Signed-off-by: Lei Wen leiwen@marvell.com --- arch/arm/cpu/arm926ejs/armada100/cpu.c | 14 ++++++++++++++ arch/arm/include/asm/arch-armada100/mfp.h | 4 ++++ board/Marvell/aspenite/aspenite.c | 5 +++++ include/configs/aspenite.h | 12 ++++++++++++ 4 files changed, 35 insertions(+), 0 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/armada100/cpu.c b/arch/arm/cpu/arm926ejs/armada100/cpu.c index 62aa175..8039ad2 100644 --- a/arch/arm/cpu/arm926ejs/armada100/cpu.c +++ b/arch/arm/cpu/arm926ejs/armada100/cpu.c @@ -62,6 +62,14 @@ int arch_cpu_init(void) /* Enable GPIO clock */ writel(APBC_APBCLK, &apb1clkres->gpio);
+ /* Enable general I2C clock */ + writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0); + writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0); + + /* Enable power I2C clock */ + writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1); + writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1); + /* * Enable Functional and APB clock at 14.7456MHz * for configured UART console @@ -90,3 +98,9 @@ int print_cpuinfo(void) return 0; } #endif + +#ifdef CONFIG_PXA_I2C +void i2c_clk_enable (void) +{ +} +#endif diff --git a/arch/arm/include/asm/arch-armada100/mfp.h b/arch/arm/include/asm/arch-armada100/mfp.h index d21a79f..f22b5e7 100644 --- a/arch/arm/include/asm/arch-armada100/mfp.h +++ b/arch/arm/include/asm/arch-armada100/mfp.h @@ -60,6 +60,10 @@ #define MFPO8_UART3_RXD MFP_REG(0x06c) | MFP_AF2 | MFP_DRIVE_MEDIUM #define MFPO9_UART3_TXD MFP_REG(0x070) | MFP_AF2 | MFP_DRIVE_MEDIUM
+/* I2c */ +#define MFP105_CI2C_SDA MFP_REG(0x1a4) | MFP_AF1 | MFP_DRIVE_MEDIUM +#define MFP106_CI2C_SCL MFP_REG(0x1a8) | MFP_AF1 | MFP_DRIVE_MEDIUM + /* More macros can be defined here... */
#define MFP_PIN_MAX 117 diff --git a/board/Marvell/aspenite/aspenite.c b/board/Marvell/aspenite/aspenite.c index 046ffd6..34ac7aa 100644 --- a/board/Marvell/aspenite/aspenite.c +++ b/board/Marvell/aspenite/aspenite.c @@ -33,9 +33,14 @@ DECLARE_GLOBAL_DATA_PTR; int board_early_init_f(void) { u32 mfp_cfg[] = { + /* I2C */ + MFP105_CI2C_SDA, + MFP106_CI2C_SCL, + /* Enable Console on UART1 */ MFP107_UART1_RXD, MFP108_UART1_TXD, + MFP_EOC /*End of configureation*/ }; /* configure MFP's */ diff --git a/include/configs/aspenite.h b/include/configs/aspenite.h index fd35f3e..50f8ed7 100644 --- a/include/configs/aspenite.h +++ b/include/configs/aspenite.h @@ -63,6 +63,18 @@ #undef CONFIG_ARCH_MISC_INIT
/* + * I2C definition + */ +#define CONFIG_CMD_I2C 1 +#define CONFIG_PXA_I2C 1 +#define CONFIG_PXA_I2C_NUM 2 +#define CONFIG_I2C_MULTI_BUS 1 +#define CONFIG_PXA_I2C_REG {0xd4011000, 0xd4025000} +#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C_SPEED 0 +#define CONFIG_SYS_I2C_SLAVE 0xfe + +/* * Environment variables configurations */ #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */