Hello Minkyu,
This change allow to use sd card on Goni the same like mmc 0. SD card is mmc dev 1, so it can be used like this: "fatls mmc 1:2".
Could you review this patch, please?
Signed-off-by: Przemyslaw Marczak p.marczak@samsung.com Signed-off-by: Kyungmin Park kyungmin.park@samsung.com CC: Minkyu Kang mk7.kang@samsung.com
board/samsung/goni/goni.c | 32 +++++++++++++++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-)
diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c index c05801d..3b236b4 100644 --- a/board/samsung/goni/goni.c +++ b/board/samsung/goni/goni.c @@ -69,6 +69,7 @@ int checkboard(void) int board_mmc_init(bd_t *bis) { int i;
int ret;
/* MASSMEMORY_EN: XMSMDATA7: GPJ2[7] output high */ s5p_gpio_direction_output(&s5pc110_gpio->j2, 7, 1);
@@ -91,7 +92,36 @@ int board_mmc_init(bd_t *bis) s5p_gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X); }
- return s5p_mmc_init(0, 4);
- ret = s5p_mmc_init(0, 4);
- if (ret) {
puts("MMC: Failed to init MMC:0.\n");return ret;- }
- /*
* SD card (T_FLASH) detect and init* T_FLASH_DETECT: EINT28: GPH3[4] input mode*/- s5p_gpio_cfg_pin(&s5pc110_gpio->h3, 4, GPIO_INPUT);
- s5p_gpio_set_pull(&s5pc110_gpio->h3, 4, GPIO_PULL_UP);
- if (!s5p_gpio_get_value(&s5pc110_gpio->h3, 4)) {
for (i = 0; i < 7; i++) {if (i == 2)continue;/* GPG2[0:6] special function 2 */s5p_gpio_cfg_pin(&s5pc110_gpio->g2, i, 0x2);/* GPG2[0:6] pull disable */s5p_gpio_set_pull(&s5pc110_gpio->g2, i, GPIO_PULL_NONE);/* GPG2[0:6] drv 4x */s5p_gpio_set_drv(&s5pc110_gpio->g2, i, GPIO_DRV_4X);}if (s5p_mmc_init(2, 4))puts("MMC: Failed to init SD card (MMC:2).\n");- }
- /* SD card init is optional so print information when it fails only */
- return ret; } #endif