From: Neha Malcom Francis n-francis@ti.com
Add CONFIG_K3_INLINE_ECC so that ECC functions can be compiled into R5 SPL only when the config has been enabled.
Signed-off-by: Neha Malcom Francis n-francis@ti.com --- drivers/ram/Kconfig | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig index f7e357f24da7..533d0c629a64 100644 --- a/drivers/ram/Kconfig +++ b/drivers/ram/Kconfig @@ -116,6 +116,16 @@ config IMXRT_SDRAM to support external memories like sdram, psram & nand. This driver is for the sdram memory interface with the SEMC.
+config K3_INLINE_ECC + bool "Enable TI Inline ECC support" + depends on K3_DDRSS + help + Enable Inline ECC support on K3 platforms. 1/9th of the SDRAM space + is used for ECC storage and the rest 8/9th is available for system + use. Enabling ECC increases boot time as the ECC protected regions + need to be primed with a predefined value prior to enabling ECC + check. + source "drivers/ram/aspeed/Kconfig" source "drivers/ram/cadence/Kconfig" source "drivers/ram/octeon/Kconfig"