From: Arthur Li arthur.li@cortina-access.com
- Rename DT compatible name - Remove uneccessary if-statement to support 8-bit buswidth - Remove redundant error msg - Use symbolic constants in switch statement
Signed-off-by: Arthur Li arthur.li@cortina-access.com Signed-off-by: Alex Nemirovsky alex.nemirovsky@cortina-access.com CC: Peng Fan peng.fan@nxp.com ---
Changes in v6: None Changes in v5: - Rebase code basis on v2020.04-rc5 which has already incorporated CAxxxx eMMC initial baseline
Changes in v4: - Rename DT compatible name - Remove uneccessary if-statement to support 8-bit buswidth - Remove redundant error msg - Use symbolic constants in switch statement
Changes in v3: None Changes in v2: - Add I2C controller - Add LED controller - Add SPI NAND and NOR controller
drivers/mmc/ca_dw_mmc.c | 34 ++++++++++++---------------------- 1 file changed, 12 insertions(+), 22 deletions(-)
diff --git a/drivers/mmc/ca_dw_mmc.c b/drivers/mmc/ca_dw_mmc.c index acbc850..198c41f 100644 --- a/drivers/mmc/ca_dw_mmc.c +++ b/drivers/mmc/ca_dw_mmc.c @@ -19,6 +19,7 @@
#define SD_CLK_SEL_200MHZ (0x2) #define SD_CLK_SEL_100MHZ (0x1) +#define SD_CLK_SEL_50MHZ (0x0)
#define IO_DRV_SD_DS_OFFSET (16) #define IO_DRV_SD_DS_MASK (0xff << IO_DRV_SD_DS_OFFSET) @@ -44,15 +45,11 @@ static void ca_dwmci_clksel(struct dwmci_host *host) struct ca_dwmmc_priv_data *priv = host->priv; u32 val = readl(priv->sd_dll_reg);
- if (host->bus_hz >= 200000000) { - val &= ~SD_CLK_SEL_MASK; + val &= ~SD_CLK_SEL_MASK; + if (host->bus_hz >= 200000000) val |= SD_CLK_SEL_200MHZ; - } else if (host->bus_hz >= 100000000) { - val &= ~SD_CLK_SEL_MASK; + else if (host->bus_hz >= 100000000) val |= SD_CLK_SEL_100MHZ; - } else { - val &= ~SD_CLK_SEL_MASK; - }
writel(val, priv->sd_dll_reg); } @@ -77,14 +74,14 @@ unsigned int ca_dwmci_get_mmc_clock(struct dwmci_host *host, uint freq) u8 clk_div;
switch (sd_clk_sel) { - case 2: - clk_div = 1; + case SD_CLK_SEL_50MHZ: + clk_div = 4; break; - case 1: + case SD_CLK_SEL_100MHZ: clk_div = 2; break; default: - clk_div = 4; + clk_div = 1; }
return SD_SCLK_MAX / clk_div / (host->div + 1); @@ -100,9 +97,6 @@ static int ca_dwmmc_ofdata_to_platdata(struct udevice *dev) host->dev_index = 0;
host->buswidth = dev_read_u32_default(dev, "bus-width", 1); - if (host->buswidth != 1 && host->buswidth != 4) - return -EINVAL; - host->bus_hz = dev_read_u32_default(dev, "max-frequency", 50000000); priv->ds = dev_read_u32_default(dev, "io_ds", 0x33); host->fifo_mode = dev_read_bool(dev, "fifo-mode"); @@ -118,10 +112,8 @@ static int ca_dwmmc_ofdata_to_platdata(struct udevice *dev) return -EINVAL;
host->ioaddr = dev_read_addr_ptr(dev); - if (host->ioaddr == (void *)FDT_ADDR_T_NONE) { - printf("DWMMC: base address is invalid\n"); + if (!host->ioaddr) return -EINVAL; - }
host->priv = priv;
@@ -140,10 +132,8 @@ static int ca_dwmmc_probe(struct udevice *dev) memcpy(&ca_dwmci_dm_ops, &dm_dwmci_ops, sizeof(struct dm_mmc_ops));
dwmci_setup_cfg(&plat->cfg, host, host->bus_hz, MIN_FREQ); - if (host->buswidth == 1) { - (&plat->cfg)->host_caps &= ~MMC_MODE_8BIT; - (&plat->cfg)->host_caps &= ~MMC_MODE_4BIT; - } + if (host->buswidth == 1) + (&plat->cfg)->host_caps &= ~(MMC_MODE_8BIT | MMC_MODE_4BIT);
host->mmc = &plat->mmc; host->mmc->priv = &priv->host; @@ -164,7 +154,7 @@ static int ca_dwmmc_bind(struct udevice *dev) }
static const struct udevice_id ca_dwmmc_ids[] = { - { .compatible = "snps,dw-cortina" }, + { .compatible = "cortina,ca-mmc" }, { } };