On 29/03/2019 14:42, Patrick Delaunay wrote:
This patch-set created after Marek remarks on patch board: stm32mp1: Add tx_fifo_sz_array support http://patchwork.ozlabs.org/patch/1056452/
This serie convert the DWC2 to driver model and use it for the stm32mp1 boards.
USB device and cable connection tested on EV1 and DK2.
This serie superseded the Patrice patches: http://patchwork.ozlabs.org/project/uboot/list/?series=97121
Warning: the serie need to be apply after http://patchwork.ozlabs.org/project/uboot/list/?series=91422 http://patchwork.ozlabs.org/project/uboot/list/?series=91497
Hi Patrice,
The second patch series doesn't apply cleanly anymore, could you rebase and resend so I can test this series?
Regards, Jack.
Patrice Chotard (1): usb: dwc2_udc_otg: Add tx_fifo_sz array support
Patrick Delaunay (15): phy: usbphyc: remove unused variable index phy: usbphyc: update xlate with DT binding phy: usbphyc: Binding update of vdda supply phy: usbphyc: move vdda1v1 and vdda1v8 in phy_init phy: usbphyc: increase PLL wait timeout usb: dwc2: remove unused variable regs_otg usb: dwc2: convert driver to DM_USB_GADGET usb: dwc2: force reset assert before to probe the driver usb: dwc2: Add force-b-session-valid support usb: dwc2: Add function for session B check usb: dwc2_udc_otg: Read MAX_HW_ENDPOINT from HWCFG4 register usb: dwc2: add support for STM32MP1 stm32mp1: remove CONFIG_USB_DWC2, HOST support for USBO stm32mp1: migrate USBOTG device to driver model stm32mp1: add stusb1600 support for DK1 and DK2 board
arch/arm/dts/stm32mp157-pinctrl.dtsi | 7 + arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 3 +- arch/arm/dts/stm32mp157a-dk1.dts | 34 +- arch/arm/dts/stm32mp157c-ed1.dts | 8 - arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi | 1 + arch/arm/dts/stm32mp157c.dtsi | 5 +- board/st/stm32mp1/stm32mp1.c | 185 +++------- configs/stm32mp15_basic_defconfig | 2 +- configs/stm32mp15_trusted_defconfig | 2 +- doc/device-tree-bindings/phy/phy-stm32-usbphyc.txt | 4 +- doc/device-tree-bindings/usb/dwc2.txt | 58 +++ drivers/phy/phy-stm32-usbphyc.c | 111 +++--- drivers/usb/gadget/dwc2_udc_otg.c | 388 ++++++++++++++++++++- drivers/usb/gadget/dwc2_udc_otg_priv.h | 1 - drivers/usb/gadget/dwc2_udc_otg_regs.h | 31 +- include/usb/dwc2_udc.h | 7 + 16 files changed, 627 insertions(+), 220 deletions(-) create mode 100644 doc/device-tree-bindings/usb/dwc2.txt