The syndrome functions should use the page number passed as argument instead of the page number saved upon NAND_CMD_READ0.
This does not make any difference if the NAND_NO_AUTOINCR option is set, but otherwise this fixes accesses to the wrong pages.
Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com --- Changes in v8: None Changes in v7: None Changes in v6: None Changes in v5: None Changes in v4: - New patch.
Changes in v3: None Changes in v2: None
drivers/mtd/nand/mxc_nand.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 62d6965..29ceab3 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -463,7 +463,7 @@ static int mxc_nand_read_page_raw_syndrome(struct mtd_info *mtd, int n;
_mxc_nand_enable_hwecc(mtd, 0); - chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, host->page_addr); + chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
for (n = 0, steps = chip->ecc.steps; steps > 0; n++, steps--) { host->col_addr = n * eccsize; @@ -507,7 +507,7 @@ static int mxc_nand_read_page_syndrome(struct mtd_info *mtd, uint8_t *oob = chip->oob_poi;
MTDDEBUG(MTD_DEBUG_LEVEL1, "Reading page %u to buf %p oob %p\n", - host->page_addr, buf, oob); + page, buf, oob);
/* first read the data area and the available portion of OOB */ for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) { @@ -545,7 +545,7 @@ static int mxc_nand_read_page_syndrome(struct mtd_info *mtd,
/* Then switch ECC off and read the OOB area to get the ECC code */ _mxc_nand_enable_hwecc(mtd, 0); - chip->cmdfunc(mtd, NAND_CMD_READOOB, mtd->writesize, host->page_addr); + chip->cmdfunc(mtd, NAND_CMD_READOOB, mtd->writesize, page); eccsteps = chip->ecc.steps; oob = chip->oob_poi + chip->ecc.prepad; for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) {