From: Peng Fan peng.fan@nxp.com
binman symbol is a good feature, but only used on X86 for now. This patchset is to use it for i.MX8M platform.
The current imx8m ddr phy firmware consumes lots of space, because we pad them to the largest 32KB and 16KB for IMEM and DMEM.
With this patchset we use binman symbols to get firmware location and size, we could save near 36KB with i.MX8MP-EVK.
Please help check and test
Note: with this patchset, nxp downstream imx-mkimage will not work. Later patches will follow up to address.
Peng Fan (7): spl: guard u_boot_any with X86 arm: dts: imx8m: update binman ddr firmware node name armv8: u-boot-spl.lds: mark __image_copy_start as symbol binman_sym: update symbol alignment to 8 bytes tools: binman: section: replace @ with - ddr: imx8m: helper: load ddr firmware according to binman symbols arm: dts: imx8m: shrink ddr firmware size to actual file size
arch/arm/cpu/armv8/u-boot-spl.lds | 2 +- arch/arm/dts/imx8mm-u-boot.dtsi | 16 +++---- arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi | 8 ++-- .../dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi | 4 +- arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 8 ++-- arch/arm/dts/imx8mn-evk-u-boot.dtsi | 8 ++-- .../dts/imx8mn-var-som-symphony-u-boot.dtsi | 8 ++-- arch/arm/dts/imx8mn-venice-u-boot.dtsi | 16 +++---- arch/arm/dts/imx8mp-u-boot.dtsi | 8 ++-- arch/arm/dts/imx8mq-cm-u-boot.dtsi | 8 ++-- arch/arm/dts/imx8mq-u-boot.dtsi | 16 +++---- common/spl/spl.c | 8 +++- drivers/ddr/imx/imx8m/helper.c | 45 ++++++++++++++++--- include/binman_sym.h | 6 +-- tools/binman/etype/section.py | 2 +- 15 files changed, 101 insertions(+), 62 deletions(-)