Some boards, specifically 64-bit Allwinner boards (sun50i), are extremely limited on SPL size. One strategy that was used to make space was to remove the FIT "os" property parsing code, because it uses a rather large lookup table.
However, this forces the legacy FIT parsing code path, which requires the "firmware" entry in the FIT to reference the U-Boot binary, even if U-Boot is not the next binary in the boot sequence (for example, on sun50i boards, ATF is run first).
This prevents the same FIT image from being used with a SPL with CONFIG_SPL_FIT_IMAGE_TINY=n and CONFIG_SPL_ATF=y, because the boot method selection code looks at `spl_image.os`, which is only set from the "firmware" entry's "os" property.
To be able to use CONFIG_SPL_ATF=y, the "firmware" entry in the FIT must be ATF, and U-Boot must be a loadable. For this to work, we need to parse the "os" property just enough to tell U-Boot from other images, so we can find it in the loadables list to append the FDT, and so we don't try to append the FDT to ATF (which could clobber adjacent firmware).
So add the minimal code necessary to distinguish U-Boot/non-U-Boot loadables with CONFIG_SPL_FIT_IMAGE_TINY=y. This adds about 300 bytes, much less than the 7400 bytes added by CONFIG_SPL_FIT_IMAGE_TINY=n.
Acked-by: Patrick Wildt patrick@blueri.se Signed-off-by: Samuel Holland samuel@sholland.org --- common/spl/Kconfig | 4 +--- common/spl/spl_fit.c | 17 ++++++++++++++++- 2 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig index af8255a8d6a..041b47244bd 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -465,9 +465,7 @@ config SPL_FIT_IMAGE_TINY Enable this to reduce the size of the FIT image loading code in SPL, if space for the SPL binary is very tight.
- This removes the detection of image types (which forces the - first image to be treated as having a U-Boot style calling - convention) and skips the recording of each loaded payload + This skips the recording of each loaded payload (i.e. loadable) into the FDT (modifying the loaded FDT to ensure this information is available to the next image invoked). diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c index 365104fe028..a31ab6c5992 100644 --- a/common/spl/spl_fit.c +++ b/common/spl/spl_fit.c @@ -466,7 +466,22 @@ static int spl_fit_record_loadable(const void *fit, int images, int index, static int spl_fit_image_get_os(const void *fit, int noffset, uint8_t *os) { #if CONFIG_IS_ENABLED(FIT_IMAGE_TINY) && !defined(CONFIG_SPL_OS_BOOT) - return -ENOTSUPP; + const char *name = fdt_getprop(fit, noffset, FIT_OS_PROP, NULL); + + if (!name) + return -ENOENT; + + /* + * We don't care what the type of the image actually is, + * only whether or not it is U-Boot. This saves some + * space by omitting the large table of OS types. + */ + if (!strcmp(name, "u-boot")) + *os = IH_OS_U_BOOT; + else + *os = IH_OS_INVALID; + + return 0; #else return fit_image_get_os(fit, noffset, os); #endif