From: Igor Opaniuk igor.opaniuk@toradex.com
1. Use distro_bootcmd as default boot command instead of legacy emmcboot wrapper. 2. Drop emmcboot and sdboot wrappers. 3. Provide proper boot order for Distro Boot.
Signed-off-by: Igor Opaniuk igor.opaniuk@toradex.com ---
configs/apalis-tk1_defconfig | 2 +- include/configs/apalis-tk1.h | 51 ++++++++++++-------------------------------- 2 files changed, 15 insertions(+), 38 deletions(-)
diff --git a/configs/apalis-tk1_defconfig b/configs/apalis-tk1_defconfig index 868303a..db66d68 100644 --- a/configs/apalis-tk1_defconfig +++ b/configs/apalis-tk1_defconfig @@ -11,7 +11,7 @@ CONFIG_SPL_TEXT_BASE=0x80108000 CONFIG_FIT=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOOTDELAY=1 -CONFIG_BOOTCOMMAND="run emmcboot; setenv fdtfile ${soc}-${fdt-module}-${fdt_board}.dtb && run distro_bootcmd" +CONFIG_BOOTCOMMAND="setenv fdtfile ${soc}-${fdt-module}-${fdt_board}.dtb && run distro_bootcmd" CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_VERSION_VARIABLE=y diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h index 965259c..6f73606 100644 --- a/include/configs/apalis-tk1.h +++ b/include/configs/apalis-tk1.h @@ -34,6 +34,20 @@ /* General networking support */ #define CONFIG_TFTP_TSIZE
+/* + * Custom Distro Boot configuration: + * 1. 8bit SD port (MMC1) + * 2. 4bit SD port (MMC2) + * 3. eMMC (MMC0) + */ +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 1) \ + func(MMC, mmc, 2) \ + func(MMC, mmc, 0) \ + func(USB, usb, 0) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) + #undef CONFIG_IPADDR #define CONFIG_IPADDR 192.168.10.2 #define CONFIG_NETMASK 255.255.255.0 @@ -54,24 +68,6 @@ "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \ "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
-#define EMMC_BOOTCMD \ - "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \ - "ro rootfstype=ext4 rootwait\0" \ - "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \ - "setenv bootargs ${defargs} ${emmcargs} " \ - "${setupargs} ${vidargs}; echo Booting from internal eMMC; " \ - "run emmcdtbload; " \ - "load mmc ${emmcdev}:${emmcbootpart} ${kernel_addr_r} " \ - "${boot_file} && run fdt_fixup && " \ - "bootz ${kernel_addr_r} - ${dtbparam}\0" \ - "emmcbootpart=1\0" \ - "emmcdev=0\0" \ - "emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \ - "${fdt_addr_r} ${soc}-${fdt_module}-${fdt_board}.dtb && " \ - "setenv dtbparam ${fdt_addr_r}\0" \ - "emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \ - "emmcrootpart=2\0" - #define NFS_BOOTCMD \ "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \ "nfsboot=pci enum; run setup; setenv bootargs ${defargs} ${nfsargs} " \ @@ -82,23 +78,6 @@ "${soc}-${fdt_module}-${fdt_board}.dtb " \ "&& setenv dtbparam ${fdt_addr_r}\0"
-#define SD_BOOTCMD \ - "set_sdargs=setenv sdargs ip=off root=PARTUUID=${uuid} ro " \ - "rootfstype=ext4 rootwait\0" \ - "sdboot=run setup; run sdfinduuid; run set_sdargs; " \ - "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \ - "${vidargs}; echo Booting from SD card in 8bit slot...; " \ - "run sddtbload; load mmc ${sddev}:${sdbootpart} " \ - "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \ - "bootz ${kernel_addr_r} - ${dtbparam}\0" \ - "sdbootpart=1\0" \ - "sddev=1\0" \ - "sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \ - "${fdt_addr_r} ${soc}-${fdt_module}-${fdt_board}.dtb " \ - "&& setenv dtbparam ${fdt_addr_r}\0" \ - "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \ - "sdrootpart=2\0" - #define BOARD_EXTRA_ENV_SETTINGS \ "boot_file=zImage\0" \ "console=ttyS0\0" \ @@ -106,12 +85,10 @@ "usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0 " \ "user_debug=30 pcie_aspm=off\0" \ "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \ - EMMC_BOOTCMD \ "fdt_board=eval\0" \ "fdt_fixup=;\0" \ "fdt_module=" FDT_MODULE "\0" \ NFS_BOOTCMD \ - SD_BOOTCMD \ UBOOT_UPDATE \ "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ "00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \