From: Heiko Stuebner heiko.stuebner@theobroma-systems.com
This brings the actual rk3368-lion devicetree files from Linux 5.10 instead of using something separate.
Signed-off-by: Heiko Stuebner heiko.stuebner@theobroma-systems.com --- arch/arm/dts/Makefile | 2 +- ...ot.dtsi => rk3368-lion-haikou-u-boot.dtsi} | 4 + arch/arm/dts/rk3368-lion-haikou.dts | 140 +++++++++ .../dts/{rk3368-lion.dts => rk3368-lion.dtsi} | 271 +++++++++++++----- configs/lion-rk3368_defconfig | 2 + 5 files changed, 351 insertions(+), 68 deletions(-) rename arch/arm/dts/{rk3368-lion-u-boot.dtsi => rk3368-lion-haikou-u-boot.dtsi} (98%) create mode 100644 arch/arm/dts/rk3368-lion-haikou.dts rename arch/arm/dts/{rk3368-lion.dts => rk3368-lion.dtsi} (54%)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index fd47e408f8..fa2e8b5ef7 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -115,7 +115,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3328) += \ rk3328-rock-pi-e.dtb
dtb-$(CONFIG_ROCKCHIP_RK3368) += \ - rk3368-lion.dtb \ + rk3368-lion-haikou.dtb \ rk3368-sheep.dtb \ rk3368-geekbox.dtb \ rk3368-px5-evb.dtb \ diff --git a/arch/arm/dts/rk3368-lion-u-boot.dtsi b/arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi similarity index 98% rename from arch/arm/dts/rk3368-lion-u-boot.dtsi rename to arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi index 9bd6352755..7826d1e70b 100644 --- a/arch/arm/dts/rk3368-lion-u-boot.dtsi +++ b/arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi @@ -38,6 +38,10 @@ }; };
+&gpio2 { + u-boot,dm-pre-reloc; +}; + &pinctrl { u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/rk3368-lion-haikou.dts b/arch/arm/dts/rk3368-lion-haikou.dts new file mode 100644 index 0000000000..7fcb1eacea --- /dev/null +++ b/arch/arm/dts/rk3368-lion-haikou.dts @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH + */ + +/dts-v1/; +#include "rk3368-lion.dtsi" + +/ { + model = "Theobroma Systems RK3368-uQ7 Baseboard"; + compatible = "tsd,rk3368-lion-haikou", "rockchip,rk3368"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + i2cmux2 { + i2c@0 { + eeprom: eeprom@50 { + compatible = "atmel,24c01"; + pagesize = <8>; + reg = <0x50>; + }; + }; + }; + + leds { + pinctrl-0 = <&module_led_pins>, <&sd_card_led_pin>; + + sd_card_led: led-3 { + label = "sd_card_led"; + gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + }; + }; + + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc3v3_baseboard: vcc3v3-baseboard { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_baseboard"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_otg: vcc5v0-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-name = "vcc5v0_otg"; + regulator-always-on; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <25000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + rockchip,default-sample-phase = <90>; + vmmc-supply = <&vcc3v3_baseboard>; + status = "okay"; +}; + +&spi2 { + cs-gpios = <0>, <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; +}; + +&uart1 { + /* alternate function of GPIO5/6 */ + status = "disabled"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&haikou_pin_hog>; + + hog { + haikou_pin_hog: haikou-pin-hog { + rockchip,pins = + /* LID_BTN */ + <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, + /* BATLOW# */ + <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>, + /* SLP_BTN# */ + <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + /* BIOS_DISABLE# */ + <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + sd_card_led_pin: sd-card-led-pin { + rockchip,pins = + <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_cd_pin: sdmmc-cd-pin { + rockchip,pins = + <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb_otg { + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = + <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm/dts/rk3368-lion.dts b/arch/arm/dts/rk3368-lion.dtsi similarity index 54% rename from arch/arm/dts/rk3368-lion.dts rename to arch/arm/dts/rk3368-lion.dtsi index 2814542083..532e6a6828 100644 --- a/arch/arm/dts/rk3368-lion.dts +++ b/arch/arm/dts/rk3368-lion.dtsi @@ -1,25 +1,14 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH */
/dts-v1/; #include "rk3368.dtsi" -#include "rk3368-lion-u-boot.dtsi" -#include <dt-bindings/input/input.h>
/ { - model = "Theobroma Systems RK3368-uQ7 SoM"; - compatible = "tsd,rk3368-uq7", "tsd,lion", "rockchip,rk3368"; - - aliases { - mmc0 = &emmc; - mmc1 = &sdmmc; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; + chosen { + stdout-path = "serial0:115200n8"; };
ext_gmac: gmac-clk { @@ -29,6 +18,80 @@ #clock-cells = <0>; };
+ i2cmux1 { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c1>; + mux-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>; + + /* Q7_GPO_I2C */ + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* Q7_SMB */ + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + i2cmux2 { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c2>; + mux-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>; + + /* Q7_LVDS_BLC_I2C */ + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + fan: fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + #cooling-cells = <2>; + }; + + rtc_twi: rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + }; + }; + + /* Q7_GP2_I2C */ + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&module_led_pins>; + + module_led1: led-1 { + label = "module_led1"; + gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + panic-indicator; + }; + + module_led2: led-2 { + label = "module_led2"; + gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + vcc_sys: vcc-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -39,43 +102,81 @@ }; };
-&uart0 { - status = "okay"; +&cpu_l0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu>; };
&emmc { - status = "okay"; bus-width = <8>; - cap-mmc-highspeed; clock-frequency = <150000000>; - disable-wp; - keep-power-in-suspend; + mmc-hs200-1_8v; non-removable; - num-slots = <1>; vmmc-supply = <&vcc33_io>; vqmmc-supply = <&vcc18_io>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; -}; - -&sdmmc { status = "okay"; };
&gmac { - status = "okay"; - phy-supply = <&vcc33_io>; - phy-mode = "rgmii"; - clock_in_out = "input"; - snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <2 10000 50000>; assigned-clocks = <&cru SCLK_MAC>; assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + phy-handle = <&phy0>; + phy-supply = <&vcc33_io>; + phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; tx_delay = <0x10>; rx_delay = <0x10>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* Microsemi VSC8531-02 */ + phy0: phy@0 { + compatible = "ethernet-phy-id0007.0570"; + reg = <0>; + vsc8531,clk-out-frequency = <125000000>; + vsc8531,edge-slowdown = <7>; + vsc8531,led-0-mode = <1>; + vsc8531,led-1-mode = <2>; + }; + }; };
&i2c0 { @@ -85,7 +186,11 @@ compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio0>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; + clock-output-names = "xin32k", "rk808-clkout2"; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>, <&pmic_sleep>; rockchip,system-power-controller; vcc1-supply = <&vcc_sys>; vcc2-supply = <&vcc_sys>; @@ -98,97 +203,129 @@ vcc10-supply = <&vcc_sys>; vcc11-supply = <&vcc_sys>; vcc12-supply = <&vcc_sys>; - clock-output-names = "xin32k", "rk808-clkout2"; - #clock-cells = <1>;
regulators { vdd_cpu: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vdd_cpu"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1500000>; - regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; };
vdd_log: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vdd_log"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1500000>; - regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; };
vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; regulator-always-on; regulator-boot-on; - regulator-name = "vcc_ddr"; };
vcc33_io: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc33_io"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vcc33_io"; + regulator-always-on; + regulator-boot-on; };
vcc33_video: LDO_REG2 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc33_video"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vcc33_video"; + regulator-always-on; + regulator-boot-on; };
vdd10_pll: LDO_REG3 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vdd10_pll"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; - regulator-name = "vdd10_pll"; + regulator-always-on; + regulator-boot-on; };
vcc18_io: LDO_REG4 { - regulator-boot-on; + regulator-name = "vcc18_io"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_io"; + regulator-boot-on; };
vdd10_video: LDO_REG6 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vdd10_video"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; - regulator-name = "vdd10_video"; + regulator-always-on; + regulator-boot-on; };
vcc18_video: LDO_REG8 { - regulator-always-on; - regulator-boot-on; + regulator-name = "vcc18_video"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_video"; + regulator-always-on; + regulator-boot-on; }; }; }; };
-&uart0 { +&i2c1 { status = "okay"; };
-&spi1 { +&i2c2 { status = "okay"; +};
- #address-cells = <1>; - #size-cells = <0>; +&pinctrl { + leds { + module_led_pins: module-led-pins { + rockchip,pins = + <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + };
- spiflash: w25q32dw@0 { + pmic_sleep: pmic-sleep { + rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; + }; + }; +}; + +&spi1 { + status = "okay"; + + norflash: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <49500000>; - spi-cpol; - spi-cpha; + spi-max-frequency = <50000000>; }; }; + +&uart1 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/configs/lion-rk3368_defconfig b/configs/lion-rk3368_defconfig index b409715060..f547875dee 100644 --- a/configs/lion-rk3368_defconfig +++ b/configs/lion-rk3368_defconfig @@ -32,6 +32,7 @@ CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_TPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 CONFIG_SPL_ATF=y CONFIG_TPL=y @@ -44,6 +45,7 @@ CONFIG_CMD_MTDPARTS=y CONFIG_SPL_OF_CONTROL=y CONFIG_TPL_OF_CONTROL=y CONFIG_OF_LIVE=y +CONFIG_DEFAULT_DEVICE_TREE="rk3368-lion-haikou" CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent" CONFIG_TPL_OF_PLATDATA=y CONFIG_ENV_IS_IN_MMC=y