This patch is needed if the MAC is directly connected to a ethernet switch. In my case the FEC MAC is connected to a Micrel KSZ8895. All I need to to is configure my fixed phy/link like:
Signed-off-by: Christian Gmeiner christian.gmeiner@gmail.com --- drivers/net/phy/Makefile | 1 + drivers/net/phy/fixed.c | 34 ++++++++++++++++++++++++++++++++++ drivers/net/phy/phy.c | 3 +++ 3 files changed, 38 insertions(+) create mode 100644 drivers/net/phy/fixed.c
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index fe762e9..17e486f 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -19,6 +19,7 @@ COBJS-$(CONFIG_PHY_ATHEROS) += atheros.o COBJS-$(CONFIG_PHY_BROADCOM) += broadcom.o COBJS-$(CONFIG_PHY_DAVICOM) += davicom.o COBJS-$(CONFIG_PHY_ET1011C) += et1011c.o +COBJS-$(CONFIG_PHY_FIXED) += fixed.o COBJS-$(CONFIG_PHY_ICPLUS) += icplus.o COBJS-$(CONFIG_PHY_LXT) += lxt.o COBJS-$(CONFIG_PHY_MARVELL) += marvell.o diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c new file mode 100644 index 0000000..70ff7bb --- /dev/null +++ b/drivers/net/phy/fixed.c @@ -0,0 +1,34 @@ +/* + * Fixed PHY driver + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Copyright 2013 Bachmann electronic GmbH + * author Gmeiner Christian + */ +#include <config.h> +#include <common.h> +#include <phy.h> + +int fixed_config(struct phy_device *phydev) +{ + phydev->link = 1; + phydev->duplex = CONFIG_PHY_FIXED_SPEED; + phydev->speed = CONFIG_PHY_FIXED_DUPLEX; + + return 0; +} + +static struct phy_driver fixed_driver = { + .uid = 0xffffffff, + .mask = 0x00000000, + .name = "Fixed PHY", + .features = 0, + .config = &fixed_config, +}; + +int phy_fixed_init(void) +{ + phy_register(&fixed_driver); + return 0; +} diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 62925bb..f2bccaf 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -479,6 +479,9 @@ int phy_init(void) #ifdef CONFIG_PHY_VITESSE phy_vitesse_init(); #endif +#ifdef CONFIG_PHY_FIXED + phy_fixed_init(); +#endif
return 0; }