From: Marek Behún marek.behun@nic.cz
The bcmgenet and sun8i_emac drivers call phy_connect(), which finds / creates the PHY and also connects it to the eth device via phy_connect_dev(), then set some phydev members (bcmgenet only), and then call phy_connect_dev() explicitly again.
Drop the second phy_connect_dev(), since it is unnecesary.
Signed-off-by: Marek Behún marek.behun@nic.cz --- drivers/net/bcmgenet.c | 2 -- drivers/net/sun8i_emac.c | 2 -- 2 files changed, 4 deletions(-)
diff --git a/drivers/net/bcmgenet.c b/drivers/net/bcmgenet.c index ef321f2839..4e1f8ed7a4 100644 --- a/drivers/net/bcmgenet.c +++ b/drivers/net/bcmgenet.c @@ -526,8 +526,6 @@ static int bcmgenet_phy_init(struct bcmgenet_eth_priv *priv, void *dev) } phydev->advertising = phydev->supported;
- phy_connect_dev(phydev, dev); - priv->phydev = phydev; phy_config(priv->phydev);
diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c index 5943a5e3f0..906a8ec5d0 100644 --- a/drivers/net/sun8i_emac.c +++ b/drivers/net/sun8i_emac.c @@ -391,8 +391,6 @@ static int sun8i_phy_init(struct emac_eth_dev *priv, void *dev) if (!phydev) return -ENODEV;
- phy_connect_dev(phydev, dev); - priv->phydev = phydev; phy_config(priv->phydev);