On 09/22/2017 12:03 AM, Jean-Jacques Hiblot wrote:
In the TI SOCs a PBIAS cell exists to provide a bias voltage to the MMC1 IO cells. Without this bias voltage these I/O cells can not function properly. This bias voltage is either 1.8v or 3.0v.
The first patch adds 2 functions to the DM core: to count strings in a stringlist and get a string from a stringlist based on its position in the list. The second patch implements the support for this PBIAS cell as a regulator driver.
Applied to u-boot-mmc for pmic.
Best Regards, Jaehoon Chung
Jean-Jacques
changes since v2:
- rebased on u-boot/master
- automatically select REGMAP and SYSCON if PBIAS is selected.
changes since v1:
- add new functions to get strings from a stringlist in DM core
- use the dev_read_*() API to access the DT
- automatically select the PBIAS driver if DM_REGULATOR, DM_MMC and MMC_OMAP_HS are set.
- removed the patch touching the DRA7 and AM57 config files.
Jean-Jacques Hiblot (2): dm: core: Add functions to get strings and the string count from a stringlist regulator: pbias: Add PBIAS regulator for proper voltage switching on MMC1
drivers/core/read.c | 11 ++ drivers/mmc/Kconfig | 1 + drivers/power/regulator/Kconfig | 13 ++ drivers/power/regulator/Makefile | 1 + drivers/power/regulator/pbias_regulator.c | 301 ++++++++++++++++++++++++++++++ include/dm/read.h | 36 ++++ 6 files changed, 363 insertions(+) create mode 100644 drivers/power/regulator/pbias_regulator.c