10 Feb
2010
10 Feb
'10
4:16 p.m.
Hi Andreas,
Le 10/02/2010 15:55, Andreas Orfanos a écrit :
Did you have to make changes in cpu/arm_cortex8/start.S file?
we are using u-boot-2009.01 + freescale patches. No change to start.S (except a small hack to turn on a led to check u-boot is properly loaded and run).
I don't have to make any changes on DCD table anyway, as it has already produced by freescale for mx51_3stack board
I started with the DCD of Redboot for 3Stack as the one for the 3Stack in u-boot never worked here. If you don't manage to get it running using RedBoot DCD, come back to me on next thursday where I should be able to extract some patches as I'm actually busy on an other subject.
Eric