Rockchip TPL is not going to use both sram and dram, so we will use a separate link file.
Signed-off-by: Kever Yang kever.yang@rock-chips.com ---
arch/arm/mach-rockchip/rk3328/u-boot-tpl.lds | 91 ++++++++++++++++++++++++++++ 1 file changed, 91 insertions(+) create mode 100644 arch/arm/mach-rockchip/rk3328/u-boot-tpl.lds
diff --git a/arch/arm/mach-rockchip/rk3328/u-boot-tpl.lds b/arch/arm/mach-rockchip/rk3328/u-boot-tpl.lds new file mode 100644 index 0000000..3fd50fd --- /dev/null +++ b/arch/arm/mach-rockchip/rk3328/u-boot-tpl.lds @@ -0,0 +1,91 @@ +/* + * (C) Copyright 2013 + * David Feng fenghua@phytium.com.cn + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, garyj@denx.de + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * Aneesh V aneesh@ti.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +OUTPUT_FORMAT("elf64-littleaarch64", "elf64-littleaarch64", "elf64-littleaarch64") +OUTPUT_ARCH(aarch64) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + .text : { + . = ALIGN(8); + *(.__image_copy_start) + CPUDIR/start.o (.text*) + *(.text*) + } + + .rodata : { + . = ALIGN(8); + *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) + } + + .data : { + . = ALIGN(8); + *(.data*) + } + + .u_boot_list : { + . = ALIGN(8); + KEEP(*(SORT(.u_boot_list*))); + } + + .image_copy_end : { + . = ALIGN(8); + *(.__image_copy_end) + } + + .end : { + . = ALIGN(8); + *(.__end) + } + + _image_binary_end = .; + + .bss_start (NOLOAD) : { + . = ALIGN(8); + KEEP(*(.__bss_start)); + } + + .bss (NOLOAD) : { + *(.bss*) + . = ALIGN(8); + } + + .bss_end (NOLOAD) : { + KEEP(*(.__bss_end)); + } + + /DISCARD/ : { *(.dynsym) } + /DISCARD/ : { *(.dynstr*) } + /DISCARD/ : { *(.dynamic*) } + /DISCARD/ : { *(.plt*) } + /DISCARD/ : { *(.interp*) } + /DISCARD/ : { *(.gnu*) } +} + +#if defined(CONFIG_TPL_MAX_SIZE) +ASSERT(__image_copy_end - __image_copy_start < (CONFIG_TPL_MAX_SIZE), \ + "TPL image too big"); +#endif + +#if defined(CONFIG_TPL_BSS_MAX_SIZE) +ASSERT(__bss_end - __bss_start < (CONFIG_TPL_BSS_MAX_SIZE), \ + "TPL image BSS too big"); +#endif + +#if defined(CONFIG_TPL_MAX_FOOTPRINT) +ASSERT(__bss_end - _start < (CONFIG_TPL_MAX_FOOTPRINT), \ + "TPL image plus BSS too big"); +#endif