Re: [U-Boot] [PATCH v3 2/2] arm: i.MX: Add CMD_NANDBCB Kconfig entry

Add Kconfig entry for CMD_NANDBCB, and default y on i.MX6 platform with NAND_MXS defined.

Signed-off-by: Jagan Teki jagan@amarulasolutions.com

Changes for v3:

• Fixed Typo 'seprate'

Changes for v2:

• New patch

arch/arm/mach-imx/Kconfig | 11 +++++++++++ 1 file changed, 11 insertions(+)

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 3aec89d..1b9c275 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -71,6 +71,17 @@ config CMD_HDMIDETECT This enables the 'hdmidet' command which detects if an HDMI monitor is connected.

+config CMD_NANDBCB

•   bool "i.MX6 NAND Boot Control Block(BCB) command"
  

•   depends on NAND && CMD_MTDPARTS
  

•   default y if ARCH_MX6 && NAND_MXS
  

•   help
  

•     Unlike normal 'nand write/erase' commands, this command update
  

•     Boot Control Block(BCB) for i.MX6 platform NAND IP's.
  

•     This is similar to kobs-ng, which is used in Linux as separate
  

•     rootfs package.
  

config NXP_BOARD_REVISION bool "Read NXP board revision from fuses" depends on ARCH_MX6 || ARCH_MX7

Tested By : Shyam Saini shyam@amarulasolutions.com