These are the fixes I needed to do to get my board going.
[PATCH 1/8] i.MX25: add mxc_get_clock infrastructure
SD-controller (fsl_esdhc.c) needs a clock frequency in gd->sdhc_clk. I tried to follow the idea of other architectures.
[PATCH 2/8] i.MX: Add target flashable to offset 0
Helps flashing with openocd
[PATCH 4/8] i.MX25: Has a GPIO4 too
GPIO4 is used in our board
[PATCH 5/8] MXC FEC: Resolve speed before configuring gasket
Without this 10BaseT doesn't work
First and second OOB bytes are used for bad block indication
USB controller in the i.MX25 has PORTSC register like the controller in i.MX31
BTW, I can't understand what is the meaning of writing into &ehci->control. I can't find such a register from reference manuals of i.MX25, 28 nor 31.
[PATCH 3/8] Build: Ignore build tree and IDE control file [PATCH 6/8] i.MX25: Add Exertus EXE4026 board
Maybe these does not belong into this series but I didn't know how to exclude them from this series.