Enable the various options needed for display to work on the qemu-x86_64 board. This includes expanding the available malloc() memory in SPL, since the PCI bus must be enumerated in order to find the video device.
It also includes enabling a bloblist, so that the video parameters can be passed. This is placed at address 10000 but is not needed after U-Boot proper reads the information there.
Signed-off-by: Simon Glass sjg@chromium.org ---
(no changes since v1)
configs/qemu-x86_64_defconfig | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig index f29a5aa0f81..371ca9de842 100644 --- a/configs/qemu-x86_64_defconfig +++ b/configs/qemu-x86_64_defconfig @@ -7,6 +7,7 @@ CONFIG_MAX_CPUS=2 CONFIG_SPL_DM_SPI=y CONFIG_DEFAULT_DEVICE_TREE="qemu-x86_i440fx" CONFIG_SPL_TEXT_BASE=0xfffd0000 +CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000 CONFIG_DEBUG_UART_BASE=0x3f8 CONFIG_DEBUG_UART_CLOCK=1843200 CONFIG_X86_RUN_64BIT=y @@ -29,7 +30,10 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_PCI_INIT_R=y +CONFIG_BLOBLIST=y +CONFIG_BLOBLIST_ADDR=0x10000 CONFIG_SPL_NO_BSS_LIMIT=y +CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_CPU=y CONFIG_SPL_ENV_SUPPORT=y @@ -69,10 +73,12 @@ CONFIG_LBA48=y CONFIG_SYS_64BIT_LBA=y CONFIG_CPU=y CONFIG_NVME_PCI=y +CONFIG_SPL_PCI_PNP=y CONFIG_SPL_DM_RTC=y CONFIG_SYS_NS16550_PORT_MAPPED=y CONFIG_SPI=y CONFIG_USB_KEYBOARD=y +CONFIG_SPL_VIDEO=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_USER=y CONFIG_FRAMEBUFFER_VESA_MODE=0x144