Handling TPL and SPL in the Makefile for mach-rockchip was based on nested if checks and/or if-else-if paths. This can be simplified and made more readable by using $(SPL_TPL_) and by introducing intermediate variables for the aggregation of SPL and TPL features.
Signed-off-by: Philipp Tomsich philipp.tomsich@theobroma-systems.com ---
arch/arm/mach-rockchip/Makefile | 46 +++++++++++++++++++++++++---------------- 1 file changed, 28 insertions(+), 18 deletions(-)
diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile index 8a3cb9f..633c91e 100644 --- a/arch/arm/mach-rockchip/Makefile +++ b/arch/arm/mach-rockchip/Makefile @@ -4,37 +4,47 @@ # SPDX-License-Identifier: GPL-2.0+ #
-obj-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o -obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram_common.o +# We don't want the bootrom-helper present in a full U-Boot build, as +# this may have entered from ATF with the stack-pointer pointing to +# inaccessible/protected memory (and the bootrom-helper assumes that +# the stack-pointer is valid before switching to the U-Boot stack). +obj-spl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o save_boot_param.o +obj-tpl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o save_boot_param.o + +obj-tpl-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-tpl.o + +obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o +obj-spl-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-spl.o +obj-spl-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board-spl.o +obj-spl-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-spl.o +obj-spl-$(CONFIG_ROCKCHIP_RK3368) += rk3368-board-spl.o +obj-spl-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board-spl.o
-ifdef CONFIG_TPL_BUILD -obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-tpl.o -obj-$(CONFIG_ROCKCHIP_BROM_HELPER) += save_boot_param.o -else ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o -obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-spl.o -obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board-spl.o -obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-spl.o -obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board-spl.o -obj-$(CONFIG_ROCKCHIP_BROM_HELPER) += save_boot_param.o -else +ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board.o obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board.o obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board.o obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board.o endif + +obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram_common.o + ifndef CONFIG_ARM64 obj-y += rk_timer.o endif -obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/ - -ifndef CONFIG_TPL_BUILD -obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188/ -endif
+obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/ +obj-tpl-$(CONFIG_ROCKCHIP_RK3188) += rk3188/ obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x/ obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288/ obj-$(CONFIG_ROCKCHIP_RK3328) += rk3328/ obj-$(CONFIG_ROCKCHIP_RK3368) += rk3368/ obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399/ obj-$(CONFIG_ROCKCHIP_RV1108) += rv1108/ + +# Clear out SPL objects, in case this is a TPL build +obj-spl-$(CONFIG_TPL_BUILD) = + +# Now add SPL/TPL objects back into the main build +obj-$(CONFIG_SPL_BUILD) += $(obj-spl-y) +obj-$(CONFIG_TPL_BUILD) += $(obj-tpl-y)