Oh ok. My main problem is that I DO have debug_uart but I don't have U-Boot main console. I already have the configuration on my defconf for the debug UART like this: CONFIG_DM=y CONFIG_DM_SERIAL=y CONFIG_DEBUG_UART=y CONFIG_DEBUG_UART_ATMEL=y CONFIG_DEBUG_UART_BASE=0xf8038200 CONFIG_DEBUG_UART_CLOCK=58000000 CONFIG_DEBUG_UART_BOARD_INIT=y CONFIG_DEBUG_UART_ANNOUNCE=y I cloned from the github repository *https://github.com/linux4sam/u-boot-at91 https://github.com/linux4sam/u-boot-at91* My configuration was derived from the sama5d2_xplained board because I'm working with a custom one.
On Mon, Feb 12, 2018 at 8:59 AM, Marek Vasut marex@denx.de wrote:
On 02/12/2018 03:52 PM, Mariano Coromac wrote:
Hello, I was hoping you could help me out with something. I just have 2 main questions. I am using a SAMA5D27 and I've managed to port AT91Bootloader and I'm currently on U-Boot
U-Boot SPL can bring SAMA5D2 up, you don't need the AT91 bootloader.
- I am trying to use FLEXCOM1 (UART) as the main console of U-Boot but
haven't been able to find any documentation saying where or how U-Boot specifies the console port.
$ git grep DEBUG_UART configs/sama5d2* configs/sama5d27_som1_ek_mmc_defconfig:CONFIG_DEBUG_UART=y configs/sama5d27_som1_ek_mmc_defconfig:CONFIG_DEBUG_UART_ATMEL=y configs/sama5d27_som1_ek_mmc_defconfig:CONFIG_DEBUG_UART_BASE=0xf8020000 configs/sama5d27_som1_ek_mmc_defconfig:CONFIG_DEBUG_UART_CLOCK=82000000 configs/sama5d27_som1_ek_mmc_defconfig:CONFIG_DEBUG_UART_BOARD_INIT=y configs/sama5d27_som1_ek_mmc_defconfig:CONFIG_DEBUG_UART_ANNOUNCE=y
would indicate there's a debug uart which you can use.
I'm adding atmel maintainer to CC and dropping dead contacts.
- When U-Boot tries to boot it gives me these errors:
bind node sdio-host@a0000000
- attempt to match compatible string 'atmel,sama5d2-sdhci'
No match for node 'sdio-host@a0000000' bind node sdio-host@b0000000
- attempt to match compatible string 'atmel,sama5d2-sdhci'
No match for node 'sdio-host@b0000000' bind node apb
- attempt to match compatible string 'simple-bus'
- found match at 'generic_simple_bus'
bind node pmc@f0014000
- attempt to match compatible string 'atmel,sama5d2-pmc'
- found match at 'at91-pmc'
bind node mainck
- attempt to match compatible string 'atmel,at91sam9x5-clk-main'
- found match at 'at91sam9x5-main-osc-clk'
bind node pllack@0
- attempt to match compatible string 'atmel,sama5d3-clk-pll'
- found match at 'at91-plla-clk'
bind node utmick
- attempt to match compatible string 'atmel,at91sam9x5-clk-utmi'
No match for node 'utmick' bind node masterck
- attempt to match compatible string 'atmel,at91sam9x5-clk-master'
- found match at 'at91-master-clk'
bind node h32mxck
- attempt to match compatible string 'atmel,sama5d4-clk-h32mx'
No match for node 'h32mxck' bind node periph32ck
- attempt to match compatible string 'atmel,at91sam9x5-clk-
peripheral'
- found match at 'sam9x5-periph-clk'
Cannot create device named 'uart1_clk@25' (err=-12) Error binding driver 'sam9x5-periph-clk': -12 bind node periph64ck
- attempt to match compatible string 'atmel,at91sam9x5-clk-
peripheral'
- found match at 'sam9x5-periph-clk'
Error binding driver 'sam9x5-periph-clk': -12 bind node gck
- attempt to match compatible string 'atmel,sama5d2-clk-generated'
No match for node 'gck' Some drivers failed to bind Error binding driver 'at91-pmc': -12 bind node spi@f8000000
- attempt to match compatible string 'atmel,at91rm9200-spi'
No match for node 'spi@f8000000' bind node serial@f8038200
- attempt to match compatible string 'atmel,at91sam9260-usart'
- found match at 'serial_atmel'
Error binding driver 'serial_atmel': -12 bind node gpio@fc038000
- attempt to match compatible string 'atmel,sama5d2-gpio'
- found match at 'gpio_atmel_pio4'
Error binding driver 'gpio_atmel_pio4': -12 Some drivers failed to bind Error binding driver 'generic_simple_bus': -12 Some drivers failed to bind Error binding driver 'generic_simple_bus': -12 Some drivers failed to bind initcall sequence 26f20864 failed at call 26f073e4 (err=-12) ### ERROR ### Please RESET the board ###
NOTE: On my lists.c file I changed all the "dm_debug" for "dm_warn" because the debug uart is the only one that's responding. Any help or guidance would be really appreciated.
Seems like some drivers are disabled.
Which version of U-Boot do you use ?
What platform did you derive your configuration from ?
-- Best regards, Marek Vasut