Add nodes for USB0 in SPL to enable USB host boot mode
Signed-off-by: Faiz Abbas faiz_abbas@ti.com --- arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 27 ++++++++++++++++++++ 1 file changed, 27 insertions(+)
diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi index a7e5eb0553..b3d609430c 100644 --- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi +++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi @@ -287,6 +287,12 @@ u-boot,dm-spl; };
+ usb0_pins_default: usb0_pins_default { + pinctrl-single,pins = < + AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */ + >; + u-boot,dm-spl; + }; };
&main_pmx1 { @@ -393,3 +399,24 @@ u-boot,dm-spl; }; }; + +&dwc3_0 { + status = "okay"; + u-boot,dm-spl; +}; + +&usb0_phy { + status = "okay"; + u-boot,dm-spl; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins_default>; + dr_mode = "peripheral"; + u-boot,dm-spl; +}; + +&scm_conf { + u-boot,dm-spl; +};