From: Vaishnav Achath vaishnav.a@ti.com
Kernel commit 5b2671594b80 ("configs: j721e: Remove HBMC_AM654 config") removed the HBMC_AM654 config because hbmc was broken in u-boot. Hence, add the missing configs necessary to re-enable Hyperflash boot.
Signed-off-by: Vaishnav Achath vaishnav.a@ti.com Signed-off-by: Anurag Dutta a-dutta@ti.com --- configs/j721e_evm_a72_defconfig | 4 +++- configs/j721e_evm_r5_defconfig | 4 ++++ 2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/configs/j721e_evm_a72_defconfig b/configs/j721e_evm_a72_defconfig index bd55634924..d742ae6934 100644 --- a/configs/j721e_evm_a72_defconfig +++ b/configs/j721e_evm_a72_defconfig @@ -140,11 +140,13 @@ CONFIG_MMC_SDHCI_AM654=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_CFI=y +CONFIG_HBMC_AM654=y CONFIG_SYS_MAX_FLASH_BANKS_DETECT=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_SFDP_SUPPORT=y @@ -157,7 +159,7 @@ CONFIG_SPI_FLASH_MT35XU=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_SPI_FLASH_MTD=y CONFIG_MULTIPLEXER=y -CONFIG_MUX_MMIO=y +CONFIG_SPL_MUX_MMIO=y CONFIG_PHY_TI_DP83867=y CONFIG_PHY_FIXED=y CONFIG_TI_AM65_CPSW_NUSS=y diff --git a/configs/j721e_evm_r5_defconfig b/configs/j721e_evm_r5_defconfig index 00546aea27..a593fed50a 100644 --- a/configs/j721e_evm_r5_defconfig +++ b/configs/j721e_evm_r5_defconfig @@ -121,11 +121,13 @@ CONFIG_MMC_SDHCI_AM654=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_CFI=y +CONFIG_HBMC_AM654=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPI_FLASH_SOFT_RESET=y @@ -134,6 +136,8 @@ CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_S28HX_T=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_MT35XU=y +CONFIG_MULTIPLEXER=y +CONFIG_MUX_MMIO=y CONFIG_PINCTRL=y # CONFIG_PINCTRL_GENERIC is not set CONFIG_SPL_PINCTRL=y