Hi,
On 05/11/2020 15:15, Jerome Brunet wrote:
Add support for the Amlogic based libretech cc version 2. As version 1, it is based on the s905x SoC.
Signed-off-by: Jerome Brunet jbrunet@baylibre.com
arch/arm/dts/Makefile | 1 + ...eson-gxl-s905x-libretech-cc-v2-u-boot.dtsi | 7 ++ configs/libretech-cc_v2_defconfig | 82 +++++++++++++++++++ 3 files changed, 90 insertions(+) create mode 100644 arch/arm/dts/meson-gxl-s905x-libretech-cc-v2-u-boot.dtsi create mode 100644 configs/libretech-cc_v2_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index b195723f1645..e957820e8e62 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -159,6 +159,7 @@ dtb-$(CONFIG_ARCH_MESON) += \ meson-gxl-s905x-p212.dtb \ meson-gxl-s805x-libretech-ac.dtb \ meson-gxl-s905x-libretech-cc.dtb \
- meson-gxl-s905x-libretech-cc-v2.dtb \ meson-gxl-s905x-khadas-vim.dtb \ meson-gxl-s905d-libretech-pc.dtb \ meson-gxm-khadas-vim2.dtb \
This should be part of the previous patch
diff --git a/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2-u-boot.dtsi b/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2-u-boot.dtsi new file mode 100644 index 000000000000..8ff5a0ef2ba5 --- /dev/null +++ b/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2-u-boot.dtsi @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/*
- Copyright (c) 2020 BayLibre, SAS.
- Author: Jerome Brunet jbrunet@baylibre.com
- */
+#include "meson-gxl-u-boot.dtsi" diff --git a/configs/libretech-cc_v2_defconfig b/configs/libretech-cc_v2_defconfig new file mode 100644 index 000000000000..e71f88edaec6 --- /dev/null +++ b/configs/libretech-cc_v2_defconfig @@ -0,0 +1,82 @@ +CONFIG_ARM=y +CONFIG_ARCH_MESON=y +CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_ENV_SIZE=0x2000 +CONFIG_ENV_OFFSET=0xFFFF0000 +CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_DM_GPIO=y +CONFIG_MESON_GXL=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEBUG_UART_BASE=0xc81004c0 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_IDENT_STRING=" libretech-cc-v2" +CONFIG_DEBUG_UART=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_USE_PREBOOT=y +CONFIG_PREBOOT="usb start" +CONFIG_MISC_INIT_R=y +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_DISPLAY_BOARDINFO is not set +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +CONFIG_CMD_ADC=y +CONFIG_CMD_GPIO=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s905x-libretech-cc-v2" +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SARADC_MESON=y +CONFIG_DM_KEYBOARD=y +CONFIG_DM_MMC=y +CONFIG_MMC_MESON_GX=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_PHY_ADDR_ENABLE=y +CONFIG_PHY_ADDR=8 +CONFIG_PHY_MESON_GXL=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_PHY=y +CONFIG_MESON_GXL_USB_PHY=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_MESON_GXL=y +CONFIG_POWER_DOMAIN=y +CONFIG_MESON_GX_VPU_POWER_DOMAIN=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_RESET=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_MESON_SERIAL=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_MESON_SPIFC=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y +CONFIG_USB_DWC3=y +# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_KEYBOARD=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e +CONFIG_USB_GADGET_PRODUCT_NUM=0xfada +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_DM_VIDEO=y +# CONFIG_VIDEO_BPP8 is not set +# CONFIG_VIDEO_BPP16 is not set +CONFIG_SYS_WHITE_ON_BLACK=y +CONFIG_VIDEO_MESON=y +CONFIG_VIDEO_DT_SIMPLEFB=y +CONFIG_OF_LIBFDT_OVERLAY=y
And can you also update : doc/board/amlogic/libretech-cc.rst doc/board/amlogic/index.rst and board/amlogic/p212/MAINTAINERS
Thanks, Neil