From: Stephen Warren swarren@nvidia.com
If a board has all 8 data lines routed, the SD/MMC controller can still operate in 4-bit (or presumably even 1-bit) mode. Adjust Tegra's MMC driver to report the 4-bit capability even for 8-bit slots.
Signed-off-by: Stephen Warren swarren@nvidia.com --- Note: This series depends on Andy Fleming's "mmc: Properly determine maximum supported bus width" --- drivers/mmc/tegra_mmc.c | 7 ++++--- 1 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c index 8fea6a6..1fd5592 100644 --- a/drivers/mmc/tegra_mmc.c +++ b/drivers/mmc/tegra_mmc.c @@ -547,10 +547,11 @@ int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio) mmc->getcd = tegra_mmc_getcd;
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; + mmc->host_caps = 0; if (bus_width == 8) - mmc->host_caps = MMC_MODE_8BIT; - else - mmc->host_caps = MMC_MODE_4BIT; + mmc->host_caps |= MMC_MODE_8BIT; + if (bus_width >= 4) + mmc->host_caps |= MMC_MODE_4BIT; mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC;
/*