26 Oct
2023
26 Oct
'23
4:21 p.m.
On Thu, Oct 19, 2023 at 4:43 PM Hugo Villeneuve hugo@hugovil.com wrote:
From: Hugo Villeneuve hvilleneuve@dimonoff.com
With DM enabled, there is no need for board code to initialize the FEC interface.
The ethernet PHYs on the symphony carrier board have a dedicated crystal/oscillator. If the SOM has the EC configuration option (onboard ethernet PHY), it also has a dedicated crystal/oscillator. So in all cases, there is no need to enable the RGMII TX clk output.
This follows a similar change introduced by Fabio Estevam: Link: https://lore.kernel.org/u-boot/20231019170441.1610453-1-festevam@gmail.com/
Signed-off-by: Hugo Villeneuve hvilleneuve@dimonoff.com
Reviewed-by: Fabio Estevam festevam@gmail.com