This adds support writing to the sandbox mmc backed by an in-memory buffer. The unit test has been updated to test reading, writing, and erasing. I'm not sure what MMCs erase to; I picked 0, but if it's 0xFF then that can be easily changed.
Signed-off-by: Sean Anderson sean.anderson@seco.com Reviewed-by: Simon Glass sjg@chromium.org ---
Changes in v4: - xxx_auto_alloc_size -> xxx_auto
drivers/mmc/sandbox_mmc.c | 43 +++++++++++++++++++++++++++++++++------ test/dm/mmc.c | 19 ++++++++++++----- 2 files changed, 51 insertions(+), 11 deletions(-)
diff --git a/drivers/mmc/sandbox_mmc.c b/drivers/mmc/sandbox_mmc.c index 8a2391d651..18ba020aac 100644 --- a/drivers/mmc/sandbox_mmc.c +++ b/drivers/mmc/sandbox_mmc.c @@ -17,6 +17,17 @@ struct sandbox_mmc_plat { struct mmc mmc; };
+#define MMC_CSIZE 0 +#define MMC_CMULT 8 /* 8 because the card is high-capacity */ +#define MMC_BL_LEN_SHIFT 10 +#define MMC_BL_LEN BIT(MMC_BL_LEN_SHIFT) +#define MMC_CAPACITY (((MMC_CSIZE + 1) << (MMC_CMULT + 2)) \ + * MMC_BL_LEN) /* 1 MiB */ + +struct sandbox_mmc_priv { + u8 buf[MMC_CAPACITY]; +}; + /** * sandbox_mmc_send_cmd() - Emulate SD commands * @@ -26,6 +37,10 @@ struct sandbox_mmc_plat { static int sandbox_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, struct mmc_data *data) { + struct sandbox_mmc_priv *priv = dev_get_priv(dev); + struct mmc *mmc = mmc_get_mmc_dev(dev); + static ulong erase_start, erase_end; + switch (cmd->cmdidx) { case MMC_CMD_ALL_SEND_CID: memset(cmd->response, '\0', sizeof(cmd->response)); @@ -44,8 +59,9 @@ static int sandbox_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, break; case MMC_CMD_SEND_CSD: cmd->response[0] = 0; - cmd->response[1] = 10 << 16; /* 1 << block_len */ - cmd->response[2] = 0; + cmd->response[1] = (MMC_BL_LEN_SHIFT << 16) | + ((MMC_CSIZE >> 16) & 0x3f); + cmd->response[2] = (MMC_CSIZE & 0xffff) << 16; cmd->response[3] = 0; break; case SD_CMD_SWITCH_FUNC: { @@ -59,13 +75,27 @@ static int sandbox_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, break; } case MMC_CMD_READ_SINGLE_BLOCK: - memset(data->dest, '\0', data->blocksize); - break; case MMC_CMD_READ_MULTIPLE_BLOCK: - strcpy(data->dest, "this is a test"); + memcpy(data->dest, &priv->buf[cmd->cmdarg * data->blocksize], + data->blocks * data->blocksize); + break; + case MMC_CMD_WRITE_SINGLE_BLOCK: + case MMC_CMD_WRITE_MULTIPLE_BLOCK: + memcpy(&priv->buf[cmd->cmdarg * data->blocksize], data->src, + data->blocks * data->blocksize); break; case MMC_CMD_STOP_TRANSMISSION: break; + case SD_CMD_ERASE_WR_BLK_START: + erase_start = cmd->cmdarg; + break; + case SD_CMD_ERASE_WR_BLK_END: + erase_end = cmd->cmdarg; + break; + case MMC_CMD_ERASE: + memset(&priv->buf[erase_start * mmc->write_bl_len], '\0', + (erase_end - erase_start + 1) * mmc->write_bl_len); + break; case SD_CMD_APP_SEND_OP_COND: cmd->response[0] = OCR_BUSY | OCR_HCS; cmd->response[1] = 0; @@ -148,5 +178,6 @@ U_BOOT_DRIVER(mmc_sandbox) = { .bind = sandbox_mmc_bind, .unbind = sandbox_mmc_unbind, .probe = sandbox_mmc_probe, - .plat_auto = sizeof(struct sandbox_mmc_plat), + .priv_auto = sizeof(struct sandbox_mmc_priv), + .plat_auto = sizeof(struct sandbox_mmc_plat), }; diff --git a/test/dm/mmc.c b/test/dm/mmc.c index 4e5136c850..f744452ff2 100644 --- a/test/dm/mmc.c +++ b/test/dm/mmc.c @@ -29,16 +29,25 @@ static int dm_test_mmc_blk(struct unit_test_state *uts) { struct udevice *dev; struct blk_desc *dev_desc; - char cmp[1024]; + int i; + char write[1024], read[1024];
ut_assertok(uclass_get_device(UCLASS_MMC, 0, &dev)); ut_assertok(blk_get_device_by_str("mmc", "0", &dev_desc));
- /* Read a few blocks and look for the string we expect */ + /* Write a few blocks and verify that we get the same data back */ ut_asserteq(512, dev_desc->blksz); - memset(cmp, '\0', sizeof(cmp)); - ut_asserteq(2, blk_dread(dev_desc, 0, 2, cmp)); - ut_assertok(strcmp(cmp, "this is a test")); + for (i = 0; i < sizeof(write); i++) + write[i] = i; + ut_asserteq(2, blk_dwrite(dev_desc, 0, 2, write)); + ut_asserteq(2, blk_dread(dev_desc, 0, 2, read)); + ut_asserteq_mem(write, read, sizeof(write)); + + /* Now erase them */ + memset(write, '\0', sizeof(write)); + ut_asserteq(2, blk_derase(dev_desc, 0, 2)); + ut_asserteq(2, blk_dread(dev_desc, 0, 2, read)); + ut_asserteq_mem(write, read, sizeof(write));
return 0; }