The '#' used as comments in the files cause the preprocessor trouble, so change to /* */.
The mkimage command which uses this preprocessor output was moved to arch/arm/imx-common/Makefile
.gitignore was updated to ignore .cfgtmp files.
Signed-off-by: Troy Kisky troy.kisky@boundarydevices.com --- v2: moved the mkimage call to arch/arm/imx-common Makefile updated spl/Makefile as well added board/woodburn/imximage.cfg conversion
v3: added .gitignore to commit message added mkimage command move to commit message --- .gitignore | 1 + Makefile | 8 +- arch/arm/cpu/arm926ejs/config.mk | 2 +- arch/arm/cpu/armv7/config.mk | 2 +- arch/arm/imx-common/Makefile | 13 ++ board/esg/ima3-mx53/imximage.cfg | 120 ++++++----- board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg | 90 ++++---- board/freescale/mx25pdk/imximage.cfg | 77 +++---- board/freescale/mx51evk/imximage.cfg | 114 +++++----- board/freescale/mx53ard/imximage_dd3.cfg | 83 ++++---- board/freescale/mx53evk/imximage.cfg | 86 ++++---- board/freescale/mx53loco/imximage.cfg | 83 ++++---- board/freescale/mx53smd/imximage.cfg | 83 ++++---- board/freescale/mx6qarm2/imximage.cfg | 88 ++++---- board/freescale/mx6qsabreauto/imximage.cfg | 82 +++---- board/genesi/mx51_efikamx/imximage_mx.cfg | 132 ++++++------ board/genesi/mx51_efikamx/imximage_sb.cfg | 126 +++++------ board/ttcontrol/vision2/imximage_hynix.cfg | 295 ++++++++++++++------------ board/woodburn/imximage.cfg | 2 +- spl/Makefile | 7 +- 20 files changed, 791 insertions(+), 703 deletions(-)
diff --git a/.gitignore b/.gitignore index a163728..e40eb7b 100644 --- a/.gitignore +++ b/.gitignore @@ -15,6 +15,7 @@ *.swp *.patch *.bin +*.cfgtmp
# Build tree /build-* diff --git a/Makefile b/Makefile index 3305e8c..7ba7766 100644 --- a/Makefile +++ b/Makefile @@ -467,9 +467,8 @@ $(obj)u-boot.img: $(obj)u-boot.bin sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ -d $< $@
-$(obj)u-boot.imx: $(obj)u-boot.bin - $(obj)tools/mkimage -n $(CONFIG_IMX_CONFIG) -T imximage \ - -e $(CONFIG_SYS_TEXT_BASE) -d $< $@ +$(OBJTREE)/u-boot.imx : $(obj)u-boot.bin $(SUBDIR_TOOLS) depend + $(MAKE) -C $(SRCTREE)/arch/arm/imx-common $@
$(obj)u-boot.kwb: $(obj)u-boot.bin $(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \ @@ -843,7 +842,8 @@ clean: @$(MAKE) -s -C doc/DocBook/ cleandocs @find $(OBJTREE) -type f \ ( -name 'core' -o -name '*.bak' -o -name '*~' -o -name '*.su' \ - -o -name '*.o' -o -name '*.a' -o -name '*.exe' ) -print \ + -o -name '*.o' -o -name '*.a' -o -name '*.exe' \ + -o -name '*.cfgtmp' ) -print \ | xargs rm -f
# Removes everything not needed for testing u-boot diff --git a/arch/arm/cpu/arm926ejs/config.mk b/arch/arm/cpu/arm926ejs/config.mk index 6a3a1bb..47f24f5 100644 --- a/arch/arm/cpu/arm926ejs/config.mk +++ b/arch/arm/cpu/arm926ejs/config.mk @@ -34,6 +34,6 @@ PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT)
ifneq ($(CONFIG_IMX_CONFIG),)
-ALL-y += $(obj)u-boot.imx +ALL-y += $(OBJTREE)/u-boot.imx
endif diff --git a/arch/arm/cpu/armv7/config.mk b/arch/arm/cpu/armv7/config.mk index 9c3e2f3..350e946 100644 --- a/arch/arm/cpu/armv7/config.mk +++ b/arch/arm/cpu/armv7/config.mk @@ -40,5 +40,5 @@ PF_NO_UNALIGNED := $(call cc-option, -mno-unaligned-access,) PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED)
ifneq ($(CONFIG_IMX_CONFIG),) -ALL-y += $(obj)u-boot.imx +ALL-y += $(OBJTREE)/u-boot.imx endif diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile index b3e608e..6309fcd 100644 --- a/arch/arm/imx-common/Makefile +++ b/arch/arm/imx-common/Makefile @@ -42,6 +42,19 @@ all: $(obj).depend $(LIB) $(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS))
+$(OBJTREE)/$(patsubst "%",%,$(CONFIG_IMX_CONFIG)).cfgtmp: $(OBJTREE)/%.cfgtmp : $(SRCTREE)/% + mkdir -p $(dir $@) + $(CC) -E -x c $< $(CPPFLAGS) -o $@ + +$(OBJTREE)/u-boot.imx: $(OBJTREE)/u-boot.bin $(OBJTREE)/$(patsubst "%",%,$(CONFIG_IMX_CONFIG)).cfgtmp + $(OBJTREE)/tools/mkimage -n $(filter-out %.bin,$^) -T imximage \ + -e $(CONFIG_SYS_TEXT_BASE) -d $< $@ + +$(OBJTREE)/SPL: $(OBJTREE)/spl/u-boot-spl.bin $(OBJTREE)/$(patsubst "%",%,$(CONFIG_IMX_CONFIG)).cfgtmp + $(OBJTREE)/tools/mkimage -n $(filter-out %.bin,$^) -T imximage \ + -e $(CONFIG_SPL_TEXT_BASE) -d $< $@ + + #########################################################################
# defines $(obj).depend target diff --git a/board/esg/ima3-mx53/imximage.cfg b/board/esg/ima3-mx53/imximage.cfg index fa6b42d..fce7492 100644 --- a/board/esg/ima3-mx53/imximage.cfg +++ b/board/esg/ima3-mx53/imximage.cfg @@ -1,50 +1,52 @@ -# -# (C) Copyright 2012 -# Stefano Babic DENX Software Engineering sbabic@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# image version +/* + * (C) Copyright 2012 + * Stefano Babic DENX Software Engineering sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */
+/* image version */ IMAGE_VERSION 2
-# Boot Device : one of -# spi, sd (the board has no nand neither onenand) - +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM nor
-# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register - -# IOMUX for RAM only +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +/* IOMUX for RAM only */ DATA 4 0x53fa8554 0x300020 DATA 4 0x53fa8560 0x300020 DATA 4 0x53fa8594 0x300020 @@ -72,37 +74,47 @@ DATA 4 0x53fa86fc 0x0 DATA 4 0x53fa86f4 0x0 DATA 4 0x53fa8714 0x0 DATA 4 0x53fa8724 0x4000000 -# -# DDR RAM + +/* DDR RAM */ DATA 4 0x63fd9088 0x40404040 DATA 4 0x63fd9090 0x40404040 DATA 4 0x63fd907C 0x01420143 DATA 4 0x63fd9080 0x01450146 DATA 4 0x63fd9018 0x00111740 DATA 4 0x63fd9000 0x84190000 -# esdcfgX + +/* esdcfgX */ DATA 4 0x63fd900C 0x9f5152e3 DATA 4 0x63fd9010 0xb68e8a63 DATA 4 0x63fd9014 0x01ff00db -# Read/Write command delay + +/* Read/Write command delay */ DATA 4 0x63fd902c 0x000026d2 -# Out of reset delays + +/* Out of reset delays */ DATA 4 0x63fd9030 0x00ff0e21 -# ESDCTL ODT timing control + +/* ESDCTL ODT timing control */ DATA 4 0x63fd9008 0x12273030 -# ESDCTL power down control + +/* ESDCTL power down control */ DATA 4 0x63fd9004 0x0002002d -# Set registers in DDR memory chips + +/* Set registers in DDR memory chips */ DATA 4 0x63fd901c 0x00008032 DATA 4 0x63fd901c 0x00008033 DATA 4 0x63fd901c 0x00028031 DATA 4 0x63fd901c 0x052080b0 DATA 4 0x63fd901c 0x04008040 -# ESDCTL refresh control + +/* ESDCTL refresh control */ DATA 4 0x63fd9020 0x00005800 -# PHY ZQ HW control + +/* PHY ZQ HW control */ DATA 4 0x63fd9040 0x05380003 -# PHY ODT control + +/* PHY ODT control */ DATA 4 0x63fd9058 0x00022222 -# start DDR3 + +/* start DDR3 */ DATA 4 0x63fd901c 0x00000000 diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg index 62498ab..c86cd40 100644 --- a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg +++ b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg @@ -1,47 +1,51 @@ -# Copyright (C) 2011 Freescale Semiconductor, Inc. -# Jason Liu r64343@freescale.com -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# image version - +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Jason Liu r64343@freescale.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ IMAGE_VERSION 2
-# Boot Device : one of -# spi, sd (the board has no nand neither onenand) - +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM sd
-# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ DATA 4 0x020e05a8 0x00000030 DATA 4 0x020e05b0 0x00000030 DATA 4 0x020e0524 0x00000030 @@ -154,7 +158,7 @@ DATA 4 0x021b48b8 0x00000800 DATA 4 0x021b001c 0x00000000 DATA 4 0x021b0404 0x00011006
-# set the default clock gate to save power +/* set the default clock gate to save power */ DATA 4 0x020c4068 0x00C03F3F DATA 4 0x020c406c 0x0030FC03 DATA 4 0x020c4070 0x0FFFC000 @@ -163,8 +167,8 @@ DATA 4 0x020c4078 0x00FFF300 DATA 4 0x020c407c 0x0F0000C3 DATA 4 0x020c4080 0x000003FF
-# enable AXI cache for VDOA/VPU/IPU +/* enable AXI cache for VDOA/VPU/IPU */ DATA 4 0x020e0010 0xF00000CF -# set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ DATA 4 0x020e0018 0x007F007F DATA 4 0x020e001c 0x007F007F diff --git a/board/freescale/mx25pdk/imximage.cfg b/board/freescale/mx25pdk/imximage.cfg index f7af7ff..c42a283 100644 --- a/board/freescale/mx25pdk/imximage.cfg +++ b/board/freescale/mx25pdk/imximage.cfg @@ -1,46 +1,49 @@ -# -# (C) Copyright 2009 -# Stefano Babic DENX Software Engineering sbabic@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# Boot Device : one of -# spi, sd (the board has no nand neither onenand) +/* + * (C) Copyright 2009 + * Stefano Babic DENX Software Engineering sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */
+/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM sd
-# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register - -# EIM config-CS5 init -- CPLD +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +/* EIM config-CS5 init -- CPLD */ DATA 4 0xB8002050 0x0000D843 DATA 4 0xB8002054 0x22252521 DATA 4 0xB8002058 0x22220A00
-# DDR2 init +/* DDR2 init */ DATA 4 0xB8001004 0x0076E83A DATA 4 0xB8001010 0x00000204 DATA 4 0xB8001000 0x92210000 @@ -67,7 +70,7 @@ DATA 4 0x43FAC454 0x00001000
DATA 4 0x53F80008 0x20034000
-# Enable the clocks +/* Enable the clocks */ DATA 4 0x53f8000c 0x1fffffff DATA 4 0x53f80010 0xffffffff DATA 4 0x53f80014 0xfdfff diff --git a/board/freescale/mx51evk/imximage.cfg b/board/freescale/mx51evk/imximage.cfg index a875e8f..3e141ee 100644 --- a/board/freescale/mx51evk/imximage.cfg +++ b/board/freescale/mx51evk/imximage.cfg @@ -1,46 +1,50 @@ -# -# (C Copyright 2009 -# Stefano Babic DENX Software Engineering sbabic@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# Boot Device : one of -# spi, sd (the board has no nand neither onenand) +/* + * (C Copyright 2009 + * Stefano Babic DENX Software Engineering sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */
+/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM spi
-# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */
-# Setting IOMUXC +/* Setting IOMUXC */ DATA 4 0x73FA88a0 0x200 DATA 4 0x73FA850c 0x20c5 DATA 4 0x73FA8510 0x20c5 @@ -65,22 +69,24 @@ DATA 4 0x73FA88a4 0x6 DATA 4 0x73FA88ac 0x6 DATA 4 0x73FA88b8 0x6
-# Setting DDR for micron -# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model -# CAS=3 BL=4 -# ESDCTL_ESDCTL0 +/* + * Setting DDR for micron + * 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model + * CAS=3 BL=4 + */ +/* ESDCTL_ESDCTL0 */ DATA 4 0x83FD9000 0x82a20000 -# ESDCTL_ESDCTL1 +/* ESDCTL_ESDCTL1 */ DATA 4 0x83FD9008 0x82a20000 -# ESDCTL_ESDMISC +/* ESDCTL_ESDMISC */ DATA 4 0x83FD9010 0x000ad0d0 -# ESDCTL_ESDCFG0 +/* ESDCTL_ESDCFG0 */ DATA 4 0x83FD9004 0x333574aa -# ESDCTL_ESDCFG1 +/* ESDCTL_ESDCFG1 */ DATA 4 0x83FD900C 0x333574aa
-# Init DRAM on CS0 -# ESDCTL_ESDSCR +/* Init DRAM on CS0 */ +/* ESDCTL_ESDSCR */ DATA 4 0x83FD9014 0x04008008 DATA 4 0x83FD9014 0x0000801a DATA 4 0x83FD9014 0x0000801b @@ -94,7 +100,7 @@ DATA 4 0x83FD9014 0x03808019 DATA 4 0x83FD9014 0x00408019 DATA 4 0x83FD9014 0x00008000
-# Init DRAM on CS1 +/* Init DRAM on CS1 */ DATA 4 0x83FD9014 0x0400800c DATA 4 0x83FD9014 0x0000801e DATA 4 0x83FD9014 0x0000801f @@ -108,12 +114,12 @@ DATA 4 0x83FD9014 0x0380801d DATA 4 0x83FD9014 0x0040801d DATA 4 0x83FD9014 0x00008004
-# Write to CTL0 +/* Write to CTL0 */ DATA 4 0x83FD9000 0xb2a20000 -# Write to CTL1 +/* Write to CTL1 */ DATA 4 0x83FD9008 0xb2a20000 -# ESDMISC +/* ESDMISC */ DATA 4 0x83FD9010 0x000ad6d0 -#ESDCTL_ESDCDLYGD +/* ESDCTL_ESDCDLYGD */ DATA 4 0x83FD9034 0x90000000 DATA 4 0x83FD9014 0x00000000 diff --git a/board/freescale/mx53ard/imximage_dd3.cfg b/board/freescale/mx53ard/imximage_dd3.cfg index 614d29e..4633e4d 100644 --- a/board/freescale/mx53ard/imximage_dd3.cfg +++ b/board/freescale/mx53ard/imximage_dd3.cfg @@ -1,48 +1,51 @@ -# -# (C) Copyright 2009 -# Stefano Babic DENX Software Engineering sbabic@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# image version +/* + * (C) Copyright 2009 + * Stefano Babic DENX Software Engineering sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */
+/* image version */ IMAGE_VERSION 2
-# Boot Device : one of -# spi, sd (the board has no nand neither onenand) - +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM sd
-# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ DATA 4 0x53fa8554 0x00300000 DATA 4 0x53fa8558 0x00300040 DATA 4 0x53fa8560 0x00300000 diff --git a/board/freescale/mx53evk/imximage.cfg b/board/freescale/mx53evk/imximage.cfg index 915fb2c..1cd61d5 100644 --- a/board/freescale/mx53evk/imximage.cfg +++ b/board/freescale/mx53evk/imximage.cfg @@ -1,50 +1,52 @@ -# -# (C Copyright 2009 -# Stefano Babic DENX Software Engineering sbabic@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# image version +/* + * (C Copyright 2009 + * Stefano Babic DENX Software Engineering sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */
+/* image version */ IMAGE_VERSION 2
-# Boot Device : one of -# spi, sd (the board has no nand neither onenand) - +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM sd
-# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register - -# Setting IOMUXC +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +/* Setting IOMUXC */ DATA 4 0x53fa8554 0x00200000 DATA 4 0x53fa8560 0x00200000 DATA 4 0x53fa8594 0x00200000 diff --git a/board/freescale/mx53loco/imximage.cfg b/board/freescale/mx53loco/imximage.cfg index 2ce5f8d..e6b90c1 100644 --- a/board/freescale/mx53loco/imximage.cfg +++ b/board/freescale/mx53loco/imximage.cfg @@ -1,48 +1,51 @@ -# Copyright (C) 2011 Freescale Semiconductor, Inc. -# Jason Liu r64343@freescale.com -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# image version +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Jason Liu r64343@freescale.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */
+/* image version */ IMAGE_VERSION 2
-# Boot Device : one of -# spi, sd (the board has no nand neither onenand) - +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM sd
-# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register - +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ DATA 4 0x53fa8554 0x00300000 DATA 4 0x53fa8558 0x00300040 DATA 4 0x53fa8560 0x00300000 diff --git a/board/freescale/mx53smd/imximage.cfg b/board/freescale/mx53smd/imximage.cfg index 614d29e..4633e4d 100644 --- a/board/freescale/mx53smd/imximage.cfg +++ b/board/freescale/mx53smd/imximage.cfg @@ -1,48 +1,51 @@ -# -# (C) Copyright 2009 -# Stefano Babic DENX Software Engineering sbabic@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# image version +/* + * (C) Copyright 2009 + * Stefano Babic DENX Software Engineering sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */
+/* image version */ IMAGE_VERSION 2
-# Boot Device : one of -# spi, sd (the board has no nand neither onenand) - +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM sd
-# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ DATA 4 0x53fa8554 0x00300000 DATA 4 0x53fa8558 0x00300040 DATA 4 0x53fa8560 0x00300000 diff --git a/board/freescale/mx6qarm2/imximage.cfg b/board/freescale/mx6qarm2/imximage.cfg index bf941a3..4ed211e 100644 --- a/board/freescale/mx6qarm2/imximage.cfg +++ b/board/freescale/mx6qarm2/imximage.cfg @@ -1,47 +1,51 @@ -# Copyright (C) 2011 Freescale Semiconductor, Inc. -# Jason Liu r64343@freescale.com -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# image version - +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Jason Liu r64343@freescale.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ IMAGE_VERSION 2
-# Boot Device : one of -# spi, sd (the board has no nand neither onenand) - +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM sd
-# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ DATA 4 0x020e05a8 0x00000030 DATA 4 0x020e05b0 0x00000030 DATA 4 0x020e0524 0x00000030 @@ -166,8 +170,8 @@ DATA 4 0x020c4078 0x00FFF300 DATA 4 0x020c407c 0x0F0000C3 DATA 4 0x020c4080 0x000003FF
-# enable AXI cache for VDOA/VPU/IPU +/* enable AXI cache for VDOA/VPU/IPU */ DATA 4 0x020e0010 0xF00000CF -# set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ DATA 4 0x020e0018 0x007F007F DATA 4 0x020e001c 0x007F007F diff --git a/board/freescale/mx6qsabreauto/imximage.cfg b/board/freescale/mx6qsabreauto/imximage.cfg index d909aa8..bbff813 100644 --- a/board/freescale/mx6qsabreauto/imximage.cfg +++ b/board/freescale/mx6qsabreauto/imximage.cfg @@ -1,46 +1,50 @@ -# Copyright (C) 2012 Freescale Semiconductor, Inc. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# image version +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ +/* image version */
IMAGE_VERSION 2
-# Boot Device : one of -# spi, sd (the board has no nand neither onenand) - +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM sd
-# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ DATA 4 0x020e05a8 0x00000028 DATA 4 0x020e05b0 0x00000028 DATA 4 0x020e0524 0x00000028 @@ -126,7 +130,7 @@ DATA 4 0x021b0020 0x00005800 DATA 4 0x021b0818 0x00000007 DATA 4 0x021b4818 0x00000007
-# Calibration values based on ARD and 528MHz +/* Calibration values based on ARD and 528MHz */ DATA 4 0x021b083c 0x434B0358 DATA 4 0x021b0840 0x033D033C DATA 4 0x021b483c 0x03520362 diff --git a/board/genesi/mx51_efikamx/imximage_mx.cfg b/board/genesi/mx51_efikamx/imximage_mx.cfg index 38fa760..21ff6d6 100644 --- a/board/genesi/mx51_efikamx/imximage_mx.cfg +++ b/board/genesi/mx51_efikamx/imximage_mx.cfg @@ -1,52 +1,58 @@ -# -# Copyright (C) 2009 Pegatron Corporation -# Copyright (C) 2010 Marek Vasut marek.vasut@gmail.com -# Copyright (C) 2009-2012 Genesi USA, Inc. -# -# BASED ON: imx51evk -# -# (C) Copyright 2009 -# Stefano Babic DENX Software Engineering sbabic@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage +/* + * Copyright (C) 2009 Pegatron Corporation + * Copyright (C) 2010 Marek Vasut marek.vasut@gmail.com + * Copyright (C) 2009-2012 Genesi USA, Inc. + * + * BASED ON: imx51evk + * + * (C) Copyright 2009 + * Stefano Babic DENX Software Engineering sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */
-# Boot Device : one of -# spi, sd (the board has no nand neither onenand) +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM spi
-# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register - -# Essential GPIO settings to be done as early as possible -# PCBIDn pad settings are all the defaults except #2 which needs HVE off +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +/* + * Essential GPIO settings to be done as early as possible + * PCBIDn pad settings are all the defaults except #2 which needs HVE off + */ DATA 4 0x73fa8134 0x3 # PCBID0 ALT3 GPIO 3_16 DATA 4 0x73fa8130 0x3 # PCBID1 ALT3 GPIO 3_17 DATA 4 0x73fa8128 0x3 # PCBID2 ALT3 GPIO 3_11 @@ -55,7 +61,7 @@ DATA 4 0x73fa8198 0x3 # LED0 ALT3 GPIO 3_13 DATA 4 0x73fa81c4 0x3 # LED1 ALT3 GPIO 3_14 DATA 4 0x73fa81c8 0x3 # LED2 ALT3 GPIO 3_15
-# DDR bus IOMUX PAD settings +/* DDR bus IOMUX PAD settings */ DATA 4 0x73fa850c 0x20c5 # SDODT1 DATA 4 0x73fa8510 0x20c5 # SDODT0 DATA 4 0x73fa84ac 0xc5 # SDWE @@ -72,22 +78,24 @@ DATA 4 0x73fa84d8 0xc5 # DRAM_DQM1 DATA 4 0x73fa84dc 0xc5 # DRAM_DQM2 DATA 4 0x73fa84e0 0xc5 # DRAM_DQM3
-# Setting DDR for micron -# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model -# CAS=3 BL=4 -# ESDCTL_ESDCTL0 +/* + * Setting DDR for micron + * 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model + * CAS=3 BL=4 + */ +/* ESDCTL_ESDCTL0 */ DATA 4 0x83fd9000 0x82a20000 -# ESDCTL_ESDCTL1 +/* ESDCTL_ESDCTL1 */ DATA 4 0x83fd9008 0x82a20000 -# ESDCTL_ESDMISC +/* ESDCTL_ESDMISC */ DATA 4 0x83fd9010 0xcaaaf6d0 -# ESDCTL_ESDCFG0 +/* ESDCTL_ESDCFG0 */ DATA 4 0x83fd9004 0x3f3574aa -# ESDCTL_ESDCFG1 +/* ESDCTL_ESDCFG1 */ DATA 4 0x83fd900c 0x3f3574aa
-# Init DRAM on CS0 -# ESDCTL_ESDSCR +/* Init DRAM on CS0 */ +/* ESDCTL_ESDSCR */ DATA 4 0x83fd9014 0x04008008 DATA 4 0x83fd9014 0x0000801a DATA 4 0x83fd9014 0x0000801b @@ -101,7 +109,7 @@ DATA 4 0x83fd9014 0x03808019 DATA 4 0x83fd9014 0x00408019 DATA 4 0x83fd9014 0x00008000
-# Init DRAM on CS1 +/* Init DRAM on CS1 */ DATA 4 0x83fd9014 0x0400800c DATA 4 0x83fd9014 0x0000801e DATA 4 0x83fd9014 0x0000801f @@ -115,12 +123,12 @@ DATA 4 0x83fd9014 0x0380801d DATA 4 0x83fd9014 0x0040801d DATA 4 0x83fd9014 0x00008004
-# Write to CTL0 +/* Write to CTL0 */ DATA 4 0x83fd9000 0xb2a20000 -# Write to CTL1 +/* Write to CTL1 */ DATA 4 0x83fd9008 0xb2a20000 -# ESDMISC +/* ESDMISC */ DATA 4 0x83fd9010 0x000ad6d0 -#ESDCTL_ESDCDLYGD +/* ESDCTL_ESDCDLYGD */ DATA 4 0x83fd9034 0x90000000 DATA 4 0x83fd9014 0x00000000 diff --git a/board/genesi/mx51_efikamx/imximage_sb.cfg b/board/genesi/mx51_efikamx/imximage_sb.cfg index 26d259f..7ddd0b1 100644 --- a/board/genesi/mx51_efikamx/imximage_sb.cfg +++ b/board/genesi/mx51_efikamx/imximage_sb.cfg @@ -1,51 +1,55 @@ -# -# Copyright (C) 2009 Pegatron Corporation -# Copyright (C) 2010 Marek Vasut marek.vasut@gmail.com -# Copyright (C) 2009-2012 Genesi USA, Inc. -# -# BASED ON: imx51evk -# -# (C) Copyright 2009 -# Stefano Babic DENX Software Engineering sbabic@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage +/* + * Copyright (C) 2009 Pegatron Corporation + * Copyright (C) 2010 Marek Vasut marek.vasut@gmail.com + * Copyright (C) 2009-2012 Genesi USA, Inc. + * + * BASED ON: imx51evk + * + * (C) Copyright 2009 + * Stefano Babic DENX Software Engineering sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */
-# Boot Device : one of -# spi, sd (the board has no nand neither onenand) +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM spi
-# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register - -# DDR bus IOMUX PAD settings +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register +*/ +/* DDR bus IOMUX PAD settings */ DATA 4 0x73fa88a0 0x200 # GRP_INMODE1 DATA 4 0x73fa850c 0x20c5 # SDODT1 DATA 4 0x73fa8510 0x20c5 # SDODT0 @@ -62,22 +66,24 @@ DATA 4 0x73fa84b4 0xe5 # SDCKE1 DATA 4 0x73fa84cc 0xe5 # DRAM_CS0 DATA 4 0x73fa84d0 0xe4 # DRAM_CS1
-# Setting DDR for micron -# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model -# CAS=3 BL=4 -# ESDCTL_ESDCTL0 +/* + * Setting DDR for micron + * 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model + * CAS=3 BL=4 + */ +/* ESDCTL_ESDCTL0 */ DATA 4 0x83fd9000 0x82a20000 -# ESDCTL_ESDCTL1 +/* ESDCTL_ESDCTL1 */ DATA 4 0x83fd9008 0x82a20000 -# ESDCTL_ESDMISC +/* ESDCTL_ESDMISC */ DATA 4 0x83fd9010 0xcaaaf6d0 -# ESDCTL_ESDCFG0 +/* ESDCTL_ESDCFG0 */ DATA 4 0x83fd9004 0x333574aa -# ESDCTL_ESDCFG1 +/* ESDCTL_ESDCFG1 */ DATA 4 0x83fd900c 0x333574aa
-# Init DRAM on CS0 -# ESDCTL_ESDSCR +/* Init DRAM on CS0 */ +/* ESDCTL_ESDSCR */ DATA 4 0x83fd9014 0x04008008 DATA 4 0x83fd9014 0x0000801a DATA 4 0x83fd9014 0x0000801b @@ -91,7 +97,7 @@ DATA 4 0x83fd9014 0x03808019 DATA 4 0x83fd9014 0x00408019 DATA 4 0x83fd9014 0x00008000
-# Init DRAM on CS1 +/* Init DRAM on CS1 */ DATA 4 0x83fd9014 0x0400800c DATA 4 0x83fd9014 0x0000801e DATA 4 0x83fd9014 0x0000801f @@ -105,12 +111,12 @@ DATA 4 0x83fd9014 0x0380801d DATA 4 0x83fd9014 0x0042801d DATA 4 0x83fd9014 0x00008004
-# Write to CTL0 +/* Write to CTL0 */ DATA 4 0x83fd9000 0xb2a20000 -# Write to CTL1 +/* Write to CTL1 */ DATA 4 0x83fd9008 0xb2a20000 -# ESDMISC +/* ESDMISC */ DATA 4 0x83fd9010 0xcaaaf6d0 -#ESDCTL_ESDCDLYGD +/* ESDCTL_ESDCDLYGD */ DATA 4 0x83fd9034 0x90000000 DATA 4 0x83fd9014 0x00000000 diff --git a/board/ttcontrol/vision2/imximage_hynix.cfg b/board/ttcontrol/vision2/imximage_hynix.cfg index ed531db..c1de94f 100644 --- a/board/ttcontrol/vision2/imximage_hynix.cfg +++ b/board/ttcontrol/vision2/imximage_hynix.cfg @@ -1,209 +1,228 @@ -# -# (C) Copyright 2009 -# Stefano Babic DENX Software Engineering sbabic@denx.de. -# -# (C) Copyright 2010 -# Klaus Steinhammer TTECH Control Gmbh kst@tttech.com -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# Boot Device : one of -# spi, nand, onenand, sd - +/* + * (C) Copyright 2009 + * Stefano Babic DENX Software Engineering sbabic@denx.de. + * + * (C) Copyright 2010 + * Klaus Steinhammer TTECH Control Gmbh kst@tttech.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* + * Boot Device : one of + * spi, nand, onenand, sd + */ BOOT_FROM spi
-# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register - -####################### -### Disable WDOG ### -####################### +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +/* + * ####################### + * ### Disable WDOG ### + * ####################### + */ DATA 2 0x73f98000 0x30
-####################### -### SET DDR Clk ### -####################### - -# CCM: CBMCR - ddr_clk_sel: axi_b (133MHz) +/* + * ####################### + * ### SET DDR Clk ### + * ####################### + */ +/* CCM: CBMCR - ddr_clk_sel: axi_b (133MHz) */ DATA 4 0x73FD4018 0x000024C0
-# DOUBLE SPI CLK (13MHz->26 MHz Clock) +/* DOUBLE SPI CLK (13MHz->26 MHz Clock) */ DATA 4 0x73FD4038 0x2010241
-#IOMUXC_SW_PAD_CTL_PAD_CSPI1_MOSI HYS_ENABLE | DRV_MAX | SRE_FAST +/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_MOSI HYS_ENABLE | DRV_MAX | SRE_FAST */ DATA 4 0x73fa8600 0x00000107 -#IOMUXC_SW_PAD_CTL_PAD_CSPI1_MISO HYS_ENABLE | DRV_MAX | SRE_FAST +/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_MISO HYS_ENABLE | DRV_MAX | SRE_FAST */ DATA 4 0x73fa8604 0x00000107 -#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS0 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST +/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS0 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST */ DATA 4 0x73fa8608 0x00000187 -#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS1 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST +/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS1 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST */ DATA 4 0x73fa860c 0x00000187 -#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SCLK HYS_ENABLE | DRV_MAX | SRE_FAST +/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SCLK HYS_ENABLE | DRV_MAX | SRE_FAST */ DATA 4 0x73fa8614 0x00000107 -#IOMUXC_SW_PAD_CTL_PAD_DI1_PIN11 HYS_ENABLE | DRV_MAX | SRE_FAST (CSPI1_SS2) +/* IOMUXC_SW_PAD_CTL_PAD_DI1_PIN11 HYS_ENABLE | DRV_MAX | SRE_FAST (CSPI1_SS2) */ DATA 4 0x73fa86a8 0x00000187
-####################### -### Settings IOMUXC ### -####################### - -# DDR IOMUX configuration -# Control, Data, Address pads are in their default state: HIGH DS, FAST SR. -# IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK MAX DS +/* + * ####################### + * ### Settings IOMUXC ### + * ####################### + */ +/* + * DDR IOMUX configuration + * Control, Data, Address pads are in their default state: HIGH DS, FAST SR. + * IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK MAX DS + */ DATA 4 0x73fa84b8 0x000000e7 -# PVTC MAX (at GPC, PGR reg) -#DATA 4 0x73FD8004 0x1fc00000 +/* PVTC MAX (at GPC, PGR reg) */ +/* DATA 4 0x73FD8004 0x1fc00000 */
-#DQM0 DS high slew rate slow +/* DQM0 DS high slew rate slow */ DATA 4 0x73fa84d4 0x000000e4 -#DQM1 DS high slew rate slow +/* DQM1 DS high slew rate slow */ DATA 4 0x73fa84d8 0x000000e4 -#DQM2 DS high slew rate slow +/* DQM2 DS high slew rate slow */ DATA 4 0x73fa84dc 0x000000e4 -#DQM3 DS high slew rate slow +/* DQM3 DS high slew rate slow */ DATA 4 0x73fa84e0 0x000000e4
-#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 DS high & SLEW slow +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 DS high & SLEW slow */ DATA 4 0x73fa84bc 0x000000c4 -#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 DS high & SLEW slow +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 DS high & SLEW slow */ DATA 4 0x73fa84c0 0x000000c4 -#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 DS high & SLEW slow +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 DS high & SLEW slow */ DATA 4 0x73fa84c4 0x000000c4 -#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 DS high & SLEW slow +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 DS high & SLEW slow */ DATA 4 0x73fa84c8 0x000000c4
-#DRAM_DATA B0 +/* DRAM_DATA B0 */ DATA 4 0x73fa88a4 0x00000004 -#DRAM_DATA B1 +/* DRAM_DATA B1 */ DATA 4 0x73fa88ac 0x00000004 -#DRAM_DATA B2 +/* DRAM_DATA B2 */ DATA 4 0x73fa88b8 0x00000004 -#DRAM_DATA B3 +/* DRAM_DATA B3 */ DATA 4 0x73fa882c 0x00000004
-#DRAM_DATA B0 slew rate +/* DRAM_DATA B0 slew rate */ DATA 4 0x73fa8878 0x00000000 -#DRAM_DATA B1 slew rate +/* DRAM_DATA B1 slew rate */ DATA 4 0x73fa8880 0x00000000 -#DRAM_DATA B2 slew rate +/* DRAM_DATA B2 slew rate */ DATA 4 0x73fa888c 0x00000000 -#DRAM_DATA B3 slew rate +/* DRAM_DATA B3 slew rate */ DATA 4 0x73fa889c 0x00000000
-####################### -### Configure SDRAM ### -####################### +/* + * ####################### + * ### Configure SDRAM ### + * ####################### + */
-# Configure CS0 -####################### +/* Configure CS0 */ +/* ####################### */
-# ESDCTL0: Enable controller +/* ESDCTL0: Enable controller */ DATA 4 0x83fd9000 0x83220000
-# Init DRAM on CS0 -# ESDSCR: Precharge command +/* Init DRAM on CS0 / +/* ESDSCR: Precharge command */ DATA 4 0x83fd9014 0x04008008 -# ESDSCR: Refresh command +/* ESDSCR: Refresh command */ DATA 4 0x83fd9014 0x00008010 -# ESDSCR: Refresh command +/* ESDSCR: Refresh command */ DATA 4 0x83fd9014 0x00008010 -# ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8) +/* ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8) */ DATA 4 0x83fd9014 0x00338018 -# ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51) +/* ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51) */ DATA 4 0x83fd9014 0x0020801a -# ESDSCR +/* ESDSCR */ DATA 4 0x83fd9014 0x00008000
-# ESDSCR: EMR with full Drive strength -#DATA 4 0x83fd9014 0x0000801a +/* ESDSCR: EMR with full Drive strength */ +/* DATA 4 0x83fd9014 0x0000801a */
-# ESDCTL0: 14 ROW, 10 COL, 32Bit, SREF=8 +/* ESDCTL0: 14 ROW, 10 COL, 32Bit, SREF=8 */ DATA 4 0x83fd9000 0xC3220000
-# ESDCFG0: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks -# tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks -#DATA 4 0x83fd9004 0xC33574AA - -#micron mDDR -# ESDCFG0: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks -# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks -#DATA 4 0x83FD9004 0x101564a8 - -#hynix mDDR -# ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks -# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks +/* + * ESDCFG0: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks + * tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks + * DATA 4 0x83fd9004 0xC33574AA + */ +/* + * micron mDDR + * ESDCFG0: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks + * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks + * DATA 4 0x83FD9004 0x101564a8 + */ +/* + * hynix mDDR + * ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks + * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks + */ DATA 4 0x83FD9004 0x704564a8
-# ESDMISC: AP=10, Bank interleaving on, MIF3 en, RALAT=2 +/* ESDMISC: AP=10, Bank interleaving on, MIF3 en, RALAT=2 */ DATA 4 0x83fd9010 0x000a1700
-# Configure CS1 -####################### +/* Configure CS1 */ +/* ####################### */
-# ESDCTL1: Enable controller +/* ESDCTL1: Enable controller */ DATA 4 0x83fd9008 0x83220000
-# Init DRAM on CS1 -# ESDSCR: Precharge command +/* Init DRAM on CS1 */ +/* ESDSCR: Precharge command */ DATA 4 0x83fd9014 0x0400800c -# ESDSCR: Refresh command +/* ESDSCR: Refresh command */ DATA 4 0x83fd9014 0x00008014 -# ESDSCR: Refresh command +/* ESDSCR: Refresh command */ DATA 4 0x83fd9014 0x00008014 -# ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8) +/* ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8) */ DATA 4 0x83fd9014 0x0033801c -# ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51) +/* ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51) */ DATA 4 0x83fd9014 0x0020801e -# ESDSCR +/* ESDSCR */ DATA 4 0x83fd9014 0x00008004
-# ESDCTL1: 14 ROW, 10 COL, 32Bit, SREF=8 +/* ESDCTL1: 14 ROW, 10 COL, 32Bit, SREF=8 */ DATA 4 0x83fd9008 0xC3220000 - -# ESDCFG1: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks -# tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks -#DATA 4 0x83fd900c 0xC33574AA - -#micron mDDR -# ESDCFG1: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks -# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks -#DATA 4 0x83FD900C 0x101564a8 - -#hynix mDDR -# ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks -# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks +/* + * ESDCFG1: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks + * tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks + * DATA 4 0x83fd900c 0xC33574AA + */ +/* + * micron mDDR + * ESDCFG1: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks + * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks + * DATA 4 0x83FD900C 0x101564a8 + */ +/* + * hynix mDDR + * ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks + * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks + */ DATA 4 0x83FD900C 0x704564a8
-# ESDSCR (mDRAM configuration finished) +/* ESDSCR (mDRAM configuration finished) */ DATA 4 0x83FD9014 0x00000004
-# ESDSCR - clear "configuration request" bit +/* ESDSCR - clear "configuration request" bit */ DATA 4 0x83fd9014 0x00000000 diff --git a/board/woodburn/imximage.cfg b/board/woodburn/imximage.cfg index b4cc8ec..ba42a5e 100644 --- a/board/woodburn/imximage.cfg +++ b/board/woodburn/imximage.cfg @@ -1,4 +1,4 @@ BOOT_FROM sd
-# DDR2 init +/* DDR2 init */ DATA 4 0xB8001010 0x00000304 diff --git a/spl/Makefile b/spl/Makefile index 6dbb105..d8efad0 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -141,11 +141,8 @@ $(OBJTREE)/MLO.byteswap: $(obj)u-boot-spl.bin $(OBJTREE)/tools/mkimage -T omapimage -n byteswap \ -a $(CONFIG_SPL_TEXT_BASE) -d $< $@
-ifneq ($(CONFIG_IMX_CONFIG),) -$(OBJTREE)/SPL: $(obj)u-boot-spl.bin - $(OBJTREE)/tools/mkimage -n $(SRCTREE)/$(CONFIG_IMX_CONFIG) -T imximage \ - -e $(CONFIG_SPL_TEXT_BASE) -d $< $@ -endif +$(OBJTREE)/SPL : $(obj)u-boot-spl.bin depend + $(MAKE) -C $(SRCTREE)/arch/arm/imx-common $@
ALL-y += $(obj)u-boot-spl.bin