The phyBOARD Pollux has two USB ports. Add support for USB host and USB storage for the USB1 port.
Signed-off-by: Benjamin Hahn B.Hahn@phytec.de --- arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi | 13 +++++++++++++ configs/phycore-imx8mp_defconfig | 10 ++++++++++ 2 files changed, 23 insertions(+)
diff --git a/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi b/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi index 1c7b250549..5d6974f8fa 100644 --- a/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi @@ -70,6 +70,19 @@ bootph-pre-ram; };
+&usb3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&usb_dwc3_1 { + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + &usdhc2 { bootph-pre-ram; }; diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig index 519e0cfb3d..74450b957b 100644 --- a/configs/phycore-imx8mp_defconfig +++ b/configs/phycore-imx8mp_defconfig @@ -65,6 +65,7 @@ CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -104,6 +105,7 @@ CONFIG_DM_ETH_PHY=y CONFIG_FEC_MXC=y CONFIG_RGMII=y CONFIG_MII=y +CONFIG_PHY_IMX8MQ_USB=y CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_IMX8M=y @@ -120,4 +122,12 @@ CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_DM_THERMAL=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_STORAGE=y CONFIG_IMX_WATCHDOG=y