delay; -} board_memctl_options_t; - -static struct board_memctl_options bopts_ctrl[][2] = { - { - /* Controller 0 */ - { - /* DDR2 600/667 */ - .datarate_mhz_low = 500, - .datarate_mhz_high = 750, - .clk_adjust = 5, - .cpo_override = 8, - .write_data_delay = 2, - }, - { - /* DDR2 800 */ - .datarate_mhz_low = 750, - .datarate_mhz_high = 850, - .clk_adjust = 5, - .cpo_override = 9, - .write_data_delay = 2, - }, - }, - { - /* Controller 1 */ - { - /* DDR2 600/667 */ - .datarate_mhz_low = 500, - .datarate_mhz_high = 750, - .clk_adjust = 5, - .cpo_override = 7, - .write_data_delay = 2, - }, - { - /* DDR2 800 */ - .datarate_mhz_low = 750, - .datarate_mhz_high = 850, - .clk_adjust = 5, - .cpo_override = 8, - .write_data_delay = 2, - }, - }, -}; - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - struct board_memctl_options *bopts = bopts_ctrl[ctrl_num]; - sys_info_t sysinfo; - int i; - unsigned int datarate; - - get_sys_info(&sysinfo); - datarate = sysinfo.freq_ddrbus / 1000 / 1000; - - for (i = 0; i < ARRAY_SIZE(bopts_ctrl[ctrl_num]); i++) { - if ((bopts[i].datarate_mhz_low <= datarate) && - (bopts[i].datarate_mhz_high >= datarate)) { - debug("controller %d:\n", ctrl_num); - debug(" clk_adjust = %d\n", bopts[i].clk_adjust); - debug(" cpo = %d\n", bopts[i].cpo_override); - debug(" write_data_delay = %d\n", - bopts[i].write_data_delay); - popts->clk_adjust = bopts[i].clk_adjust; - popts->cpo_override = bopts[i].cpo_override; - popts->write_data_delay = bopts[i].write_data_delay; - } - } - - /* - * Factors to consider for half-strength driver enable: - * - number of DIMMs installed - */ - popts->half_strength_driver_enable = 0; -} diff --git a/board/xes/xpedite537x/law.c b/board/xes/xpedite537x/law.c deleted file mode 100644 index a1f375900cbe..000000000000 --- a/board/xes/xpedite537x/law.c +++ /dev/null @@ -1,25 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2008 Extreme Engineering Solutions, Inc. - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - */ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -/* - * Notes: - * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. - * If flash is 8M at default position (last 8M), no LAW needed. - */ - -struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_FLASH_BASE2, LAW_SIZE_256M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_NAND_BASE, LAW_SIZE_1M, LAW_TRGT_IF_LBC), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/xes/xpedite537x/tlb.c b/board/xes/xpedite537x/tlb.c deleted file mode 100644 index 6d50360f069c..000000000000 --- a/board/xes/xpedite537x/tlb.c +++ /dev/null @@ -1,82 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2008 Extreme Engineering Solutions, Inc. - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - */ - -#include <common.h> -#include <asm/mmu.h> - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* W**G* - NOR flashes */ - /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE2, CONFIG_SYS_FLASH_BASE2, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G, - 0, 0, BOOKE_PAGESZ_256M, 1), - - /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_1M, 1), - - /* *I*G* - NAND flash */ - SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 2, BOOKE_PAGESZ_1M, 1), - - /* **M** - Boot page for secondary processors */ - SET_TLB_ENTRY(1, CONFIG_BPTR_VIRT_ADDR, CONFIG_BPTR_VIRT_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, - 0, 3, BOOKE_PAGESZ_4K, 1), - -#ifdef CONFIG_PCIE1 - /* *I*G* - PCIe */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_PHYS, CONFIG_SYS_PCIE1_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_1G, 1), -#endif - -#ifdef CONFIG_PCIE2 - /* *I*G* - PCIe */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE2_MEM_PHYS, CONFIG_SYS_PCIE2_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_256M, 1), -#endif - -#ifdef CONFIG_PCIE3 - /* *I*G* - PCIe */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS, CONFIG_SYS_PCIE3_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_256M, 1), -#endif - -#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || defined(CONFIG_PCIE3) - /* *I*G* - PCIe */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_PHYS, CONFIG_SYS_PCIE1_IO_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 7, BOOKE_PAGESZ_64M, 1), -#endif - -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/xes/xpedite537x/xpedite537x.c b/board/xes/xpedite537x/xpedite537x.c deleted file mode 100644 index 437b57d4ff6e..000000000000 --- a/board/xes/xpedite537x/xpedite537x.c +++ /dev/null @@ -1,82 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2008 Extreme Engineering Solutions, Inc. - */ - -#include <common.h> -#include <command.h> -#include <init.h> -#include <asm/processor.h> -#include <asm/mmu.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_pci.h> -#include <asm/io.h> -#include <asm/cache.h> -#include <linux/libfdt.h> -#include <fdt_support.h> -#include <pca953x.h> - -extern void ft_board_pci_setup(void *blob, struct bd_info *bd); - -static void flash_cs_fixup(void) -{ - int flash_sel; - - /* - * Print boot dev and swap flash flash chip selects if booted from 2nd - * flash. Swapping chip selects presents user with a common memory - * map regardless of which flash was booted from. - */ - flash_sel = !((pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) & - CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS)); - printf("Flash: Executed from flash%d\n", flash_sel ? 2 : 1); - - if (flash_sel) { - set_lbc_br(0, CONFIG_SYS_BR1_PRELIM); - set_lbc_or(0, CONFIG_SYS_OR1_PRELIM); - - set_lbc_br(1, CONFIG_SYS_BR0_PRELIM); - set_lbc_or(1, CONFIG_SYS_OR0_PRELIM); - } -} - -int board_early_init_r(void) -{ - /* Initialize PCA9557 devices */ - pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR0, 0xff, 0); - pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR1, 0xff, 0); - pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR2, 0xff, 0); - pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR3, 0xff, 0); - - /* - * Remap NOR flash region to caching-inhibited - * so that flash can be erased/programmed properly. - */ - - /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); - - /* Invalidate existing TLB entry for NOR flash */ - disable_tlb(0); - set_tlb(1, (CONFIG_SYS_FLASH_BASE2 & 0xf0000000), - (CONFIG_SYS_FLASH_BASE2 & 0xf0000000), - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_256M, 1); - - flash_cs_fixup(); - - return 0; -} - -#if defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, struct bd_info *bd) -{ -#ifdef CONFIG_PCI - ft_board_pci_setup(blob, bd); -#endif - ft_cpu_setup(blob, bd); - - return 0; -} -#endif diff --git a/board/xes/xpedite550x/Kconfig b/board/xes/xpedite550x/Kconfig deleted file mode 100644 index 1b00137a48c2..000000000000 --- a/board/xes/xpedite550x/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_XPEDITE550X - -config SYS_BOARD - default "xpedite550x" - -config SYS_VENDOR - default "xes" - -config SYS_CONFIG_NAME - default "xpedite550x" - -endif diff --git a/board/xes/xpedite550x/MAINTAINERS b/board/xes/xpedite550x/MAINTAINERS deleted file mode 100644 index 017f3687578b..000000000000 --- a/board/xes/xpedite550x/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -XPEDITE550X BOARD -M: Peter Tyser ptyser@xes-inc.com -S: Maintained -F: board/xes/xpedite550x/ -F: include/configs/xpedite550x.h -F: configs/xpedite550x_defconfig diff --git a/board/xes/xpedite550x/Makefile b/board/xes/xpedite550x/Makefile deleted file mode 100644 index 1aacb375cc50..000000000000 --- a/board/xes/xpedite550x/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright 2007-2008 Freescale Semiconductor, Inc. - -obj-y += xpedite550x.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o diff --git a/board/xes/xpedite550x/ddr.c b/board/xes/xpedite550x/ddr.c deleted file mode 100644 index ad52c9455b8b..000000000000 --- a/board/xes/xpedite550x/ddr.c +++ /dev/null @@ -1,135 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2010 Extreme Engineering Solutions, Inc. - * Copyright 2007-2008 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <i2c.h> - -#include <fsl_ddr_sdram.h> -#include <fsl_ddr_dimm_params.h> - -void get_spd(ddr3_spd_eeprom_t *spd, u8 i2c_address) -{ - i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd, - sizeof(ddr3_spd_eeprom_t)); -} - -/* - * There are traditionally three board-specific SDRAM timing parameters - * which must be calculated based on the particular PCB artwork. These are: - * 1.) CPO (Read Capture Delay) - * - TIMING_CFG_2 register - * Source: Calculation based on board trace lengths and - * chip-specific internal delays. - * 2.) CLK_ADJUST (Clock and Addr/Cmd alignment control) - * - DDR_SDRAM_CLK_CNTL register - * Source: Signal Integrity Simulations - * 3.) 2T Timing on Addr/Ctl - * - TIMING_CFG_2 register - * Source: Signal Integrity Simulations - * Usually only needed with heavy load/very high speed (>DDR2-800) - * - * ====== XPedite550x DDR3-800 read delay calculations ====== - * - * The P2020 processor provides an autoleveling option. Setting CPO to - * 0x1f enables this auto configuration. - */ - -typedef struct { - unsigned short datarate_mhz_low; - unsigned short datarate_mhz_high; - unsigned char clk_adjust; - unsigned char cpo; -} board_specific_parameters_t; - -const board_specific_parameters_t board_specific_parameters[][20] = { - { - /* Controller 0 */ - { - /* DDR3-600/667 */ - .datarate_mhz_low = 500, - .datarate_mhz_high = 750, - .clk_adjust = 5, - .cpo = 31, - }, - { - /* DDR3-800 */ - .datarate_mhz_low = 750, - .datarate_mhz_high = 850, - .clk_adjust = 5, - .cpo = 31, - }, - }, -}; - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - const board_specific_parameters_t *pbsp = - &(board_specific_parameters[ctrl_num][0]); - u32 num_params = sizeof(board_specific_parameters[ctrl_num]) / - sizeof(board_specific_parameters[0][0]); - u32 i; - ulong ddr_freq; - - /* - * Set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in - * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If - * there are two dimms in the controller, set odt_rd_cfg to 3 and - * odt_wr_cfg to 3 for the even CS, 0 for the odd CS. - */ - for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { - if (i&1) { /* odd CS */ - popts->cs_local_opts[i].odt_rd_cfg = 0; - popts->cs_local_opts[i].odt_wr_cfg = 0; - } else { /* even CS */ - if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) { - popts->cs_local_opts[i].odt_rd_cfg = 0; - popts->cs_local_opts[i].odt_wr_cfg = 4; - } else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) { - popts->cs_local_opts[i].odt_rd_cfg = 3; - popts->cs_local_opts[i].odt_wr_cfg = 3; - } - } - } - - /* - * Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr - * freqency and n_banks specified in board_specific_parameters table. - */ - ddr_freq = get_ddr_freq(0) / 1000000; - - for (i = 0; i < num_params; i++) { - if (ddr_freq >= pbsp->datarate_mhz_low && - ddr_freq <= pbsp->datarate_mhz_high) { - popts->clk_adjust = pbsp->clk_adjust; - popts->cpo_override = pbsp->cpo; - popts->twot_en = 0; - break; - } - pbsp++; - } - - if (i == num_params) { - printf("Warning: board specific timing not found " - "for data rate %lu MT/s!\n", ddr_freq); - } - - /* - * Factors to consider for half-strength driver enable: - * - number of DIMMs installed - */ - popts->half_strength_driver_enable = 0; - - /* - * Enable on-die termination. - * From the Micron Technical Node TN-41-04, RTT_Nom should typically - * be 30 to 40 ohms, while RTT_WR should be 120 ohms. Setting RTT_WR - * is handled in the Freescale DDR3 driver. Set RTT_Nom here. - */ - popts->rtt_override = 1; - popts->rtt_override_value = 3; -} diff --git a/board/xes/xpedite550x/law.c b/board/xes/xpedite550x/law.c deleted file mode 100644 index 1e2d604d9d48..000000000000 --- a/board/xes/xpedite550x/law.c +++ /dev/null @@ -1,25 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2010 Extreme Engineering Solutions, Inc. - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - */ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -/* - * Notes: - * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. - * If flash is 8M at default position (last 8M), no LAW needed. - */ - -struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_FLASH_BASE2, LAW_SIZE_256M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_NAND_BASE, LAW_SIZE_1M, LAW_TRGT_IF_LBC), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/xes/xpedite550x/tlb.c b/board/xes/xpedite550x/tlb.c deleted file mode 100644 index 7cb6cd677067..000000000000 --- a/board/xes/xpedite550x/tlb.c +++ /dev/null @@ -1,81 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2008 Extreme Engineering Solutions, Inc. - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - */ - -#include <common.h> -#include <asm/mmu.h> - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* W**G* - NOR flashes */ - /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE2, CONFIG_SYS_FLASH_BASE2, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G, - 0, 0, BOOKE_PAGESZ_256M, 1), - - /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_1M, 1), - - /* *I*G* - NAND flash */ - SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 2, BOOKE_PAGESZ_1M, 1), - - /* **M** - Boot page for secondary processors */ - SET_TLB_ENTRY(1, CONFIG_BPTR_VIRT_ADDR, CONFIG_BPTR_VIRT_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, - 0, 3, BOOKE_PAGESZ_4K, 1), - -#ifdef CONFIG_PCIE1 - /* *I*G* - PCIe */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_PHYS, CONFIG_SYS_PCIE1_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_1G, 1), -#endif - -#ifdef CONFIG_PCIE2 - /* *I*G* - PCIe */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE2_MEM_PHYS, CONFIG_SYS_PCIE2_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_256M, 1), -#endif - -#ifdef CONFIG_PCIE3 - /* *I*G* - PCIe */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS, CONFIG_SYS_PCIE3_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_256M, 1), -#endif - -#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || defined(CONFIG_PCIE3) - /* *I*G* - PCIe */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_PHYS, CONFIG_SYS_PCIE1_IO_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 7, BOOKE_PAGESZ_64M, 1), -#endif -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/xes/xpedite550x/xpedite550x.c b/board/xes/xpedite550x/xpedite550x.c deleted file mode 100644 index 9089a0cc72a0..000000000000 --- a/board/xes/xpedite550x/xpedite550x.c +++ /dev/null @@ -1,82 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2010 Extreme Engineering Solutions, Inc. - */ - -#include <common.h> -#include <command.h> -#include <init.h> -#include <asm/processor.h> -#include <asm/mmu.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_pci.h> -#include <asm/io.h> -#include <asm/cache.h> -#include <linux/libfdt.h> -#include <fdt_support.h> -#include <pca953x.h> - -extern void ft_board_pci_setup(void *blob, struct bd_info *bd); - -static void flash_cs_fixup(void) -{ - int flash_sel; - - /* - * Print boot dev and swap flash flash chip selects if booted from 2nd - * flash. Swapping chip selects presents user with a common memory - * map regardless of which flash was booted from. - */ - flash_sel = !((pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) & - CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS)); - printf("Flash: Executed from flash%d\n", flash_sel ? 2 : 1); - - if (flash_sel) { - set_lbc_br(0, CONFIG_SYS_BR1_PRELIM); - set_lbc_or(0, CONFIG_SYS_OR1_PRELIM); - - set_lbc_br(1, CONFIG_SYS_BR0_PRELIM); - set_lbc_or(1, CONFIG_SYS_OR0_PRELIM); - } -} - -int board_early_init_r(void) -{ - /* Initialize PCA9557 devices */ - pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR0, 0xff, 0); - pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR1, 0xff, 0); - pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR2, 0xff, 0); - pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR3, 0xff, 0); - - /* - * Remap NOR flash region to caching-inhibited - * so that flash can be erased/programmed properly. - */ - - /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); - - /* Invalidate existing TLB entry for NOR flash */ - disable_tlb(0); - set_tlb(1, (CONFIG_SYS_FLASH_BASE2 & 0xf0000000), - (CONFIG_SYS_FLASH_BASE2 & 0xf0000000), - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_256M, 1); - - flash_cs_fixup(); - - return 0; -} - -#if defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, struct bd_info *bd) -{ -#ifdef CONFIG_PCI - ft_board_pci_setup(blob, bd); -#endif - ft_cpu_setup(blob, bd); - - return 0; -} -#endif diff --git a/configs/xpedite517x_defconfig b/configs/xpedite517x_defconfig deleted file mode 100644 index caf95458b4d2..000000000000 --- a/configs/xpedite517x_defconfig +++ /dev/null @@ -1,54 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xfff00000 -CONFIG_ENV_SIZE=0x8000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_MPC86xx=y -CONFIG_HIGH_BATS=y -CONFIG_TARGET_XPEDITE517X=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=3 -CONFIG_USE_PREBOOT=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_HUSH_PARSER=y -# CONFIG_AUTO_COMPLETE is not set -CONFIG_CMD_IMLS=y -CONFIG_CMD_ASKENV=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_I2C=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_SNTP=y -CONFIG_CMD_DATE=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_IRQ=y -CONFIG_ENV_ADDR=0xFFF80000 -CONFIG_CMD_PCA953X=y -CONFIG_DS4510=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MTD_RAW_NAND=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_PANIC_HANG=y -CONFIG_OF_LIBFDT=y diff --git a/configs/xpedite520x_defconfig b/configs/xpedite520x_defconfig deleted file mode 100644 index 87f2e4d8a619..000000000000 --- a/configs/xpedite520x_defconfig +++ /dev/null @@ -1,54 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFFF80000 -CONFIG_ENV_SIZE=0x8000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_MPC85xx=y -# CONFIG_CMD_ERRATA is not set -CONFIG_TARGET_XPEDITE520X=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=3 -CONFIG_USE_PREBOOT=y -CONFIG_BOARD_EARLY_INIT_R=y -# CONFIG_MISC_INIT_R is not set -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_ASKENV=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_I2C=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_SNTP=y -CONFIG_CMD_DATE=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_JFFS2=y -# CONFIG_CMD_IRQ is not set -CONFIG_ENV_ADDR=0xFFF40000 -CONFIG_CMD_PCA953X=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MTD_RAW_NAND=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_PANIC_HANG=y -CONFIG_OF_LIBFDT=y diff --git a/configs/xpedite537x_defconfig b/configs/xpedite537x_defconfig deleted file mode 100644 index 17c4b2c3f71f..000000000000 --- a/configs/xpedite537x_defconfig +++ /dev/null @@ -1,57 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFFF80000 -CONFIG_ENV_SIZE=0x8000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_MPC85xx=y -# CONFIG_CMD_ERRATA is not set -CONFIG_TARGET_XPEDITE537X=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=3 -CONFIG_USE_PREBOOT=y -CONFIG_BOARD_EARLY_INIT_R=y -# CONFIG_MISC_INIT_R is not set -CONFIG_HUSH_PARSER=y -CONFIG_CMD_REGINFO=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_ASKENV=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_I2C=y -CONFIG_CMD_PCI=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_SNTP=y -CONFIG_CMD_DATE=y -CONFIG_MP=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_JFFS2=y -# CONFIG_CMD_IRQ is not set -CONFIG_ENV_ADDR=0xFFF40000 -CONFIG_SYS_FSL_DDR2=y -CONFIG_CMD_PCA953X=y -CONFIG_DS4510=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MTD_RAW_NAND=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_PANIC_HANG=y -CONFIG_OF_LIBFDT=y diff --git a/configs/xpedite550x_defconfig b/configs/xpedite550x_defconfig deleted file mode 100644 index be528151b91b..000000000000 --- a/configs/xpedite550x_defconfig +++ /dev/null @@ -1,57 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFFF80000 -CONFIG_ENV_SIZE=0x8000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_MPC85xx=y -# CONFIG_CMD_ERRATA is not set -CONFIG_TARGET_XPEDITE550X=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=3 -CONFIG_USE_PREBOOT=y -CONFIG_BOARD_EARLY_INIT_R=y -# CONFIG_MISC_INIT_R is not set -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_ASKENV=y -CONFIG_CMD_I2C=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_SNTP=y -CONFIG_CMD_DATE=y -CONFIG_MP=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_JFFS2=y -# CONFIG_CMD_IRQ is not set -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_ENV_ADDR=0xFFF40000 -CONFIG_CMD_PCA953X=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MTD_RAW_NAND=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_PANIC_HANG=y -CONFIG_OF_LIBFDT=y diff --git a/drivers/ddr/fsl/Kconfig b/drivers/ddr/fsl/Kconfig index 8b480dfd6901..890e62190b1a 100644 --- a/drivers/ddr/fsl/Kconfig +++ b/drivers/ddr/fsl/Kconfig @@ -41,7 +41,6 @@ config SYS_NUM_DDR_CTLRS ARCH_T4240 default 2 if ARCH_B4860 || \ ARCH_BSC9132 || \ - ARCH_MPC8572 || \ ARCH_MPC8641 || \ ARCH_P4080 || \ ARCH_P5040 || \ diff --git a/env/Kconfig b/env/Kconfig index ea0ee1e8bafa..c06b8ba8cb7e 100644 --- a/env/Kconfig +++ b/env/Kconfig @@ -85,7 +85,7 @@ config ENV_IS_IN_FLASH default y if M548x || M547x || M5282 default y if MCF532x || MCF52x2 default y if MPC86xx || MPC83xx - default y if ARCH_MPC8572 || ARCH_MPC8548 || ARCH_MPC8641 + default y if ARCH_MPC8548 || ARCH_MPC8641 default y if SH && !CPU_SH4 help Define this if you have a flash device which you want to use for the diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h deleted file mode 100644 index d3bb92964e04..000000000000 --- a/include/configs/xpedite517x.h +++ /dev/null @@ -1,646 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2009 Extreme Engineering Solutions, Inc. - * Copyright 2007-2008 Freescale Semiconductor, Inc. - */ - -/* - * xpedite517x board configuration file - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_SYS_BOARD_NAME "XPedite5170" -#define CONFIG_SYS_FORM_3U_VPX 1 -#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ -#define CONFIG_BAT_RW 1 /* Use common BAT rw code */ -#define CONFIG_ALTIVEC 1 - -#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ -#define CONFIG_PCIE1 1 /* PCIE controller 1 */ -#define CONFIG_PCIE2 1 /* PCIE controller 2 */ -#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ -#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ - -/* - * DDR config - */ -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ -#define CONFIG_DDR_SPD -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#define SPD_EEPROM_ADDRESS1 0x54 /* Both channels use the */ -#define SPD_EEPROM_ADDRESS2 0x54 /* same SPD data */ -#define SPD_EEPROM_OFFSET 0x200 /* OFFSET of SPD in EEPROM */ -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 1 -#define CONFIG_DDR_ECC -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_MAX_DDR_BAT_SIZE 0x80000000 /* BAT mapping size */ - -/* - * virtual address to be used for temporary mappings. There - * should be 128k free at this VA. - */ -#define CONFIG_SYS_SCRATCH_VA 0xe0000000 - -#ifndef __ASSEMBLY__ -#include <linux/stringify.h> -extern unsigned long get_board_sys_clk(unsigned long dummy); -#endif - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC86xx */ - -/* - * L2CR setup - */ -#define CONFIG_SYS_L2 -#define L2_INIT 0 -#define L2_ENABLE (L2CR_L2E) - -/* - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - */ -#define CONFIG_SYS_CCSRBAR 0xef000000 /* relocated CCSRBAR */ -#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR -#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0 -#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR - -/* - * Diagnostics - */ -#define CONFIG_POST (CONFIG_SYS_POST_MEMORY |\ - CONFIG_SYS_POST_I2C) -/* The XPedite5170 can host an XMC which has an EEPROM at address 0x50 */ -#define I2C_ADDR_IGNORE_LIST {0x50} - -/* - * Memory map - * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable - * 0x8000_0000 0xbfff_ffff PCIe1 Mem 1G non-cacheable - * 0xc000_0000 0xcfff_ffff PCIe2 Mem 256M non-cacheable - * 0xe000_0000 0xe7ff_ffff SRAM/SSRAM/L1 Cache 128M non-cacheable - * 0xe800_0000 0xe87f_ffff PCIe1 IO 8M non-cacheable - * 0xe880_0000 0xe8ff_ffff PCIe2 IO 8M non-cacheable - * 0xef00_0000 0xef0f_ffff CCSR/IMMR 1M non-cacheable - * 0xef80_0000 0xef8f_ffff NAND Flash 1M non-cacheable - * 0xf000_0000 0xf7ff_ffff NOR Flash 2 128M non-cacheable - * 0xf800_0000 0xffff_ffff NOR Flash 1 128M non-cacheable - */ - -#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_4 | LCRR_EADC_3) - -/* - * NAND flash configuration - */ -#define CONFIG_SYS_NAND_BASE 0xef800000 -#define CONFIG_SYS_NAND_BASE2 0xef840000 /* Unused at this time */ -#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE2} -#define CONFIG_SYS_MAX_NAND_DEVICE 2 -#define CONFIG_NAND_ACTL -#define CONFIG_SYS_NAND_ACTL_ALE (1 << 14) /* C_LA14 */ -#define CONFIG_SYS_NAND_ACTL_CLE (1 << 15) /* C_LA15 */ -#define CONFIG_SYS_NAND_ACTL_NCE 0 /* NCE not controlled by ADDR */ -#define CONFIG_SYS_NAND_ACTL_DELAY 25 -#define CONFIG_JFFS2_NAND - -/* - * NOR flash configuration - */ -#define CONFIG_SYS_FLASH_BASE 0xf8000000 -#define CONFIG_SYS_FLASH_BASE2 0xf0000000 -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2} -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST { {0xfff00000, 0xc0000}, \ - {0xf7f00000, 0xc0000} } -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#define CONFIG_SYS_MONITOR_BASE_EARLY 0xfff00000 /* early monitor loc */ - -/* - * Chip select configuration - */ -/* NOR Flash 0 on CS0 */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE |\ - BR_PS_16 |\ - BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_128MB |\ - OR_GPCM_CSNT |\ - OR_GPCM_XACS |\ - OR_GPCM_ACS_DIV2 |\ - OR_GPCM_SCY_8 |\ - OR_GPCM_TRLX |\ - OR_GPCM_EHTR |\ - OR_GPCM_EAD) - -/* NOR Flash 1 on CS1 */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FLASH_BASE2 |\ - BR_PS_16 |\ - BR_V) -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM - -/* NAND flash on CS2 */ -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_NAND_BASE |\ - BR_PS_8 |\ - BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_256KB |\ - OR_GPCM_BCTLD |\ - OR_GPCM_CSNT |\ - OR_GPCM_ACS_DIV4 |\ - OR_GPCM_SCY_4 |\ - OR_GPCM_TRLX |\ - OR_GPCM_EHTR) - -/* Optional NAND flash on CS3 */ -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_NAND_BASE2 |\ - BR_PS_8 |\ - BR_V) -#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM - -/* - * Use L1 as initial stack - */ -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xe0000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ - -/* - * Serial Port - */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* - * I2C - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 100000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 100000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 - -/* PEX8518 slave I2C interface */ -#define CONFIG_SYS_I2C_PEX8518_ADDR 0x70 - -/* I2C DS1631 temperature sensor */ -#define CONFIG_SYS_I2C_LM90_ADDR 0x4c - -/* I2C EEPROM - AT24C128B */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 byte pages */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* take up to 10 msec */ - -/* I2C RTC */ -#define CONFIG_RTC_M41T11 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_SYS_M41T11_BASE_YEAR 2000 - -/* GPIO */ -#define CONFIG_PCA953X -#define CONFIG_SYS_I2C_PCA953X_ADDR0 0x18 -#define CONFIG_SYS_I2C_PCA953X_ADDR1 0x1c -#define CONFIG_SYS_I2C_PCA953X_ADDR2 0x1e -#define CONFIG_SYS_I2C_PCA953X_ADDR3 0x1f -#define CONFIG_SYS_I2C_PCA953X_ADDR CONFIG_SYS_I2C_PCA953X_ADDR0 -#define CONFIG_SYS_I2C_PCA9553_ADDR 0x62 - -/* - * PU = pulled high, PD = pulled low - * I = input, O = output, IO = input/output - */ -/* PCA9557 @ 0x18*/ -#define CONFIG_SYS_PCA953X_C0_SER0_EN 0x01 /* PU; UART0 enable (1: enabled) */ -#define CONFIG_SYS_PCA953X_C0_SER0_MODE 0x02 /* PU; UART0 serial mode select */ -#define CONFIG_SYS_PCA953X_C0_SER1_EN 0x04 /* PU; UART1 enable (1: enabled) */ -#define CONFIG_SYS_PCA953X_C0_SER1_MODE 0x08 /* PU; UART1 serial mode select */ -#define CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS 0x10 /* PU; Boot flash CS select */ -#define CONFIG_SYS_PCA953X_NVM_WP 0x20 /* PU; Set to 0 to enable NVM writing */ - -/* PCA9557 @ 0x1c*/ -#define CONFIG_SYS_PCA953X_XMC0_ROOT0 0x01 /* PU; Low if XMC is RC */ -#define CONFIG_SYS_PCA953X_PLUG_GPIO0 0x02 /* Samtec connector GPIO */ -#define CONFIG_SYS_PCA953X_XMC0_WAKE 0x04 /* PU; XMC wake */ -#define CONFIG_SYS_PCA953X_XMC0_BIST 0x08 /* PU; XMC built in self test */ -#define CONFIG_SYS_PCA953X_XMC_PRESENT 0x10 /* PU; Low if XMC module installed */ -#define CONFIG_SYS_PCA953X_PMC_PRESENT 0x20 /* PU; Low if PMC module installed */ -#define CONFIG_SYS_PCA953X_PMC0_MONARCH 0x40 /* PMC monarch mode enable */ -#define CONFIG_SYS_PCA953X_PMC0_EREADY 0x80 /* PU; PMC PCI eready */ - -/* PCA9557 @ 0x1e*/ -#define CONFIG_SYS_PCA953X_P0_GA0 0x01 /* PU; VPX Geographical address */ -#define CONFIG_SYS_PCA953X_P0_GA1 0x02 /* PU; VPX Geographical address */ -#define CONFIG_SYS_PCA953X_P0_GA2 0x04 /* PU; VPX Geographical address */ -#define CONFIG_SYS_PCA953X_P0_GA3 0x08 /* PU; VPX Geographical address */ -#define CONFIG_SYS_PCA953X_P0_GA4 0x10 /* PU; VPX Geographical address */ -#define CONFIG_SYS_PCA953X_P0_GAP 0x20 /* PU; VPX Geographical address parity */ -#define CONFIG_SYS_PCA953X_P1_SYSEN 0x80 /* PU; VPX P1 SYSCON */ - -/* PCA9557 @ 0x1f */ -#define CONFIG_SYS_PCA953X_VPX_GPIO0 0x01 /* PU; VPX P15 GPIO */ -#define CONFIG_SYS_PCA953X_VPX_GPIO1 0x02 /* PU; VPX P15 GPIO */ -#define CONFIG_SYS_PCA953X_VPX_GPIO2 0x04 /* PU; VPX P15 GPIO */ -#define CONFIG_SYS_PCA953X_VPX_GPIO3 0x08 /* PU; VPX P15 GPIO */ - -/* - * General PCI - * Memory space is mapped 1-1, but I/O space must start from 0. - */ -/* PCIE1 - PEX8518 */ -#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x40000000 /* 1G */ -#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE1_IO_PHYS 0xe8000000 -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ - -/* PCIE2 - VPX P1 */ -#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS -#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE2_IO_PHYS 0xe8800000 -#define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 /* 8M */ - -/* - * Networking options - */ -#define CONFIG_ETHPRIME "eTSEC1" - -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC1_PHY_ADDR 1 -#define TSEC1_PHYIDX 0 -#define CONFIG_HAS_ETH0 - -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_PHY_ADDR 2 -#define TSEC2_PHYIDX 0 -#define CONFIG_HAS_ETH1 - -/* - * BAT mappings - */ -#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR) -#define CONFIG_SYS_CCSR_DEFAULT_DBATL (CONFIG_SYS_CCSRBAR_DEFAULT |\ - BATL_PP_RW |\ - BATL_CACHEINHIBIT |\ - BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_CCSR_DEFAULT_DBATU (CONFIG_SYS_CCSRBAR_DEFAULT |\ - BATU_BL_1M |\ - BATU_VS |\ - BATU_VP) -#define CONFIG_SYS_CCSR_DEFAULT_IBATL (CONFIG_SYS_CCSRBAR_DEFAULT |\ - BATL_PP_RW |\ - BATL_CACHEINHIBIT) -#define CONFIG_SYS_CCSR_DEFAULT_IBATU CONFIG_SYS_CCSR_DEFAULT_DBATU -#endif - -/* - * BAT0 2G Cacheable, non-guarded - * 0x0000_0000 2G DDR - */ -#define CONFIG_SYS_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_DBAT0U (BATU_BL_2G | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U CONFIG_SYS_DBAT0U - -/* - * BAT1 1G Cache-inhibited, guarded - * 0x8000_0000 1G PCI-Express 1 Memory - */ -#define CONFIG_SYS_DBAT1L (CONFIG_SYS_PCIE1_MEM_PHYS |\ - BATL_PP_RW |\ - BATL_CACHEINHIBIT |\ - BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT1U (CONFIG_SYS_PCIE1_MEM_PHYS |\ - BATU_BL_1G |\ - BATU_VS |\ - BATU_VP) -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCIE1_MEM_PHYS |\ - BATL_PP_RW |\ - BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U - -/* - * BAT2 512M Cache-inhibited, guarded - * 0xc000_0000 512M PCI-Express 2 Memory - */ -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCIE2_MEM_PHYS |\ - BATL_PP_RW |\ - BATL_CACHEINHIBIT |\ - BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCIE2_MEM_PHYS |\ - BATU_BL_512M |\ - BATU_VS |\ - BATU_VP) -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCIE2_MEM_PHYS |\ - BATL_PP_RW |\ - BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U - -/* - * BAT3 1M Cache-inhibited, guarded - * 0xe000_0000 1M CCSR - */ -#define CONFIG_SYS_DBAT3L (CONFIG_SYS_CCSRBAR |\ - BATL_PP_RW |\ - BATL_CACHEINHIBIT |\ - BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT3U (CONFIG_SYS_CCSRBAR |\ - BATU_BL_1M |\ - BATU_VS |\ - BATU_VP) -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_CCSRBAR |\ - BATL_PP_RW |\ - BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U CONFIG_SYS_DBAT3U - -/* - * BAT4 32M Cache-inhibited, guarded - * 0xe200_0000 16M PCI-Express 1 I/O - * 0xe300_0000 16M PCI-Express 2 I/0 - */ -#define CONFIG_SYS_DBAT4L (CONFIG_SYS_PCIE1_IO_PHYS |\ - BATL_PP_RW |\ - BATL_CACHEINHIBIT |\ - BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCIE1_IO_PHYS |\ - BATU_BL_32M |\ - BATU_VS |\ - BATU_VP) -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCIE1_IO_PHYS |\ - BATL_PP_RW |\ - BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U - -/* - * BAT5 128K Cacheable, non-guarded - * 0xe400_1000 128K Init RAM for stack in the CPU DCache (no backing memory) - */ -#define CONFIG_SYS_DBAT5L (CONFIG_SYS_INIT_RAM_ADDR |\ - BATL_PP_RW |\ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_DBAT5U (CONFIG_SYS_INIT_RAM_ADDR |\ - BATU_BL_128K |\ - BATU_VS |\ - BATU_VP) -#define CONFIG_SYS_IBAT5L CONFIG_SYS_DBAT5L -#define CONFIG_SYS_IBAT5U CONFIG_SYS_DBAT5U - -/* - * BAT6 256M Cache-inhibited, guarded - * 0xf000_0000 256M FLASH - */ -#define CONFIG_SYS_DBAT6L (CONFIG_SYS_FLASH_BASE2 |\ - BATL_PP_RW |\ - BATL_CACHEINHIBIT |\ - BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT6U (CONFIG_SYS_FLASH_BASE |\ - BATU_BL_256M |\ - BATU_VS |\ - BATU_VP) -#define CONFIG_SYS_IBAT6L (CONFIG_SYS_FLASH_BASE |\ - BATL_PP_RW |\ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT6U CONFIG_SYS_DBAT6U - -/* Map the last 1M of flash where we're running from reset */ -#define CONFIG_SYS_DBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY |\ - BATL_PP_RW |\ - BATL_CACHEINHIBIT |\ - BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT6U_EARLY (CONFIG_SYS_TEXT_BASE |\ - BATU_BL_1M |\ - BATU_VS |\ - BATU_VP) -#define CONFIG_SYS_IBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY |\ - BATL_PP_RW |\ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT6U_EARLY CONFIG_SYS_DBAT6U_EARLY - -/* - * BAT7 64M Cache-inhibited, guarded - * 0xe800_0000 64K NAND FLASH - * 0xe804_0000 128K DUART Registers - */ -#define CONFIG_SYS_DBAT7L (CONFIG_SYS_NAND_BASE |\ - BATL_PP_RW |\ - BATL_CACHEINHIBIT |\ - BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT7U (CONFIG_SYS_NAND_BASE |\ - BATU_BL_512K |\ - BATU_VS |\ - BATU_VP) -#define CONFIG_SYS_IBAT7L (CONFIG_SYS_NAND_BASE |\ - BATL_PP_RW |\ - BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT7U CONFIG_SYS_DBAT7U - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ -#define CONFIG_INTEGRITY /* support booting INTEGRITY OS */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ - -/* - * Environment Configuration - */ - -/* - * Flash memory map: - * fffc0000 - ffffffff Pri FDT (256KB) - * fff80000 - fffbffff Pri U-Boot Environment (256 KB) - * fff00000 - fff7ffff Pri U-Boot (512 KB) - * fef00000 - ffefffff Pri OS image (16MB) - * f8000000 - feefffff Pri OS Use/Filesystem (111MB) - * - * f7fc0000 - f7ffffff Sec FDT (256KB) - * f7f80000 - f7fbffff Sec U-Boot Environment (256 KB) - * f7f00000 - f7f7ffff Sec U-Boot (512 KB) - * f6f00000 - f7efffff Sec OS image (16MB) - * f0000000 - f6efffff Sec OS Use/Filesystem (111MB) - */ -#define CONFIG_UBOOT1_ENV_ADDR __stringify(0xfff00000) -#define CONFIG_UBOOT2_ENV_ADDR __stringify(0xf7f00000) -#define CONFIG_FDT1_ENV_ADDR __stringify(0xfffc0000) -#define CONFIG_FDT2_ENV_ADDR __stringify(0xf7fc0000) -#define CONFIG_OS1_ENV_ADDR __stringify(0xfef00000) -#define CONFIG_OS2_ENV_ADDR __stringify(0xf6f00000) - -#define CONFIG_PROG_UBOOT1 \ - "$download_cmd $loadaddr $ubootfile; " \ - "if test $? -eq 0; then " \ - "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ - "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ - "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; " \ - "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ - "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; " \ - "if test $? -ne 0; then " \ - "echo PROGRAM FAILED; " \ - "else; " \ - "echo PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_PROG_UBOOT2 \ - "$download_cmd $loadaddr $ubootfile; " \ - "if test $? -eq 0; then " \ - "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ - "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ - "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; " \ - "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ - "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; " \ - "if test $? -ne 0; then " \ - "echo PROGRAM FAILED; " \ - "else; " \ - "echo PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_BOOT_OS_NET \ - "$download_cmd $osaddr $osfile; " \ - "if test $? -eq 0; then " \ - "if test -n $fdtaddr; then " \ - "$download_cmd $fdtaddr $fdtfile; " \ - "if test $? -eq 0; then " \ - "bootm $osaddr - $fdtaddr; " \ - "else; " \ - "echo FDT DOWNLOAD FAILED; " \ - "fi; " \ - "else; " \ - "bootm $osaddr; " \ - "fi; " \ - "else; " \ - "echo OS DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_PROG_OS1 \ - "$download_cmd $osaddr $osfile; " \ - "if test $? -eq 0; then " \ - "erase "CONFIG_OS1_ENV_ADDR" +$filesize; " \ - "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \ - "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \ - "if test $? -ne 0; then " \ - "echo OS PROGRAM FAILED; " \ - "else; " \ - "echo OS PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo OS DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_PROG_OS2 \ - "$download_cmd $osaddr $osfile; " \ - "if test $? -eq 0; then " \ - "erase "CONFIG_OS2_ENV_ADDR" +$filesize; " \ - "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \ - "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \ - "if test $? -ne 0; then " \ - "echo OS PROGRAM FAILED; " \ - "else; " \ - "echo OS PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo OS DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_PROG_FDT1 \ - "$download_cmd $fdtaddr $fdtfile; " \ - "if test $? -eq 0; then " \ - "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;" \ - "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \ - "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \ - "if test $? -ne 0; then " \ - "echo FDT PROGRAM FAILED; " \ - "else; " \ - "echo FDT PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo FDT DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_PROG_FDT2 \ - "$download_cmd $fdtaddr $fdtfile; " \ - "if test $? -eq 0; then " \ - "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;" \ - "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \ - "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \ - "if test $? -ne 0; then " \ - "echo FDT PROGRAM FAILED; " \ - "else; " \ - "echo FDT PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo FDT DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "autoload=yes\0" \ - "download_cmd=tftp\0" \ - "console_args=console=ttyS0,115200\0" \ - "root_args=root=/dev/nfs rw\0" \ - "misc_args=ip=on\0" \ - "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \ - "bootfile=/home/user/file\0" \ - "osfile=/home/user/board.uImage\0" \ - "fdtfile=/home/user/board.dtb\0" \ - "ubootfile=/home/user/u-boot.bin\0" \ - "fdtaddr=0x1e00000\0" \ - "osaddr=0x1000000\0" \ - "loadaddr=0x1000000\0" \ - "prog_uboot1="CONFIG_PROG_UBOOT1"\0" \ - "prog_uboot2="CONFIG_PROG_UBOOT2"\0" \ - "prog_os1="CONFIG_PROG_OS1"\0" \ - "prog_os2="CONFIG_PROG_OS2"\0" \ - "prog_fdt1="CONFIG_PROG_FDT1"\0" \ - "prog_fdt2="CONFIG_PROG_FDT2"\0" \ - "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0" \ - "bootcmd_flash1=run set_bootargs; " \ - "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\ - "bootcmd_flash2=run set_bootargs; " \ - "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\ - "bootcmd=run bootcmd_flash1\0" -#endif /* __CONFIG_H */ diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h deleted file mode 100644 index c9bd369029dd..000000000000 --- a/include/configs/xpedite520x.h +++ /dev/null @@ -1,445 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2008 Extreme Engineering Solutions, Inc. - * Copyright 2004-2008 Freescale Semiconductor, Inc. - */ - -/* - * xpedite520x board configuration file - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_SYS_BOARD_NAME "XPedite5200" -#define CONFIG_SYS_FORM_PMC_XMC 1 - -#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ -#define CONFIG_PCI1 1 /* PCI controller 1 */ -#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ -#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ - -/* - * DDR config - */ -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ -#define CONFIG_DDR_SPD -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#define SPD_EEPROM_ADDRESS 0x54 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 -#define CONFIG_DDR_ECC -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_VERY_BIG_RAM - -#define CONFIG_SYS_CLK_FREQ 66666666 - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ENABLE_36BIT_PHYS 1 - -#define CONFIG_SYS_CCSRBAR 0xef000000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR - -/* - * Diagnostics - */ -#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \ - CONFIG_SYS_POST_I2C) -#define I2C_ADDR_LIST {CONFIG_SYS_I2C_MAX1237_ADDR, \ - CONFIG_SYS_I2C_EEPROM_ADDR, \ - CONFIG_SYS_I2C_PCA953X_ADDR0, \ - CONFIG_SYS_I2C_PCA953X_ADDR1, \ - CONFIG_SYS_I2C_RTC_ADDR} - -/* - * Memory map - * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable - * 0x8000_0000 0xbfff_ffff PCI1 Mem 1G non-cacheable - * 0xe000_0000 0xe7ff_ffff SRAM/SSRAM/L1 Cache 128M non-cacheable - * 0xe800_0000 0xe87f_ffff PCI1 IO 8M non-cacheable - * 0xef00_0000 0xef0f_ffff CCSR/IMMR 1M non-cacheable - * 0xef80_0000 0xef8f_ffff NAND Flash 1M non-cacheable - * 0xf800_0000 0xfbff_ffff NOR Flash 2 64M non-cacheable - * 0xfc00_0000 0xffff_ffff NOR Flash 1 64M non-cacheable - */ - -#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_8 | LCRR_EADC_3) - -/* - * NAND flash configuration - */ -#define CONFIG_SYS_NAND_BASE 0xef800000 -#define CONFIG_SYS_NAND_BASE2 0xef840000 /* Unused at this time */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_NAND_ACTL -#define CONFIG_SYS_NAND_ACTL_CLE (1 << 3) /* ADDR3 is CLE */ -#define CONFIG_SYS_NAND_ACTL_ALE (1 << 4) /* ADDR4 is ALE */ -#define CONFIG_SYS_NAND_ACTL_NCE (0) /* NCE not controlled by ADDR */ -#define CONFIG_SYS_NAND_ACTL_DELAY 25 - -/* - * NOR flash configuration - */ -#define CONFIG_SYS_FLASH_BASE 0xfc000000 -#define CONFIG_SYS_FLASH_BASE2 0xf8000000 -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2} -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST { {0xfff40000, 0xc0000}, \ - {0xfbf40000, 0xc0000} } -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - -/* - * Chip select configuration - */ -/* NOR Flash 0 on CS0 */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - BR_PS_16 | \ - BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_64MB | \ - OR_GPCM_ACS_DIV4 | \ - OR_GPCM_SCY_8) - -/* NOR Flash 1 on CS1 */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FLASH_BASE2 | \ - BR_PS_16 | \ - BR_V) -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM - -/* NAND flash on CS2 */ -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_NAND_BASE | \ - BR_PS_8 | \ - BR_V) - -/* NAND flash on CS2 */ -#define CONFIG_SYS_OR2_PRELIM (OR_AM_256KB | \ - OR_GPCM_BCTLD | \ - OR_GPCM_CSNT | \ - OR_GPCM_ACS_DIV4 | \ - OR_GPCM_SCY_4 | \ - OR_GPCM_TRLX | \ - OR_GPCM_EHTR) - -/* NAND flash on CS3 */ -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_NAND_BASE2 | \ - BR_PS_8 | \ - BR_V) -#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM - -/* - * Use L1 as initial stack - */ -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xe0000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ - -/* - * Serial Port - */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* - * I2C - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 - -/* I2C EEPROM */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 byte pages */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* take up to 10 msec */ - -/* I2C RTC */ -#define CONFIG_RTC_M41T11 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_SYS_M41T11_BASE_YEAR 2000 - -/* GPIO */ -#define CONFIG_PCA953X -#define CONFIG_SYS_I2C_PCA953X_ADDR0 0x18 -#define CONFIG_SYS_I2C_PCA953X_ADDR1 0x19 -#define CONFIG_SYS_I2C_PCA953X_ADDR CONFIG_SYS_I2C_PCA953X_ADDR0 - -/* PCA957 @ 0x18 */ -#define CONFIG_SYS_PCA953X_BRD_CFG0 0x01 -#define CONFIG_SYS_PCA953X_BRD_CFG1 0x02 -#define CONFIG_SYS_PCA953X_BRD_CFG2 0x04 -#define CONFIG_SYS_PCA953X_XMC_ROOT0 0x08 -#define CONFIG_SYS_PCA953X_FLASH_PASS_CS 0x10 -#define CONFIG_SYS_PCA953X_NVM_WP 0x20 -#define CONFIG_SYS_PCA953X_MONARCH 0x40 -#define CONFIG_SYS_PCA953X_EREADY 0x80 - -/* PCA957 @ 0x19 */ -#define CONFIG_SYS_PCA953X_P14_IO0 0x01 -#define CONFIG_SYS_PCA953X_P14_IO1 0x02 -#define CONFIG_SYS_PCA953X_P14_IO2 0x04 -#define CONFIG_SYS_PCA953X_P14_IO3 0x08 -#define CONFIG_SYS_PCA953X_P14_IO4 0x10 -#define CONFIG_SYS_PCA953X_P14_IO5 0x20 -#define CONFIG_SYS_PCA953X_P14_IO6 0x40 -#define CONFIG_SYS_PCA953X_P14_IO7 0x80 - -/* 12-bit ADC used to measure CPU diode */ -#define CONFIG_SYS_I2C_MAX1237_ADDR 0x34 - -/* - * General PCI - * Memory space is mapped 1-1, but I/O space must start from 0. - */ -#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BUS -#define CONFIG_SYS_PCI1_MEM_SIZE 0x40000000 /* 1G */ -#define CONFIG_SYS_PCI1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCI1_IO_PHYS 0xe8000000 -#define CONFIG_SYS_PCI1_IO_SIZE 0x00800000 /* 1M */ - -/* - * Networking options - */ -#define CONFIG_ETHPRIME "eTSEC1" - -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC1_PHY_ADDR 1 -#define TSEC1_PHYIDX 0 -#define CONFIG_HAS_ETH0 - -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" -#define TSEC2_FLAGS TSEC_GIGABIT -#define TSEC2_PHY_ADDR 2 -#define TSEC2_PHYIDX 0 -#define CONFIG_HAS_ETH1 - -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "eTSEC3" -#define TSEC3_FLAGS TSEC_GIGABIT -#define TSEC3_PHY_ADDR 3 -#define TSEC3_PHYIDX 0 -#define CONFIG_HAS_ETH2 - -#define CONFIG_TSEC4 1 -#define CONFIG_TSEC4_NAME "eTSEC4" -#define TSEC4_FLAGS TSEC_GIGABIT -#define TSEC4_PHY_ADDR 4 -#define TSEC4_PHYIDX 0 -#define CONFIG_HAS_ETH3 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ -#define CONFIG_INTEGRITY /* support booting INTEGRITY OS */ -#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ - -/* - * Environment Configuration - */ - -/* - * Flash memory map: - * fff80000 - ffffffff Pri U-Boot (512 KB) - * fff40000 - fff7ffff Pri U-Boot Environment (256 KB) - * fff00000 - fff3ffff Pri FDT (256KB) - * fef00000 - ffefffff Pri OS image (16MB) - * fc000000 - feefffff Pri OS Use/Filesystem (47MB) - * - * fbf80000 - fbffffff Sec U-Boot (512 KB) - * fbf40000 - fbf7ffff Sec U-Boot Environment (256 KB) - * fbf00000 - fbf3ffff Sec FDT (256KB) - * faf00000 - fbefffff Sec OS image (16MB) - * f8000000 - faefffff Sec OS Use/Filesystem (47MB) - */ -#define CONFIG_UBOOT1_ENV_ADDR __stringify(0xfff80000) -#define CONFIG_UBOOT2_ENV_ADDR __stringify(0xfbf80000) -#define CONFIG_FDT1_ENV_ADDR __stringify(0xfff00000) -#define CONFIG_FDT2_ENV_ADDR __stringify(0xfbf00000) -#define CONFIG_OS1_ENV_ADDR __stringify(0xfef00000) -#define CONFIG_OS2_ENV_ADDR __stringify(0xfaf00000) - -#define CONFIG_PROG_UBOOT1 \ - "$download_cmd $loadaddr $ubootfile; " \ - "if test $? -eq 0; then " \ - "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ - "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ - "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; " \ - "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ - "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; " \ - "if test $? -ne 0; then " \ - "echo PROGRAM FAILED; " \ - "else; " \ - "echo PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_PROG_UBOOT2 \ - "$download_cmd $loadaddr $ubootfile; " \ - "if test $? -eq 0; then " \ - "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ - "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ - "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; " \ - "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ - "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; " \ - "if test $? -ne 0; then " \ - "echo PROGRAM FAILED; " \ - "else; " \ - "echo PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_BOOT_OS_NET \ - "$download_cmd $osaddr $osfile; " \ - "if test $? -eq 0; then " \ - "if test -n $fdtaddr; then " \ - "$download_cmd $fdtaddr $fdtfile; " \ - "if test $? -eq 0; then " \ - "bootm $osaddr - $fdtaddr; " \ - "else; " \ - "echo FDT DOWNLOAD FAILED; " \ - "fi; " \ - "else; " \ - "bootm $osaddr; " \ - "fi; " \ - "else; " \ - "echo OS DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_PROG_OS1 \ - "$download_cmd $osaddr $osfile; " \ - "if test $? -eq 0; then " \ - "erase "CONFIG_OS1_ENV_ADDR" +$filesize; " \ - "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \ - "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \ - "if test $? -ne 0; then " \ - "echo OS PROGRAM FAILED; " \ - "else; " \ - "echo OS PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo OS DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_PROG_OS2 \ - "$download_cmd $osaddr $osfile; " \ - "if test $? -eq 0; then " \ - "erase "CONFIG_OS2_ENV_ADDR" +$filesize; " \ - "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \ - "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \ - "if test $? -ne 0; then " \ - "echo OS PROGRAM FAILED; " \ - "else; " \ - "echo OS PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo OS DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_PROG_FDT1 \ - "$download_cmd $fdtaddr $fdtfile; " \ - "if test $? -eq 0; then " \ - "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;" \ - "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \ - "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \ - "if test $? -ne 0; then " \ - "echo FDT PROGRAM FAILED; " \ - "else; " \ - "echo FDT PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo FDT DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_PROG_FDT2 \ - "$download_cmd $fdtaddr $fdtfile; " \ - "if test $? -eq 0; then " \ - "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;" \ - "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \ - "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \ - "if test $? -ne 0; then " \ - "echo FDT PROGRAM FAILED; " \ - "else; " \ - "echo FDT PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo FDT DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "autoload=yes\0" \ - "download_cmd=tftp\0" \ - "console_args=console=ttyS0,115200\0" \ - "root_args=root=/dev/nfs rw\0" \ - "misc_args=ip=on\0" \ - "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \ - "bootfile=/home/user/file\0" \ - "osfile=/home/user/board.uImage\0" \ - "fdtfile=/home/user/board.dtb\0" \ - "ubootfile=/home/user/u-boot.bin\0" \ - "fdtaddr=0x1e00000\0" \ - "osaddr=0x1000000\0" \ - "loadaddr=0x1000000\0" \ - "prog_uboot1="CONFIG_PROG_UBOOT1"\0" \ - "prog_uboot2="CONFIG_PROG_UBOOT2"\0" \ - "prog_os1="CONFIG_PROG_OS1"\0" \ - "prog_os2="CONFIG_PROG_OS2"\0" \ - "prog_fdt1="CONFIG_PROG_FDT1"\0" \ - "prog_fdt2="CONFIG_PROG_FDT2"\0" \ - "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0" \ - "bootcmd_flash1=run set_bootargs; " \ - "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\ - "bootcmd_flash2=run set_bootargs; " \ - "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\ - "bootcmd=run bootcmd_flash1\0" -#endif /* __CONFIG_H */ diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h deleted file mode 100644 index 7262c86908a2..000000000000 --- a/include/configs/xpedite537x.h +++ /dev/null @@ -1,496 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2008 Extreme Engineering Solutions, Inc. - * Copyright 2007-2008 Freescale Semiconductor, Inc. - */ - -/* - * xpedite537x board configuration file - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_SYS_BOARD_NAME "XPedite5370" -#define CONFIG_SYS_FORM_3U_VPX 1 - -#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ -#define CONFIG_PCIE1 1 /* PCIE controller 1 */ -#define CONFIG_PCIE2 1 /* PCIE controller 2 */ -#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ -#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ - -/* - * Multicore config - */ -#define CONFIG_BPTR_VIRT_ADDR 0xee000000 /* virt boot page address */ -#define CONFIG_MPC8xxx_DISABLE_BPTR /* Don't leave BPTR enabled */ - -/* - * DDR config - */ -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ -#define CONFIG_DDR_SPD -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#define SPD_EEPROM_ADDRESS1 0x54 /* Both channels use the */ -#define SPD_EEPROM_ADDRESS2 0x54 /* same SPD data */ -#define SPD_EEPROM_OFFSET 0x200 /* OFFSET of SPD in EEPROM */ -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 1 -#define CONFIG_DDR_ECC -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_VERY_BIG_RAM - -#ifndef __ASSEMBLY__ -#include <linux/stringify.h> -extern unsigned long get_board_sys_clk(unsigned long dummy); -extern unsigned long get_board_ddr_clk(unsigned long dummy); -#endif - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */ -#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk(0) /* ddrclk for MPC85xx */ - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ENABLE_36BIT_PHYS 1 - -#define CONFIG_SYS_CCSRBAR 0xef000000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR - -/* - * Diagnostics - */ -#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \ - CONFIG_SYS_POST_I2C) -/* The XPedite5370 can host an XMC which has an EEPROM at address 0x50 */ -#define I2C_ADDR_IGNORE_LIST {0x50} - -/* - * Memory map - * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable - * 0x8000_0000 0xbfff_ffff PCIe1 Mem 1G non-cacheable - * 0xc000_0000 0xcfff_ffff PCIe2 Mem 256M non-cacheable - * 0xe000_0000 0xe7ff_ffff SRAM/SSRAM/L1 Cache 128M non-cacheable - * 0xe800_0000 0xe87f_ffff PCIe1 IO 8M non-cacheable - * 0xe880_0000 0xe8ff_ffff PCIe2 IO 8M non-cacheable - * 0xee00_0000 0xee00_ffff Boot page translation 4K non-cacheable - * 0xef00_0000 0xef0f_ffff CCSR/IMMR 1M non-cacheable - * 0xef80_0000 0xef8f_ffff NAND Flash 1M non-cacheable - * 0xf000_0000 0xf7ff_ffff NOR Flash 2 128M non-cacheable - * 0xf800_0000 0xffff_ffff NOR Flash 1 128M non-cacheable - */ - -#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_8 | LCRR_EADC_3) - -/* - * NAND flash configuration - */ -#define CONFIG_SYS_NAND_BASE 0xef800000 -#define CONFIG_SYS_NAND_BASE2 0xef840000 /* Unused at this time */ -#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \ - CONFIG_SYS_NAND_BASE2} -#define CONFIG_SYS_MAX_NAND_DEVICE 2 -#define CONFIG_NAND_FSL_ELBC - -/* - * NOR flash configuration - */ -#define CONFIG_SYS_FLASH_BASE 0xf8000000 -#define CONFIG_SYS_FLASH_BASE2 0xf0000000 -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2} -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST { {0xfff40000, 0xc0000}, \ - {0xf7f40000, 0xc0000} } -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - -/* - * Chip select configuration - */ -/* NOR Flash 0 on CS0 */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - BR_PS_16 | \ - BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_128MB | \ - OR_GPCM_CSNT | \ - OR_GPCM_XACS | \ - OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_8 | \ - OR_GPCM_TRLX | \ - OR_GPCM_EHTR | \ - OR_GPCM_EAD) - -/* NOR Flash 1 on CS1 */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FLASH_BASE2 | \ - BR_PS_16 | \ - BR_V) -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM - -/* NAND flash on CS2 */ -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_NAND_BASE | \ - (2<<BR_DECC_SHIFT) | \ - BR_PS_8 | \ - BR_MS_FCM | \ - BR_V) - -/* NAND flash on CS2 */ -#define CONFIG_SYS_OR2_PRELIM (OR_AM_256KB | \ - OR_FCM_PGS | \ - OR_FCM_CSCT | \ - OR_FCM_CST | \ - OR_FCM_CHT | \ - OR_FCM_SCY_1 | \ - OR_FCM_TRLX | \ - OR_FCM_EHTR) - -/* NAND flash on CS3 */ -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_NAND_BASE2 | \ - (2<<BR_DECC_SHIFT) | \ - BR_PS_8 | \ - BR_MS_FCM | \ - BR_V) -#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM - -/* - * Use L1 as initial stack - */ -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xe0000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ - -/* - * Serial Port - */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* - * I2C - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } - -/* PEX8518 slave I2C interface */ -#define CONFIG_SYS_I2C_PEX8518_ADDR 0x70 - -/* I2C DS1631 temperature sensor */ -#define CONFIG_SYS_I2C_LM90_ADDR 0x4c - -/* I2C EEPROM - AT24C128B */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 byte pages */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* take up to 10 msec */ - -/* I2C RTC */ -#define CONFIG_RTC_M41T11 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_SYS_M41T11_BASE_YEAR 2000 - -/* GPIO */ -#define CONFIG_PCA953X -#define CONFIG_SYS_I2C_PCA953X_ADDR0 0x18 -#define CONFIG_SYS_I2C_PCA953X_ADDR1 0x1c -#define CONFIG_SYS_I2C_PCA953X_ADDR2 0x1e -#define CONFIG_SYS_I2C_PCA953X_ADDR3 0x1f -#define CONFIG_SYS_I2C_PCA953X_ADDR CONFIG_SYS_I2C_PCA953X_ADDR0 - -/* - * PU = pulled high, PD = pulled low - * I = input, O = output, IO = input/output - */ -/* PCA9557 @ 0x18*/ -#define CONFIG_SYS_PCA953X_C0_SER0_EN 0x01 /* PU; UART0 enable (1: enabled) */ -#define CONFIG_SYS_PCA953X_C0_SER0_MODE 0x02 /* PU; UART0 serial mode select */ -#define CONFIG_SYS_PCA953X_C0_SER1_EN 0x04 /* PU; UART1 enable (1: enabled) */ -#define CONFIG_SYS_PCA953X_C0_SER1_MODE 0x08 /* PU; UART1 serial mode select */ -#define CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS 0x10 /* PU; Boot flash CS select */ -#define CONFIG_SYS_PCA953X_NVM_WP 0x20 /* PU; Set to 0 to enable NVM writing */ -#define CONFIG_SYS_PCA953X_C0_VCORE_VID2 0x40 /* VID2 of ISL6262 */ -#define CONFIG_SYS_PCA953X_C0_VCORE_VID3 0x80 /* VID3 of ISL6262 */ - -/* PCA9557 @ 0x1c*/ -#define CONFIG_SYS_PCA953X_XMC0_ROOT0 0x01 /* PU; Low if XMC is RC */ -#define CONFIG_SYS_PCA953X_XMC0_MVMR0 0x02 /* XMC EEPROM write protect */ -#define CONFIG_SYS_PCA953X_XMC0_WAKE 0x04 /* PU; XMC wake */ -#define CONFIG_SYS_PCA953X_XMC0_BIST 0x08 /* PU; XMC built in self test */ -#define CONFIG_SYS_PCA953X_XMC_PRESENT 0x10 /* PU; Low if XMC module installed */ -#define CONFIG_SYS_PCA953X_PMC_PRESENT 0x20 /* PU; Low if PMC module installed */ -#define CONFIG_SYS_PCA953X_PMC0_MONARCH 0x40 /* PMC monarch mode enable */ -#define CONFIG_SYS_PCA953X_PMC0_EREADY 0x80 /* PU; PMC PCI eready */ - -/* PCA9557 @ 0x1e*/ -#define CONFIG_SYS_PCA953X_P0_GA0 0x01 /* PU; VPX Geographical address */ -#define CONFIG_SYS_PCA953X_P0_GA1 0x02 /* PU; VPX Geographical address */ -#define CONFIG_SYS_PCA953X_P0_GA2 0x04 /* PU; VPX Geographical address */ -#define CONFIG_SYS_PCA953X_P0_GA3 0x08 /* PU; VPX Geographical address */ -#define CONFIG_SYS_PCA953X_P0_GA4 0x10 /* PU; VPX Geographical address */ -#define CONFIG_SYS_PCA953X_P0_GAP 0x20 /* PU; tied to VPX P0.GAP */ -#define CONFIG_SYS_PCA953X_P1_SYSEN 0x80 /* PU; Pulled high; tied to VPX P1.SYSCON */ - -/* PCA9557 @ 0x1f */ -#define CONFIG_SYS_PCA953X_GPIO_VPX0 0x01 /* PU */ -#define CONFIG_SYS_PCA953X_GPIO_VPX1 0x02 /* PU */ -#define CONFIG_SYS_PCA953X_GPIO_VPX2 0x04 /* PU */ -#define CONFIG_SYS_PCA953X_GPIO_VPX3 0x08 /* PU */ -#define CONFIG_SYS_PCA953X_VPX_FRU_WRCTL 0x10 /* PD; I2C master source for FRU SEEPROM */ - -/* - * General PCI - * Memory space is mapped 1-1, but I/O space must start from 0. - */ -/* PCIE1 - VPX P1 */ -#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x40000000 /* 1G */ -#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE1_IO_PHYS 0xe8000000 -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ - -/* PCIE2 - PEX8518 */ -#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS -#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE2_IO_PHYS 0xe8800000 -#define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 /* 8M */ - -/* - * Networking options - */ -#define CONFIG_TSEC_TBI -#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ -#define CONFIG_ETHPRIME "eTSEC2" - -/* - * In-band SGMII auto-negotiation between TBI and BCM5482S PHY fails, force - * 1000mbps SGMII link - */ -#define CONFIG_TSEC_TBICR_SETTINGS ( \ - TBICR_PHY_RESET \ - | TBICR_FULL_DUPLEX \ - | TBICR_SPEED1_SET \ - ) - -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC1_PHY_ADDR 1 -#define TSEC1_PHYIDX 0 -#define CONFIG_HAS_ETH0 - -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_PHY_ADDR 2 -#define TSEC2_PHYIDX 0 -#define CONFIG_HAS_ETH1 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ -#define CONFIG_INTEGRITY /* support booting INTEGRITY OS */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ - -/* - * Environment Configuration - */ - -/* - * Flash memory map: - * fff80000 - ffffffff Pri U-Boot (512 KB) - * fff40000 - fff7ffff Pri U-Boot Environment (256 KB) - * fff00000 - fff3ffff Pri FDT (256KB) - * fef00000 - ffefffff Pri OS image (16MB) - * f8000000 - feefffff Pri OS Use/Filesystem (111MB) - * - * f7f80000 - f7ffffff Sec U-Boot (512 KB) - * f7f40000 - f7f7ffff Sec U-Boot Environment (256 KB) - * f7f00000 - f7f3ffff Sec FDT (256KB) - * f6f00000 - f7efffff Sec OS image (16MB) - * f0000000 - f6efffff Sec OS Use/Filesystem (111MB) - */ -#define CONFIG_UBOOT1_ENV_ADDR __stringify(0xfff80000) -#define CONFIG_UBOOT2_ENV_ADDR __stringify(0xf7f80000) -#define CONFIG_FDT1_ENV_ADDR __stringify(0xfff00000) -#define CONFIG_FDT2_ENV_ADDR __stringify(0xf7f00000) -#define CONFIG_OS1_ENV_ADDR __stringify(0xfef00000) -#define CONFIG_OS2_ENV_ADDR __stringify(0xf6f00000) - -#define CONFIG_PROG_UBOOT1 \ - "$download_cmd $loadaddr $ubootfile; " \ - "if test $? -eq 0; then " \ - "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ - "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ - "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; " \ - "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ - "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; " \ - "if test $? -ne 0; then " \ - "echo PROGRAM FAILED; " \ - "else; " \ - "echo PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_PROG_UBOOT2 \ - "$download_cmd $loadaddr $ubootfile; " \ - "if test $? -eq 0; then " \ - "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ - "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ - "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; " \ - "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ - "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; " \ - "if test $? -ne 0; then " \ - "echo PROGRAM FAILED; " \ - "else; " \ - "echo PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_BOOT_OS_NET \ - "$download_cmd $osaddr $osfile; " \ - "if test $? -eq 0; then " \ - "if test -n $fdtaddr; then " \ - "$download_cmd $fdtaddr $fdtfile; " \ - "if test $? -eq 0; then " \ - "bootm $osaddr - $fdtaddr; " \ - "else; " \ - "echo FDT DOWNLOAD FAILED; " \ - "fi; " \ - "else; " \ - "bootm $osaddr; " \ - "fi; " \ - "else; " \ - "echo OS DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_PROG_OS1 \ - "$download_cmd $osaddr $osfile; " \ - "if test $? -eq 0; then " \ - "erase "CONFIG_OS1_ENV_ADDR" +$filesize; " \ - "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \ - "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \ - "if test $? -ne 0; then " \ - "echo OS PROGRAM FAILED; " \ - "else; " \ - "echo OS PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo OS DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_PROG_OS2 \ - "$download_cmd $osaddr $osfile; " \ - "if test $? -eq 0; then " \ - "erase "CONFIG_OS2_ENV_ADDR" +$filesize; " \ - "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \ - "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \ - "if test $? -ne 0; then " \ - "echo OS PROGRAM FAILED; " \ - "else; " \ - "echo OS PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo OS DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_PROG_FDT1 \ - "$download_cmd $fdtaddr $fdtfile; " \ - "if test $? -eq 0; then " \ - "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;" \ - "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \ - "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \ - "if test $? -ne 0; then " \ - "echo FDT PROGRAM FAILED; " \ - "else; " \ - "echo FDT PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo FDT DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_PROG_FDT2 \ - "$download_cmd $fdtaddr $fdtfile; " \ - "if test $? -eq 0; then " \ - "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;" \ - "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \ - "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \ - "if test $? -ne 0; then " \ - "echo FDT PROGRAM FAILED; " \ - "else; " \ - "echo FDT PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo FDT DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "autoload=yes\0" \ - "download_cmd=tftp\0" \ - "console_args=console=ttyS0,115200\0" \ - "root_args=root=/dev/nfs rw\0" \ - "misc_args=ip=on\0" \ - "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \ - "bootfile=/home/user/file\0" \ - "osfile=/home/user/board.uImage\0" \ - "fdtfile=/home/user/board.dtb\0" \ - "ubootfile=/home/user/u-boot.bin\0" \ - "fdtaddr=0x1e00000\0" \ - "osaddr=0x1000000\0" \ - "loadaddr=0x1000000\0" \ - "prog_uboot1="CONFIG_PROG_UBOOT1"\0" \ - "prog_uboot2="CONFIG_PROG_UBOOT2"\0" \ - "prog_os1="CONFIG_PROG_OS1"\0" \ - "prog_os2="CONFIG_PROG_OS2"\0" \ - "prog_fdt1="CONFIG_PROG_FDT1"\0" \ - "prog_fdt2="CONFIG_PROG_FDT2"\0" \ - "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0" \ - "bootcmd_flash1=run set_bootargs; " \ - "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\ - "bootcmd_flash2=run set_bootargs; " \ - "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\ - "bootcmd=run bootcmd_flash1\0" -#endif /* __CONFIG_H */ diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h deleted file mode 100644 index b9c9ac4ba8df..000000000000 --- a/include/configs/xpedite550x.h +++ /dev/null @@ -1,494 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2010 Extreme Engineering Solutions, Inc. - * Copyright 2007-2008 Freescale Semiconductor, Inc. - */ - -/* - * xpedite550x board configuration file - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_SYS_BOARD_NAME "XPedite5500" -#define CONFIG_SYS_FORM_PMC_XMC 1 -#define CONFIG_PRPMC_PCI_ALIAS "pci0" /* Processor PMC interface on pci0 */ - -#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ -#define CONFIG_PCIE1 1 /* PCIE controller 1 (PEX8112 or XMC) */ -#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ -#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ - -/* - * Multicore config - */ -#define CONFIG_BPTR_VIRT_ADDR 0xee000000 /* virt boot page address */ -#define CONFIG_MPC8xxx_DISABLE_BPTR /* Don't leave BPTR enabled */ - -/* - * DDR config - */ -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ -#define CONFIG_DDR_SPD -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#define SPD_EEPROM_ADDRESS 0x54 -#define SPD_EEPROM_OFFSET 0x200 /* OFFSET of SPD in EEPROM */ -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 -#define CONFIG_DDR_ECC -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_VERY_BIG_RAM - -#ifndef __ASSEMBLY__ -#include <linux/stringify.h> -extern unsigned long get_board_sys_clk(unsigned long dummy); -extern unsigned long get_board_ddr_clk(unsigned long dummy); -#endif - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */ -#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk(0) /* ddrclk for MPC85xx */ - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_ENABLE_36BIT_PHYS 1 - -#define CONFIG_SYS_CCSRBAR 0xef000000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR - -/* - * Diagnostics - */ -#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \ - CONFIG_SYS_POST_I2C) -#define I2C_ADDR_LIST {CONFIG_SYS_I2C_EEPROM_ADDR, \ - CONFIG_SYS_I2C_LM75_ADDR, \ - CONFIG_SYS_I2C_LM90_ADDR, \ - CONFIG_SYS_I2C_PCA953X_ADDR0, \ - CONFIG_SYS_I2C_PCA953X_ADDR2, \ - CONFIG_SYS_I2C_PCA953X_ADDR3, \ - CONFIG_SYS_I2C_RTC_ADDR} - -/* - * Memory map - * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable - * 0x8000_0000 0xbfff_ffff PCIe1 Mem 1G non-cacheable - * 0xe000_0000 0xe7ff_ffff SRAM/SSRAM/L1 Cache 128M non-cacheable - * 0xe800_0000 0xe87f_ffff PCIe1 IO 8M non-cacheable - * 0xee00_0000 0xee00_ffff Boot page translation 4K non-cacheable - * 0xef00_0000 0xef0f_ffff CCSR/IMMR 1M non-cacheable - * 0xef80_0000 0xef8f_ffff NAND Flash 1M non-cacheable - * 0xf000_0000 0xf7ff_ffff NOR Flash 2 128M non-cacheable - * 0xf800_0000 0xffff_ffff NOR Flash 1 128M non-cacheable - */ - -#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_8 | LCRR_EADC_3) - -/* - * NAND flash configuration - */ -#define CONFIG_SYS_NAND_BASE 0xef800000 -#define CONFIG_SYS_NAND_BASE2 0xef840000 /* Unused at this time */ -#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \ - CONFIG_SYS_NAND_BASE2} -#define CONFIG_SYS_MAX_NAND_DEVICE 2 -#define CONFIG_NAND_FSL_ELBC - -/* - * NOR flash configuration - */ -#define CONFIG_SYS_FLASH_BASE 0xf8000000 -#define CONFIG_SYS_FLASH_BASE2 0xf0000000 -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2} -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST { {0xfff40000, 0xc0000}, \ - {0xf7f40000, 0xc0000} } -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - -/* - * Chip select configuration - */ -/* NOR Flash 0 on CS0 */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - BR_PS_16 | \ - BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_128MB | \ - OR_GPCM_CSNT | \ - OR_GPCM_XACS | \ - OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_8 | \ - OR_GPCM_TRLX | \ - OR_GPCM_EHTR | \ - OR_GPCM_EAD) - -/* NOR Flash 1 on CS1 */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FLASH_BASE2 | \ - BR_PS_16 | \ - BR_V) -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM - -/* NAND flash on CS2 */ -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_NAND_BASE | \ - (2<<BR_DECC_SHIFT) | \ - BR_PS_8 | \ - BR_MS_FCM | \ - BR_V) - -/* NAND flash on CS2 */ -#define CONFIG_SYS_OR2_PRELIM (OR_AM_256KB | \ - OR_FCM_PGS | \ - OR_FCM_CSCT | \ - OR_FCM_CST | \ - OR_FCM_CHT | \ - OR_FCM_SCY_1 | \ - OR_FCM_TRLX | \ - OR_FCM_EHTR) - -/* NAND flash on CS3 */ -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_NAND_BASE2 | \ - (2<<BR_DECC_SHIFT) | \ - BR_PS_8 | \ - BR_MS_FCM | \ - BR_V) -#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM - -/* - * Use L1 as initial stack - */ -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xe0000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ - -/* - * Serial Port - */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - - -/* - * I2C - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 - -/* I2C DS7505 temperature sensor */ -#define CONFIG_SYS_I2C_LM75_ADDR 0x48 - -/* I2C ADT7461 temperature sensor */ -#define CONFIG_SYS_I2C_LM90_ADDR 0x4C - -/* I2C EEPROM - AT24C128B */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 byte pages */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* take up to 10 msec */ - -/* I2C RTC */ -#define CONFIG_RTC_M41T11 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_SYS_M41T11_BASE_YEAR 2000 - -/* GPIO */ -#define CONFIG_PCA953X -#define CONFIG_SYS_I2C_PCA953X_ADDR0 0x18 -#define CONFIG_SYS_I2C_PCA953X_ADDR1 0x1c -#define CONFIG_SYS_I2C_PCA953X_ADDR2 0x1e -#define CONFIG_SYS_I2C_PCA953X_ADDR3 0x1f -#define CONFIG_SYS_I2C_PCA953X_ADDR CONFIG_SYS_I2C_PCA953X_ADDR0 - -/* - * GPIO pin definitions, PU = pulled high, PD = pulled low - */ -/* PCA9557 @ 0x18*/ -#define CONFIG_SYS_PCA953X_C0_SER0_EN 0x01 /* PU; UART0 enable (1: enabled) */ -#define CONFIG_SYS_PCA953X_C0_SER0_MODE 0x02 /* PU; UART0 serial mode select (1: RS-485, 0: RS-232) */ -#define CONFIG_SYS_PCA953X_C0_SER1_EN 0x04 /* PU; UART1 enable (1: enabled) */ -#define CONFIG_SYS_PCA953X_C0_SER1_MODE 0x08 /* PU; UART1 serial mode select (1: RS-485, 0: RS-232) */ -#define CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS 0x10 /* PU; Boot flash CS select */ -#define CONFIG_SYS_PCA953X_NVM_WP 0x20 /* PU; Write protection (0: disabled, 1: enabled) */ - -/* PCA9557 @ 0x1e*/ -#define CONFIG_SYS_PCA953X_XMC_GA0 0x01 /* PU; */ -#define CONFIG_SYS_PCA953X_XMC_GA1 0x02 /* PU; */ -#define CONFIG_SYS_PCA953X_XMC_GA2 0x04 /* PU; */ -#define CONFIG_SYS_PCA953X_XMC_WAKE 0x10 /* PU; */ -#define CONFIG_SYS_PCA953X_XMC_BIST 0x20 /* Enable XMC BIST */ -#define CONFIG_SYS_PCA953X_PMC_EREADY 0x40 /* PU; PMC PCI eready */ -#define CONFIG_SYS_PCA953X_PMC_MONARCH 0x80 /* PMC monarch mode enable */ - -/* PCA9557 @ 0x1f */ -#define CONFIG_SYS_PCA953X_MC_GPIO0 0x01 /* PU; */ -#define CONFIG_SYS_PCA953X_MC_GPIO1 0x02 /* PU; */ -#define CONFIG_SYS_PCA953X_MC_GPIO2 0x04 /* PU; */ -#define CONFIG_SYS_PCA953X_MC_GPIO3 0x08 /* PU; */ -#define CONFIG_SYS_PCA953X_MC_GPIO4 0x10 /* PU; */ -#define CONFIG_SYS_PCA953X_MC_GPIO5 0x20 /* PU; */ -#define CONFIG_SYS_PCA953X_MC_GPIO6 0x40 /* PU; */ -#define CONFIG_SYS_PCA953X_MC_GPIO7 0x80 /* PU; */ - -/* - * General PCI - * Memory space is mapped 1-1, but I/O space must start from 0. - */ - -/* controller 1 - PEX8112 or XMC, depending on build option */ -#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x40000000 /* 1G */ -#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE1_IO_PHYS 0xe8000000 -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ - -/* - * Networking options - */ -#define CONFIG_TSEC_TBI -#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ -#define CONFIG_ETHPRIME "eTSEC2" - -/* - * In-band SGMII auto-negotiation between TBI and BCM5482S PHY fails, force - * 1000mbps SGMII link - */ -#define CONFIG_TSEC_TBICR_SETTINGS ( \ - TBICR_PHY_RESET \ - | TBICR_FULL_DUPLEX \ - | TBICR_SPEED1_SET \ - ) - -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC1_PHY_ADDR 1 -#define TSEC1_PHYIDX 0 -#define CONFIG_HAS_ETH0 - -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_PHY_ADDR 2 -#define TSEC2_PHYIDX 0 -#define CONFIG_HAS_ETH1 - -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "eTSEC3" -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC3_PHY_ADDR 3 -#define TSEC3_PHYIDX 0 -#define CONFIG_HAS_ETH2 - -/* - * USB - */ -#define CONFIG_USB_EHCI_FSL -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ -#define CONFIG_INTEGRITY /* support booting INTEGRITY OS */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ - -/* - * Environment Configuration - */ - -/* - * Flash memory map: - * fff80000 - ffffffff Pri U-Boot (512 KB) - * fff40000 - fff7ffff Pri U-Boot Environment (256 KB) - * fff00000 - fff3ffff Pri FDT (256KB) - * fef00000 - ffefffff Pri OS image (16MB) - * f8000000 - feefffff Pri OS Use/Filesystem (111MB) - * - * f7f80000 - f7ffffff Sec U-Boot (512 KB) - * f7f40000 - f7f7ffff Sec U-Boot Environment (256 KB) - * f7f00000 - f7f3ffff Sec FDT (256KB) - * f6f00000 - f7efffff Sec OS image (16MB) - * f0000000 - f6efffff Sec OS Use/Filesystem (111MB) - */ -#define CONFIG_UBOOT1_ENV_ADDR __stringify(0xfff80000) -#define CONFIG_UBOOT2_ENV_ADDR __stringify(0xf7f80000) -#define CONFIG_FDT1_ENV_ADDR __stringify(0xfff00000) -#define CONFIG_FDT2_ENV_ADDR __stringify(0xf7f00000) -#define CONFIG_OS1_ENV_ADDR __stringify(0xfef00000) -#define CONFIG_OS2_ENV_ADDR __stringify(0xf6f00000) - -#define CONFIG_PROG_UBOOT1 \ - "$download_cmd $loadaddr $ubootfile; " \ - "if test $? -eq 0; then " \ - "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ - "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ - "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; " \ - "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ - "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; " \ - "if test $? -ne 0; then " \ - "echo PROGRAM FAILED; " \ - "else; " \ - "echo PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_PROG_UBOOT2 \ - "$download_cmd $loadaddr $ubootfile; " \ - "if test $? -eq 0; then " \ - "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ - "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ - "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; " \ - "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ - "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; " \ - "if test $? -ne 0; then " \ - "echo PROGRAM FAILED; " \ - "else; " \ - "echo PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_BOOT_OS_NET \ - "$download_cmd $osaddr $osfile; " \ - "if test $? -eq 0; then " \ - "if test -n $fdtaddr; then " \ - "$download_cmd $fdtaddr $fdtfile; " \ - "if test $? -eq 0; then " \ - "bootm $osaddr - $fdtaddr; " \ - "else; " \ - "echo FDT DOWNLOAD FAILED; " \ - "fi; " \ - "else; " \ - "bootm $osaddr; " \ - "fi; " \ - "else; " \ - "echo OS DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_PROG_OS1 \ - "$download_cmd $osaddr $osfile; " \ - "if test $? -eq 0; then " \ - "erase "CONFIG_OS1_ENV_ADDR" +$filesize; " \ - "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \ - "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \ - "if test $? -ne 0; then " \ - "echo OS PROGRAM FAILED; " \ - "else; " \ - "echo OS PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo OS DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_PROG_OS2 \ - "$download_cmd $osaddr $osfile; " \ - "if test $? -eq 0; then " \ - "erase "CONFIG_OS2_ENV_ADDR" +$filesize; " \ - "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \ - "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \ - "if test $? -ne 0; then " \ - "echo OS PROGRAM FAILED; " \ - "else; " \ - "echo OS PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo OS DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_PROG_FDT1 \ - "$download_cmd $fdtaddr $fdtfile; " \ - "if test $? -eq 0; then " \ - "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;" \ - "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \ - "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \ - "if test $? -ne 0; then " \ - "echo FDT PROGRAM FAILED; " \ - "else; " \ - "echo FDT PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo FDT DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_PROG_FDT2 \ - "$download_cmd $fdtaddr $fdtfile; " \ - "if test $? -eq 0; then " \ - "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;" \ - "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \ - "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \ - "if test $? -ne 0; then " \ - "echo FDT PROGRAM FAILED; " \ - "else; " \ - "echo FDT PROGRAM SUCCEEDED; " \ - "fi; " \ - "else; " \ - "echo FDT DOWNLOAD FAILED; " \ - "fi;" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "autoload=yes\0" \ - "download_cmd=tftp\0" \ - "console_args=console=ttyS0,115200\0" \ - "root_args=root=/dev/nfs rw\0" \ - "misc_args=ip=on\0" \ - "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \ - "bootfile=/home/user/file\0" \ - "osfile=/home/user/board.uImage\0" \ - "fdtfile=/home/user/board.dtb\0" \ - "ubootfile=/home/user/u-boot.bin\0" \ - "fdtaddr=0x1e00000\0" \ - "osaddr=0x1000000\0" \ - "loadaddr=0x1000000\0" \ - "prog_uboot1="CONFIG_PROG_UBOOT1"\0" \ - "prog_uboot2="CONFIG_PROG_UBOOT2"\0" \ - "prog_os1="CONFIG_PROG_OS1"\0" \ - "prog_os2="CONFIG_PROG_OS2"\0" \ - "prog_fdt1="CONFIG_PROG_FDT1"\0" \ - "prog_fdt2="CONFIG_PROG_FDT2"\0" \ - "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0" \ - "bootcmd_flash1=run set_bootargs; " \ - "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\ - "bootcmd_flash2=run set_bootargs; " \ - "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\ - "bootcmd=run bootcmd_flash1\0" -#endif /* __CONFIG_H */