On 3/15/22 08:54, Patrice CHOTARD wrote:
Hi Patrick
On 2/23/22 10:05, Patrice CHOTARD wrote:
Hi Patrick
On 1/31/22 16:07, Patrick Delaunay wrote:
Device tree alignment with Linux kernel v5.17-rc1
- ARM: dts: stm32: add pull-up to USART3 and UART7 RX pins on STM32MP15 DKx boards
- ARM: dts: stm32: clean uart4_idle_pins_a node for stm32mp15
- ARM: dts: stm32: tune the HS USB PHYs on stm32mp15xx-dkx
- ARM: dts: stm32: tune the HS USB PHYs on stm32mp157c-ev1
- ARM: dts: stm32: fix stusb1600 pinctrl used on stm32mp157c-dk
Signed-off-by: Patrick Delaunay patrick.delaunay@foss.st.com
arch/arm/dts/stm32mp15-pinctrl.dtsi | 32 ++++++++++++++--------------- arch/arm/dts/stm32mp157c-ev1.dts | 22 ++++++++++++++++++++ arch/arm/dts/stm32mp15xx-dkx.dtsi | 16 +++++++++++++++ 3 files changed, 54 insertions(+), 16 deletions(-)
diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi index d3553e0f01..6161f5906e 100644 --- a/arch/arm/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi @@ -1718,7 +1718,7 @@
stusb1600_pins_a: stusb1600-0 { pins {
pinmux = <STM32_PINMUX('I', 11, ANALOG)>;
pinmux = <STM32_PINMUX('I', 11, GPIO)>; bias-pull-up;@@ -1737,20 +1737,20 @@ };
uart4_idle_pins_a: uart4-idle-0 {
pins1 {pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */};pins2 {pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */bias-disable;};
pins1 {pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */};pins2 {pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */bias-disable;};};
uart4_sleep_pins_a: uart4-sleep-0 {
pins {
pins { pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */ <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
};
};};
uart4_pins_b: uart4-1 {
@@ -1816,7 +1816,7 @@ }; pins2 { pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
bias-disable;
bias-pull-up;@@ -1826,7 +1826,7 @@ }; pins2 { pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
bias-disable;
bias-pull-up;@@ -1971,7 +1971,7 @@ pins2 { pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */ <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
bias-disable;
bias-pull-up;@@ -1988,7 +1988,7 @@ }; pins3 { pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
bias-disable;
bias-pull-up;@@ -2012,7 +2012,7 @@ pins2 { pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */ <STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
bias-disable;
bias-pull-up;@@ -2029,7 +2029,7 @@ }; pins3 { pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
bias-disable;
bias-pull-up;diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts index 5c5b1ddf7b..e222d2d2cb 100644 --- a/arch/arm/dts/stm32mp157c-ev1.dts +++ b/arch/arm/dts/stm32mp157c-ev1.dts @@ -375,3 +375,25 @@ &usbphyc { status = "okay"; };
+&usbphyc_port0 {
- st,tune-hs-dc-level = <2>;
- st,enable-fs-rftime-tuning;
- st,enable-hs-rftime-reduction;
- st,trim-hs-current = <15>;
- st,trim-hs-impedance = <1>;
- st,tune-squelch-level = <3>;
- st,tune-hs-rx-offset = <2>;
- st,no-lsfs-sc;
+};
+&usbphyc_port1 {
- st,tune-hs-dc-level = <2>;
- st,enable-fs-rftime-tuning;
- st,enable-hs-rftime-reduction;
- st,trim-hs-current = <15>;
- st,trim-hs-impedance = <1>;
- st,tune-squelch-level = <3>;
- st,tune-hs-rx-offset = <2>;
- st,no-lsfs-sc;
+}; diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi index 5502eec94b..f8130bf445 100644 --- a/arch/arm/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi @@ -702,10 +702,26 @@
&usbphyc_port0 { phy-supply = <&vdd_usb>;
st,tune-hs-dc-level = <2>;
st,enable-fs-rftime-tuning;
st,enable-hs-rftime-reduction;
st,trim-hs-current = <15>;
st,trim-hs-impedance = <1>;
st,tune-squelch-level = <3>;
st,tune-hs-rx-offset = <2>;
st,no-lsfs-sc; };
&usbphyc_port1 { phy-supply = <&vdd_usb>;
st,tune-hs-dc-level = <2>;
st,enable-fs-rftime-tuning;
st,enable-hs-rftime-reduction;
st,trim-hs-current = <15>;
st,trim-hs-impedance = <1>;
st,tune-squelch-level = <3>;
st,tune-hs-rx-offset = <2>;
st,no-lsfs-sc; };
&vrefbuf {
Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com
Thanks Patrice _______________________________________________ Uboot-stm32 mailing list Uboot-stm32@st-md-mailman.stormreply.com https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32
Applied to u-boot-stm32
This is for next, right ?