Hi!
On Thu 2012-02-23 15:49:02, Marek Vasut wrote:
On Thursday 23 February 2012 15:17:19 Pavel Machek wrote:
My experience is mostly SPEAr600 only right now. Not sure if there are bigger differences between those SoC's in the BootROM.
I believe the spear600 is totally different from 1300. But, simple:
reset halt ; load ... ; go ...
combo should work I believe. In case you're loading some U-Boot SPL,
it's very
I have a problem here: "reset halt" does not reset the board; probably some kind of BDI problem. I tried playing with BDI config, but was not successful.
I tried to load u-boot from u-boot using:
u-boot> tftp 0x00700000 192.168.1.1:/spear1310eval/u-boot.bin
Using mii0 device TFTP from server 192.168.1.1; our IP address is 192.168.20.47 Filename '/spear1310eval/u-boot.bin'. Load address: 0x700000 Loading: ############## done Bytes transferred = 193032 (2f208 hex) u-boot> go 0x00700000 ## Starting application at 0x00700000 ...
U-Boot 2010.03-lsp-3.0-rc7 (Sep 15 2011 - 13:52:19) SPEAr-emlix-CCLite-BSP-0.11
...it started something. According to gdb it looks like "new" u-boot executes briefly, but fails in C code while processing intialization, and it seems that "old" u-boot takes over. (Some kind of failure and board resets itself?).
Well yea, loading uboot from uboot isn't supported.
Any ideas? Pavel