Hi Marek,
On Mon, Feb 1, 2021 at 8:28 AM Marek Vasut marex@denx.de wrote:
Did you test that yourself? I am CCing Christoph, as I don't have the
Yes, I tested it myself:
U-Boot SPL 2021.01 (Jan 23 2021 - 14:34:35 -0300) Trying to boot from MMC1
U-Boot 2021.01 (Jan 23 2021 - 14:34:35 -0300)
CPU: Freescale i.MX6Q rev1.2 996 MHz (running at 792 MHz) CPU: Automotive temperature grade (-40C to 125C) at 43C Reset cause: POR Model: Freescale i.MX6 Quad SABRE Smart Device Board I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 3 Loading Environment from MMC... OK No panel detected: default to Hannstar-XGA Display: Hannstar-XGA (1024x768) In: serial Out: serial Err: serial Net: eth0: ethernet@2188000 Hit any key to stop autoboot: 0
board. The report I am getting is that it does not boot fine on his end when writing u-boot-with-spl.imx to SD card at offset 1024B.
I have flashed the SD card by writing SPL at offset 1kB and u-boot-dtb.img at 69kB.