Re: [U-Boot] [PATCH] eth: dtsec: fix TBI ANA setting bug in dtsec_configure_serdes()

On 12/13/2015 11:07 PM, Xie Shaohui-B21989 wrote:

Hi,

As mentioned, the value 0x4001 is the desired one in AN3869 for SGMII setting, quoted as below: " Program TBI ANA = 0x4001 (SGMII) or 0x01A0 (1000BASE-X). "

I think the AN3869 should be followed, change SGMII setting just because it worked on P2041rdb is not a good reason.

To distinguish SGMII from other connections should be the way to program TBI ANA, This is also follow the AN3869.

Best Regards, Shaohui Xie

Looks like this patch is dead. I will mark is NA.

York