The original clock support for MMC/SD cards on the RK3368 suffered from a tendency to select a divider less-or-equal to the the one giving the requested clock-rate: this can lead to higher-than-expected (or rather: higher than supported) clock rates for the MMC/SD communiction.
This change rewrites the MMC/SD clock generation to:
- always generate a clock less-than-or-equal to the requested clock
- support reparenting among the CPLL, GPLL and OSC24M parents to generate the highest clock that does not exceed the requested rate
In addition to this, the Linux DTS uses HCLK_MMC/HCLK_SDMMC instead of SCLK_MMC/SCLK_SDMMC: to match this (and to ensure that clock setup always works), we adjust the driver appropriately.
This includes the changes from:
- rockchip: clk: rk3368: convert MMC_PLL_SEL_* definitions to shifted-value form
Signed-off-by: Philipp Tomsich philipp.tomsich@theobroma-systems.com
Reviewed-by: Simon Glass sjg@chromium.org
Changes in v4: None Changes in v3: None Changes in v2: None
arch/arm/include/asm/arch-rockchip/cru_rk3368.h | 8 +- drivers/clk/rockchip/clk_rk3368.c | 119 ++++++++++++++++++------ 2 files changed, 95 insertions(+), 32 deletions(-)
Applied to u-boot-rockchip, thanks!