Re: [U-Boot] NAND DMA timed out with i.mx boot source code.

On Thu, Jun 28, 2012 at 11:24 PM, alex laub923@163.com wrote:

No network on my board, so nand_update_full can't be run. I use command "kobs-ng init u-boot.sb" to update(default: > /dev/mtd0) or mfgtools from freescale. I just add support NAND to mx28evk configs file copied from m28evk configs.

There is NAND support on mx28evk.h in mainline. Looks like you are using old code.

Please use the latest mainline code and try again.

Are you able to boot from SD card on your board?