Re: [PATCH] ARM: dts: at91: sam9x60ek: fix indentation for pinctrl sub-nodes

On 9/20/22 11:43 AM, Michael Nazzareno Trimarchi wrote:

Hi

On Tue, Sep 20, 2022 at 10:33 AM Dario Binacchi dario.binacchi@amarulasolutions.com wrote:

...

The indentation went far on the right due to an extra tab for each pinctrl sub-nodes.

Signed-off-by: Dario Binacchi dario.binacchi@amarulasolutions.com

arch/arm/dts/sam9x60ek.dts | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/arch/arm/dts/sam9x60ek.dts b/arch/arm/dts/sam9x60ek.dts index 54c694bd7848..eb44868a3e3e 100644 --- a/arch/arm/dts/sam9x60ek.dts +++ b/arch/arm/dts/sam9x60ek.dts @@ -80,26 +80,26 @@ };

                     pinctrl {

•                                   pinctrl_qspi: qspi {
  

•                                           atmel,pins =
  

•                                                   <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE
  

•                                                    AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE
  

•                                                    AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
  

•                                                    AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
  

•                                                    AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
  

•                                                    AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
  

•                                   };
  

•                           pinctrl_qspi: qspi {
  

•                                   atmel,pins =
  

•                                           <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE
  

•                                            AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE
  

•                                            AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
  

•                                            AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
  

•                                            AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
  

•                                            AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
  

•                           };
  
  

•                                   pinctrl_flx0: flx0_default {
  

•                                           atmel,pins =
  

•                                                   <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
  

•                                                    AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
  

•                                   };
  

•                           pinctrl_flx0: flx0_default {
  

•                                   atmel,pins =
  

•                                           <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
  

•                                            AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
  

•                           };
  
  

•                                   pinctrl_onewire_tm_default: onewire_tm_default {
  

•                                           atmel,pins =
  

•                                                   <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
  

•                                   };
  

•                           pinctrl_onewire_tm_default: onewire_tm_default {
  

•                                   atmel,pins =
  

•                                           <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
  

•                           };
  
                     };
             };
  

-- 2.32.0

Reviewed-By: Michael Trimarchi michael@amarulasolutions.com

Applied to u-boot-at91 / master , thanks !