Dear Christopher Harvey,
In message 20110704174320.GB3016@harvey-pc.matrox.com you wrote:
Signed-off-by: Christopher Harvey charvey@matrox.com
README | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-)
Please don't make this ARM specific. CONFIG_SYS_TEXT_BASE has the same meaning for all architectures.
diff --git a/README b/README index a760cf3..a0090ef 100644 --- a/README +++ b/README @@ -2355,6 +2355,15 @@ Configuration Settings:
- CONFIG_SYS_SDRAM_BASE: Physical start address of SDRAM. _Must_ be 0 here.
+- CONFIG_SYS_TEXT_BASE:
- ARM:Is the address of the u-boot code that is loaded in memory.
To be precise: it is the address of the start address of U-Boot in memory.
Please omit the "that is loaded in memory", because for example on systems booting from ROM (or NOR flash etc.) nothing gets loaded.
This value can be in ROM space since u-boot can run fromwithin ROM. ...
Again, not strictly correct. Only some parts of U-Boot (the part before relocation) can run from ROM.
... CONFIG_SYS_TEXT_BASE is simply called _TEXT_BASEin some files, like arch/arm/lib/board.c.
I consider this a bad idea. It should not be documented, but rather fixed.
This value has nothing to do with the relocation destinationin RAM. See doc/README.arm-relocation for more info.
Again, I'm unhappy to see this being ARM specific. It ain't so, on contrary - we changed ARM to do this so as ARMis in sync with other architectures.
Best regards,
Wolfgang Denk