CPSW node needs PHY, MDIO, pinmux, DMA and INTC nodes. main_conf is required for phy_gmii_sel. Mark them as 'bootph-all' so they are available in all pre-relocation phases.
Fixes the below dts warnings:
<stdout>: Warning (reg_format): /bus@f0000/syscon@100000/phy@4044:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1) <stdout>: Warning (reg_format): /bus@f0000/ethernet@8000000/ethernet-ports/port@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) <stdout>: Warning (unit_address_vs_reg): /bus@f0000/syscon@100000: node has a unit name, but no reg or ranges property <stdout>: Warning (pci_device_reg): Failed prerequisite 'reg_format' <stdout>: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' <stdout>: Warning (simple_bus_reg): Failed prerequisite 'reg_format' <stdout>: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' <stdout>: Warning (spi_bus_reg): Failed prerequisite 'reg_format' <stdout>: Warning (avoid_default_addr_size): /bus@f0000/syscon@100000/phy@4044: Relying on default #address-cells value <stdout>: Warning (avoid_default_addr_size): /bus@f0000/syscon@100000/phy@4044: Relying on default #size-cells value <stdout>: Warning (avoid_default_addr_size): /bus@f0000/ethernet@8000000/ethernet-ports/port@1: Relying on default #address-cells value <stdout>: Warning (avoid_default_addr_size): /bus@f0000/ethernet@8000000/ethernet-ports/port@1: Relying on default #size-cells value <stdout>: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size' <stdout>: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'
Signed-off-by: Roger Quadros rogerq@kernel.org --- arch/arm/dts/k3-am625-sk-u-boot.dtsi | 39 ++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)
diff --git a/arch/arm/dts/k3-am625-sk-u-boot.dtsi b/arch/arm/dts/k3-am625-sk-u-boot.dtsi index c658506256..b78d34b459 100644 --- a/arch/arm/dts/k3-am625-sk-u-boot.dtsi +++ b/arch/arm/dts/k3-am625-sk-u-boot.dtsi @@ -21,6 +21,10 @@ }; };
+&main_conf { + bootph-all; +}; + &cbass_main { bootph-all; }; @@ -118,8 +122,43 @@ }; };
+&inta_main_dmss { + bootph-all; +}; + +&main_pktdma { + bootph-all; +}; + +&cpsw3g_mdio { + bootph-all; +}; + +&cpsw3g_phy0 { + bootph-all; +}; + +&cpsw3g_phy1 { + bootph-all; +}; + +&main_rgmii1_pins_default { + bootph-all; +}; + +&main_rgmii2_pins_default { + bootph-all; +}; + +&phy_gmii_sel { + bootph-all; +}; + &cpsw3g { bootph-all; + ethernet-ports { + bootph-all; + }; };
&cpsw_port1 {