Re: [U-Boot] [PATCH v2 4/6] net: e1000: Add Kconfig options

Hi Simon,

On Tue, Aug 11, 2015 at 8:39 AM, Simon Glass sjg@chromium.org wrote:

Add Kconfig options in preparation for moving boards to use Kconfig.

Signed-off-by: Simon Glass sjg@chromium.org

Changes in v2:

• Move the Kconfig additions to a new patch

drivers/net/Kconfig | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index ce76a02..fcc3d9b 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -20,6 +20,45 @@ menuconfig NETDEVICES

if NETDEVICES

+config E1000

•   bool "Intel PRO/1000 Gigabit Ethernet support"
  

•   help
  

•     This driver supports Intel(R) PRO/1000 gigabit ethernet family of
  

•     adapters.  For more information on how to identify your adapter, go
  

•     to the Adapter & Driver ID Guide at:
  

•     <http://support.intel.com/support/network/adapter/pro100/21397.htm>
  

+config E1000_SPI_GENERIC

•   bool "Allow access to the Intel 8257x SPI bus"
  

•   depends on E1000
  

•   help
  

•     Allow generic access to the SPI bus on the Intel 8257x, for
  

•     example with the "sspi" command.
  

+config E1000_SPI

•   bool "Enable SPI bus utility code"
  

•   depends on E1000
  

•   help
  

•     Utility code for direct access to the SPI bus on Intel 8257x.
  

•     This does not do anything useful unless you set at least one
  

•     of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
  

+config E1000_FALLBACK_MAC

•   bool "Default MAC address for empty EEPROM after production"
  

•   depends on E1000
  

•   help
  

•     Use this to define a fallback MAC address for when none is available
  

•     in the device EEPROM or U-Boot environment variables.
  

Please eliminate this option. If you want a fallback, please enable CONFIG_NET_RANDOM_ETHADDR.

+config CMD_E1000

•   bool "Enable the e1000 command"
  

•   depends on E1000
  

•   help
  

•     This enables the 'e1000' management command for E1000 devices. When
  

•     used on devices with SPI support you can reprogram the EEPROM from
  

•     U-Boot.
  

config ETH_SANDBOX depends on DM_ETH && SANDBOX default y -- 2.5.0.rc2.392.g76e840b

---

U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot