On 11/12/24 12:23, Patrick DELAUNAY wrote:
Hi,
On 11/6/24 20:04, Marek Vasut wrote:
Add manufacturing environment into STM32MP15xx DH electronics DHSOM configuration. This environment is part of every board build, but only takes effect on systems booted with the dh,stm32mp15xx-dhcor-testbench device tree, i.e. systems populated with factory build of U-Boot.
Signed-off-by: Marek Vasut marex@denx.de
Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com Cc: Sean Anderson seanga2@gmail.com Cc: Simon Glass sjg@chromium.org Cc: Tom Rini trini@konsulko.com Cc: u-boot@dh-electronics.com Cc: u-boot@lists.denx.de Cc: uboot-stm32@st-md-mailman.stormreply.com
configs/stm32mp15_dhsom.config | 1 + include/configs/stm32mp15_dh_dhsom.h | 17 ++++++++++++++++- 2 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/configs/stm32mp15_dhsom.config b/configs/stm32mp15_dhsom.config index 4f8e98beec6..efc149577ea 100644 --- a/configs/stm32mp15_dhsom.config +++ b/configs/stm32mp15_dhsom.config @@ -64,6 +64,7 @@ CONFIG_SYSRESET_SYSCON=y CONFIG_SYS_BOOTCOUNT_ADDR=0x5C00A14C CONFIG_SYS_MALLOC_F_LEN=0x3000 CONFIG_SYS_PBSIZE=1050 +CONFIG_PREBOOT="run dh_preboot" CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000 CONFIG_TARGET_DH_STM32MP1_PDK2=y CONFIG_USE_SERVERIP=y diff --git a/include/configs/stm32mp15_dh_dhsom.h b/include/configs/stm32mp15_dh_dhsom.h index 2797fc61d17..c004a8cec82 100644 --- a/include/configs/stm32mp15_dh_dhsom.h +++ b/include/configs/stm32mp15_dh_dhsom.h @@ -18,6 +18,8 @@ #endif #define STM32MP_BOARD_EXTRA_ENV \ + "dh_preboot=" \ + "run dh_testbench_backward_compat\0" \ "dh_update_sd_to_emmc=" /* Install U-Boot from SD to eMMC */ \ "setexpr loadaddr1 ${loadaddr} + 0x1000000 && " \ "load mmc 0:4 ${loadaddr1} boot/u-boot-spl.stm32 && " \ @@ -61,7 +63,20 @@ "stdout=serial\0" \ "stderr=serial\0" \ "update_sf=run dh_update_sd_to_sf\0" \ - "usb_pgood_delay=1000\0" + "usb_pgood_delay=1000\0" \ + /* Old testbench-only backward compatibility environment */ \ + "dh_testbench_backward_compat=" \ + "test ${board_name} = "dh,stm32mp15xx-dhcor-testbench" && " \ + "run load_bootenv importbootenv\0" \ + "importbootenv=" \ + "echo Importing environment from DHupdate.ini...;" \ + "env import -t ${loadaddr} ${filesize}\0" \ + "load_bootenv=" \ + "usb reset && " \ + "load usb ${usbdev}:${usbpart} ${loadaddr} DHupdate.ini && " \ + "echo "--> Update: found DHupdate.ini (${filesize} bytes)"\0" \ + "usbdev=0\0" \ + "usbpart=1\0" #include <configs/stm32mp15_common.h>
Reviewed-by: Patrick Delaunay patrick.delaunay@foss.st.com
Thanks Patrick
Applied to u-boot-stm/master, thanks!
Regards Patrick