Erratum number: ERR008514 EDDRTQCFG Registers are Integration Strap values which controls performance parameters for DDR Controller.
The bit 25 is used to disable priorities within DDR since DDR are connected backwards on Rev2.0 silicon for LS1021A.
Signed-off-by: Yuan Yao yao.yuan@freescale.com --- Changes in v2: Add the Erratum number. --- arch/arm/cpu/armv7/ls102xa/soc.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv7/ls102xa/soc.c b/arch/arm/cpu/armv7/ls102xa/soc.c index b15cd60..98d4acd 100644 --- a/arch/arm/cpu/armv7/ls102xa/soc.c +++ b/arch/arm/cpu/armv7/ls102xa/soc.c @@ -25,7 +25,7 @@ int arch_soc_init(void) { struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; - unsigned int major; + unsigned int major, reg;
#ifdef CONFIG_FSL_QSPI out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL); @@ -86,5 +86,16 @@ int arch_soc_init(void) */ out_be32(&scfg->eddrtqcfg, 0x63b20002);
+ /* + * EDDRTQCFG Registers are Integration Strap values which controls + * performance parameters for DDR Controller. + * The bit 25 is used for disable priorities within DDR. + * This is a workaround because of the DDR are connected backwards + * on Rev2.0. + */ + reg = in_be32(&scfg->eddrtqcfg); + reg |= 1 << 6; + out_be32(&scfg->eddrtqcfg, reg); + return 0; }