Enable PCIe/NVMe support. Also, enable the reset driver which is a prerequisite for PCIe support.
Acked-by: Francesco Dolcini francesco.dolcini@toradex.com Tested-by: Marcel Ziswiler marcel.ziswiler@toradex.com Signed-off-by: Sumit Garg sumit.garg@linaro.org --- configs/verdin-imx8mp_defconfig | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/configs/verdin-imx8mp_defconfig b/configs/verdin-imx8mp_defconfig index 7ac5e65642c..b6194404baa 100644 --- a/configs/verdin-imx8mp_defconfig +++ b/configs/verdin-imx8mp_defconfig @@ -16,6 +16,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx8mp-verdin-wifi-dev" CONFIG_SPL_TEXT_BASE=0x920000 CONFIG_TARGET_VERDIN_IMX8MP=y CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_DM_RESET=y CONFIG_SYS_MONITOR_LEN=524288 CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y @@ -26,6 +27,7 @@ CONFIG_SPL=y CONFIG_IMX_BOOTAUX=y CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000 CONFIG_SYS_LOAD_ADDR=0x48200000 +CONFIG_PCI=y CONFIG_SYS_MEMTEST_START=0x40000000 CONFIG_SYS_MEMTEST_END=0x80000000 CONFIG_REMAKE_ELF=y @@ -76,6 +78,7 @@ CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_READ=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y @@ -145,8 +148,11 @@ CONFIG_DWC_ETH_QOS_IMX=y CONFIG_FEC_MXC=y CONFIG_RGMII=y CONFIG_MII=y +CONFIG_NVME_PCI=y +CONFIG_PCIE_DW_IMX=y CONFIG_PHY=y CONFIG_PHY_IMX8MQ_USB=y +CONFIG_PHY_IMX8M_PCIE=y CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_IMX8M=y