Add support for enabling and disabling vbus-supply regulator found on several imx8mp boards in the usb3_phy0 and usb3_phy1 nodes.
Without this I suspect U-Boot usb does not work on the following: - imx8mp-beacon-kit - imx8mp-msc-sm2s - imx8mp-verdin-wifi-dev
Signed-off-by: Tim Harvey tharvey@gateworks.com --- drivers/phy/phy-imx8mq-usb.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/phy-imx8mq-usb.c b/drivers/phy/phy-imx8mq-usb.c index 69f01de55538..eed9c07848f4 100644 --- a/drivers/phy/phy-imx8mq-usb.c +++ b/drivers/phy/phy-imx8mq-usb.c @@ -14,6 +14,7 @@ #include <linux/delay.h> #include <linux/err.h> #include <clk.h> +#include <power/regulator.h>
#define PHY_CTRL0 0x0 #define PHY_CTRL0_REF_SSP_EN BIT(2) @@ -81,6 +82,7 @@ struct imx8mq_usb_phy { #endif void __iomem *base; enum imx8mpq_phy_type type; + struct udevice *vbus_supply; };
static const struct udevice_id imx8mq_usb_phy_of_match[] = { @@ -173,9 +175,9 @@ static int imx8mq_usb_phy_power_on(struct phy *usb_phy) struct udevice *dev = usb_phy->dev; struct imx8mq_usb_phy *imx_phy = dev_get_priv(dev); u32 value; + int ret;
#if CONFIG_IS_ENABLED(CLK) - int ret; ret = clk_enable(&imx_phy->phy_clk); if (ret) { printf("Failed to enable usb phy clock\n"); @@ -183,6 +185,12 @@ static int imx8mq_usb_phy_power_on(struct phy *usb_phy) } #endif
+ if (CONFIG_IS_ENABLED(DM_REGULATOR) && imx_phy->vbus_supply) { + ret = regulator_set_enable(imx_phy->vbus_supply, true); + if (ret) + return ret; + } + /* Disable rx term override */ value = readl(imx_phy->base + PHY_CTRL6); value &= ~PHY_CTRL6_RXTERM_OVERRIDE_SEL; @@ -206,6 +214,9 @@ static int imx8mq_usb_phy_power_off(struct phy *usb_phy) clk_disable(&imx_phy->phy_clk); #endif
+ if (CONFIG_IS_ENABLED(DM_REGULATOR) && imx_phy->vbus_supply) + return regulator_set_enable(imx_phy->vbus_supply, false); + return 0; }
@@ -224,6 +235,7 @@ struct phy_ops imx8mq_usb_phy_ops = { int imx8mq_usb_phy_probe(struct udevice *dev) { struct imx8mq_usb_phy *priv = dev_get_priv(dev); + int ret;
priv->type = dev_get_driver_data(dev); priv->base = dev_read_addr_ptr(dev); @@ -232,7 +244,6 @@ int imx8mq_usb_phy_probe(struct udevice *dev) return -EINVAL;
#if CONFIG_IS_ENABLED(CLK) - int ret;
/* Assigned clock already set clock */ ret = clk_get_by_name(dev, "phy", &priv->phy_clk); @@ -242,6 +253,15 @@ int imx8mq_usb_phy_probe(struct udevice *dev) } #endif
+ if (CONFIG_IS_ENABLED(DM_REGULATOR)) { + ret = device_get_supply_regulator(dev, "vbus-supply", + &priv->vbus_supply); + if (ret && ret != -ENOENT) { + pr_err("Failed to get PHY regulator\n"); + return ret; + } + } + return 0; }