This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it.
Cc: Marek Vasut marek.vasut@gmail.com Signed-off-by: Tom Rini trini@konsulko.com --- arch/arm/mach-imx/mxs/Kconfig | 1 - board/olimex/mx23_olinuxino/Kconfig | 15 --- board/olimex/mx23_olinuxino/MAINTAINERS | 6 - board/olimex/mx23_olinuxino/Makefile | 10 -- board/olimex/mx23_olinuxino/mx23_olinuxino.c | 81 ------------- board/olimex/mx23_olinuxino/spl_boot.c | 120 ------------------- configs/mx23_olinuxino_defconfig | 47 -------- include/configs/mx23_olinuxino.h | 118 ------------------ 8 files changed, 398 deletions(-) delete mode 100644 board/olimex/mx23_olinuxino/Kconfig delete mode 100644 board/olimex/mx23_olinuxino/MAINTAINERS delete mode 100644 board/olimex/mx23_olinuxino/Makefile delete mode 100644 board/olimex/mx23_olinuxino/mx23_olinuxino.c delete mode 100644 board/olimex/mx23_olinuxino/spl_boot.c delete mode 100644 configs/mx23_olinuxino_defconfig delete mode 100644 include/configs/mx23_olinuxino.h
diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig index c731d01d4ed3..636c08b26353 100644 --- a/arch/arm/mach-imx/mxs/Kconfig +++ b/arch/arm/mach-imx/mxs/Kconfig @@ -20,7 +20,6 @@ endchoice config SYS_SOC default "mxs"
-source "board/olimex/mx23_olinuxino/Kconfig" source "board/sandisk/sansa_fuze_plus/Kconfig"
endif diff --git a/board/olimex/mx23_olinuxino/Kconfig b/board/olimex/mx23_olinuxino/Kconfig deleted file mode 100644 index 0b151c9bb815..000000000000 --- a/board/olimex/mx23_olinuxino/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_MX23_OLINUXINO - -config SYS_BOARD - default "mx23_olinuxino" - -config SYS_VENDOR - default "olimex" - -config SYS_SOC - default "mxs" - -config SYS_CONFIG_NAME - default "mx23_olinuxino" - -endif diff --git a/board/olimex/mx23_olinuxino/MAINTAINERS b/board/olimex/mx23_olinuxino/MAINTAINERS deleted file mode 100644 index 25f4a10e9ae0..000000000000 --- a/board/olimex/mx23_olinuxino/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -MX23_OLINUXINO BOARD -M: Marek Vasut marek.vasut@gmail.com -S: Maintained -F: board/olimex/mx23_olinuxino/ -F: include/configs/mx23_olinuxino.h -F: configs/mx23_olinuxino_defconfig diff --git a/board/olimex/mx23_olinuxino/Makefile b/board/olimex/mx23_olinuxino/Makefile deleted file mode 100644 index b2ea89743440..000000000000 --- a/board/olimex/mx23_olinuxino/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. - -ifndef CONFIG_SPL_BUILD -obj-y := mx23_olinuxino.o -else -obj-y := spl_boot.o -endif diff --git a/board/olimex/mx23_olinuxino/mx23_olinuxino.c b/board/olimex/mx23_olinuxino/mx23_olinuxino.c deleted file mode 100644 index f13fdb8d47e7..000000000000 --- a/board/olimex/mx23_olinuxino/mx23_olinuxino.c +++ /dev/null @@ -1,81 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Olimex MX23 Olinuxino board - * - * Copyright (C) 2013 Marek Vasut marex@denx.de - */ - -#include <common.h> -#include <init.h> -#include <asm/gpio.h> -#include <asm/io.h> -#include <asm/arch/iomux-mx23.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/clock.h> -#include <asm/arch/sys_proto.h> -#ifdef CONFIG_LED_STATUS -#include <status_led.h> -#endif -#include <linux/delay.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Functions - */ -int board_early_init_f(void) -{ - /* IO0 clock at 480MHz */ - mxs_set_ioclk(MXC_IOCLK0, 480000); - - /* SSP0 clock at 96MHz */ - mxs_set_sspclk(MXC_SSPCLK0, 96000, 0); - - return 0; -} - -#ifdef CONFIG_CMD_USB -int board_ehci_hcd_init(int port) -{ - /* Enable LAN9512 (Maxi) or GL850G (Mini) USB HUB power. */ - gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 1); - udelay(100); - return 0; -} - -int board_ehci_hcd_exit(int port) -{ - /* Enable LAN9512 (Maxi) or GL850G (Mini) USB HUB power. */ - gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 0); - return 0; -} -#endif - -int dram_init(void) -{ - return mxs_dram_init(); -} - -#ifdef CONFIG_CMD_MMC -static int mx23_olx_mmc_cd(int id) -{ - return 1; /* Card always present */ -} - -int board_mmc_init(struct bd_info *bis) -{ - return mxsmmc_initialize(bis, 0, NULL, mx23_olx_mmc_cd); -} -#endif - -int board_init(void) -{ - /* Adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - -#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE) - status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_STATE); -#endif - - return 0; -} diff --git a/board/olimex/mx23_olinuxino/spl_boot.c b/board/olimex/mx23_olinuxino/spl_boot.c deleted file mode 100644 index 248176c23cdc..000000000000 --- a/board/olimex/mx23_olinuxino/spl_boot.c +++ /dev/null @@ -1,120 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Olimex MX23 Olinuxino Boot setup - * - * Copyright (C) 2013 Marek Vasut marex@denx.de - */ - -#include <common.h> -#include <config.h> -#include <asm/io.h> -#include <asm/arch/iomux-mx23.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/sys_proto.h> - -#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP) -#define MUX_CONFIG_SSP (MXS_PAD_8MA | MXS_PAD_PULLUP) - -const iomux_cfg_t iomux_setup[] = { - /* DUART */ - MX23_PAD_PWM0__DUART_RX, - MX23_PAD_PWM1__DUART_TX, - - /* EMI */ - MX23_PAD_EMI_D00__EMI_D00 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D01__EMI_D01 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D02__EMI_D02 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D03__EMI_D03 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D04__EMI_D04 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D05__EMI_D05 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D06__EMI_D06 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D07__EMI_D07 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D08__EMI_D08 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D09__EMI_D09 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D10__EMI_D10 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D11__EMI_D11 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D12__EMI_D12 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D13__EMI_D13 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D14__EMI_D14 | MUX_CONFIG_EMI, - MX23_PAD_EMI_D15__EMI_D15 | MUX_CONFIG_EMI, - MX23_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI, - MX23_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI, - MX23_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI, - MX23_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI, - MX23_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI, - MX23_PAD_EMI_CLKN__EMI_CLKN | MUX_CONFIG_EMI, - - MX23_PAD_EMI_A00__EMI_A00 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A01__EMI_A01 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A02__EMI_A02 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A03__EMI_A03 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A04__EMI_A04 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A05__EMI_A05 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A06__EMI_A06 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A07__EMI_A07 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A08__EMI_A08 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A09__EMI_A09 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A10__EMI_A10 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A11__EMI_A11 | MUX_CONFIG_EMI, - MX23_PAD_EMI_A12__EMI_A12 | MUX_CONFIG_EMI, - MX23_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI, - MX23_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI, - - MX23_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI, - MX23_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI, - MX23_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI, - MX23_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI, - MX23_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI, - MX23_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI, - - /* Green LED */ - MX23_PAD_SSP1_DETECT__GPIO_2_1 | - (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL), - - /* MMC 0 */ - MX23_PAD_SSP1_CMD__SSP1_CMD | MUX_CONFIG_SSP, - MX23_PAD_SSP1_DATA0__SSP1_DATA0 | MUX_CONFIG_SSP, - MX23_PAD_SSP1_DATA1__SSP1_DATA1 | MUX_CONFIG_SSP, - MX23_PAD_SSP1_DATA2__SSP1_DATA2 | MUX_CONFIG_SSP, - MX23_PAD_SSP1_DATA3__SSP1_DATA3 | MUX_CONFIG_SSP, - MX23_PAD_SSP1_SCK__SSP1_SCK | MUX_CONFIG_SSP, - - /* Ethernet */ - MX23_PAD_GPMI_ALE__GPIO_0_17 | - (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL), -}; - -void board_init_ll(const uint32_t arg, const uint32_t *resptr) -{ - mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup)); -} - -/* Fine-tune the DRAM configuration. */ -void mxs_adjust_memory_params(uint32_t *dram_vals) -{ - /* Enable Auto Precharge. */ - dram_vals[3] |= 1 << 8; - /* Enable Fast Writes. */ - dram_vals[5] |= 1 << 8; - /* tEMRS = 3*tCK */ - dram_vals[10] &= ~(0x3 << 8); - dram_vals[10] |= (0x3 << 8); - /* CASLAT = 3*tCK */ - dram_vals[11] &= ~(0x3 << 0); - dram_vals[11] |= (0x3 << 0); - /* tCKE = 1*tCK */ - dram_vals[12] &= ~(0x7 << 0); - dram_vals[12] |= (0x1 << 0); - /* CASLAT_LIN_GATE = 3*tCK , CASLAT_LIN = 3*tCK, tWTR=2*tCK */ - dram_vals[13] &= ~((0xf << 16) | (0xf << 24) | (0xf << 0)); - dram_vals[13] |= (0x6 << 16) | (0x6 << 24) | (0x2 << 0); - /* tDAL = 6*tCK */ - dram_vals[15] &= ~(0xf << 16); - dram_vals[15] |= (0x6 << 16); - /* tREF = 1040*tCK */ - dram_vals[26] &= ~0xffff; - dram_vals[26] |= 0x0410; - /* tRAS_MAX = 9334*tCK */ - dram_vals[32] &= ~0xffff; - dram_vals[32] |= 0x2475; -} diff --git a/configs/mx23_olinuxino_defconfig b/configs/mx23_olinuxino_defconfig deleted file mode 100644 index 0da54c9e7606..000000000000 --- a/configs/mx23_olinuxino_defconfig +++ /dev/null @@ -1,47 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX23=y -CONFIG_SYS_TEXT_BASE=0x40002000 -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=1 -CONFIG_ENV_SIZE=0x4000 -CONFIG_ENV_OFFSET=0x40000 -CONFIG_SPL_TEXT_BASE=0x00001000 -CONFIG_TARGET_MX23_OLINUXINO=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_BOOTDELAY=3 -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_ARCH_MISC_INIT=y -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_HUSH_PARSER=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_VERSION_VARIABLE=y -CONFIG_MXS_GPIO=y -CONFIG_LED_STATUS=y -CONFIG_LED_STATUS_GPIO=y -CONFIG_LED_STATUS0=y -CONFIG_LED_STATUS_BIT=778 -CONFIG_LED_STATUS_STATE=2 -CONFIG_LED_STATUS_BOOT_ENABLE=y -CONFIG_LED_STATUS_BOOT=0 -CONFIG_LED_STATUS_CMD=y -CONFIG_MMC_MXS=y -CONFIG_CONS_INDEX=0 -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_SMSC95XX=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h deleted file mode 100644 index 2ee41aeff1b7..000000000000 --- a/include/configs/mx23_olinuxino.h +++ /dev/null @@ -1,118 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2013 Marek Vasut marex@denx.de - */ -#ifndef __CONFIGS_MX23_OLINUXINO_H__ -#define __CONFIGS_MX23_OLINUXINO_H__ - -/* System configurations */ -#define CONFIG_MACH_TYPE 4105 - -/* U-Boot Commands */ - -/* Memory configuration */ -#define PHYS_SDRAM_1 0x40000000 /* Base address */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* Max 128 MB RAM */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 - -/* Status LED */ - -/* USB */ -#ifdef CONFIG_CMD_USB -#define CONFIG_EHCI_MXS_PORT0 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -#endif - -/* Ethernet */ - -/* Booting Linux */ -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_LOADADDR 0x42000000 -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -/* Extra Environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "update_sd_firmware_filename=u-boot.sd\0" \ - "update_sd_firmware=" /* Update the SD firmware partition */ \ - "if mmc rescan ; then " \ - "if tftp ${update_sd_firmware_filename} ; then " \ - "setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \ - "setexpr fw_sz ${fw_sz} + 1 ; " \ - "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \ - "fi ; " \ - "fi\0" \ - "script=boot.scr\0" \ - "uimage=uImage\0" \ - "console=ttyAMA0\0" \ - "fdt_file=imx23-olinuxino.dtb\0" \ - "fdt_addr=0x41000000\0" \ - "boot_fdt=try\0" \ - "ip_dyn=yes\0" \ - "mmcdev=0\0" \ - "mmcpart=2\0" \ - "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "root=${mmcroot}\0" \ - "loadbootscript=" \ - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ - "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if run loadfdt; then " \ - "bootm ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootm; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootm; " \ - "fi;\0" \ - "netargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ - "usb start; " \ - "run netargs; " \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "${get_cmd} ${uimage}; " \ - "if test ${boot_fdt} = yes; then " \ - "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ - "bootm ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootm; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi;" \ - "fi; " \ - "else " \ - "bootm; " \ - "fi;\0" - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - -/* The rest of the configuration is shared */ -#include <configs/mxs.h> - -#endif /* __CONFIGS_MX23_OLINUXINO_H__ */