If the SPL is to be used for Falcon mode then we need to make sure it configures basic GPIO (iomux, padconf, and default output levels).
Signed-off-by: Tim Harvey tharvey@gateworks.com --- board/gateworks/gw_ventana/gw_ventana_spl.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c index 82078a0..cde04cf 100644 --- a/board/gateworks/gw_ventana/gw_ventana_spl.c +++ b/board/gateworks/gw_ventana/gw_ventana_spl.c @@ -510,6 +510,9 @@ void board_init_f(ulong dummy) /* read/validate EEPROM info to determine board model and SDRAM cfg */ board_model = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
+ /* configure model-specific gpio */ + setup_iomux_gpio(board_model, &ventana_info); + /* provide some some default: 32bit 128MB */ if (GW_UNKNOWN == board_model) { ventana_info.sdram_width = 2;