When functions return an error it propagates up the stack to the point where it is reported. Often the error code provides enough information about the root cause of the error that this is obvious what went wrong.
However in some cases the error may be hard to trace. For example if a driver uses several devices to perform an operation, it may not be obvious which one failed.
Add a log_ret() macro to help with this. This can be used to wrap any error-return value. The logging system will then output a log record when the original error is generated, making it easy to trace the call stack of the error.
This macro can significantly impact code size, so its use is controlled by a Kconfig option, which is enabled for sandbox.
Signed-off-by: Simon Glass sjg@chromium.org ---
common/Kconfig | 13 +++++++++++++ configs/sandbox_defconfig | 1 + doc/README.log | 8 ++++++++ include/log.h | 11 +++++++++++ 4 files changed, 33 insertions(+)
diff --git a/common/Kconfig b/common/Kconfig index 4da095a4fd..c9833b3226 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -504,6 +504,19 @@ config LOG_TEST in various different ways to test that the logging system works correctly with varoius settings.
+config LOG_ERROR_RETURN + bool "Log all functions which return an error" + depends on LOG + help + When an error is returned in U-Boot it is sometimes difficult to + figure out the root cause. For eaxmple, reading from SPI flash may + fail due to a problem in the SPI controller or due to the flash part + not returning the expected information. This option changes + log_ret() to log any errors it sees. With this option disabled, + log_ret() is a nop. + + You can add log_ret() to all functions which return an error code. + endmenu
config DEFAULT_FDT_FILE diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index 7efb4ebf11..41a2e34235 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -18,6 +18,7 @@ CONFIG_PRE_CONSOLE_BUFFER=y CONFIG_PRE_CON_BUF_ADDR=0x100000 CONFIG_LOG=y CONFIG_LOG_MAX_LEVEL=6 +CONFIG_LOG_ERROR_RETURN=y CONFIG_CMD_CPU=y CONFIG_CMD_LICENSE=y CONFIG_CMD_BOOTZ=y diff --git a/doc/README.log b/doc/README.log index 54d9a8e1b9..2abaee0c10 100644 --- a/doc/README.log +++ b/doc/README.log @@ -148,6 +148,14 @@ Also debug() and error() will generate log records - these use LOG_CATEGORY as the category, so you should #define this right at the top of the source file to ensure the category is correct.
+You can also define CONFIG_LOG_ERROR_RETURN to enable the log_ret() macro. This +can be used whenever your function returns an error value: + + return log_ret(uclass_first_device(UCLASS_MMC, &dev)); + +This will write a log record when an error code is detected (a value < 0). This +can make it easier to trace errors that are generated deep in the call stack. +
Code size --------- diff --git a/include/log.h b/include/log.h index 828919a409..68368d5cf1 100644 --- a/include/log.h +++ b/include/log.h @@ -159,6 +159,17 @@ void __assert_fail(const char *assertion, const char *file, unsigned int line, ({ if (!(x) && _DEBUG) \ __assert_fail(#x, __FILE__, __LINE__, __func__); })
+#ifdef CONFIG_LOG_ERROR_RETURN +#define log_ret(_ret) ({ \ + int __ret = (_ret); \ + if (__ret < 0) \ + log(LOG_CATEGORY, LOGL_ERR, "returning err=%d\n", __ret); \ + __ret; \ + }) +#else +#define log_ret(_ret) (_ret) +#endif + /** * struct log_rec - a single log record *