On 11/3/20 9:33 PM, Eugen Hristev wrote:
If the clock driver does not offer a clk_enable ops, then the system will return -ENOSYS. The clk_enable works with CCF (common clock framework). Some clocks in some cases (like the generic clock for some products: sama5d2) do not have the clk_enable primitive, and in this case probing of the driver will fail. This patch changes the behavior to return an error in case there is really an error, and not a missing primitive. If the clock driver does not have an enable primitive, most likely clocks are always enabled or enabled in the set_rate primitives.
Fixes: 81f16438d4 ("mmc: atmel-sdhci: enable the required generic clock") Signed-off-by: Eugen Hristev eugen.hristev@microchip.com
Reviewed-by: Jaehoon Chung jh80.chung@samsung.com
Best Regards, Jaehoon Chung
drivers/mmc/atmel_sdhci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/atmel_sdhci.c b/drivers/mmc/atmel_sdhci.c index f56ae63bc2..82dfc345c0 100644 --- a/drivers/mmc/atmel_sdhci.c +++ b/drivers/mmc/atmel_sdhci.c @@ -86,7 +86,8 @@ static int atmel_sdhci_probe(struct udevice *dev) return -EINVAL;
ret = clk_enable(&clk);
- if (ret)
/* return error only if the clock really has a clock enable func */
if (ret != -ENOSYS) return ret;
ret = mmc_of_parse(dev, &plat->cfg);