SF_DUAL_FLASH claims to enable support for SF_DUAL_STACKED_FLASH and SF_DUAL_PARALLEL_FLASH. But, in current U-Boot code, grepping for above enums yield no user and therefore support seems to be incomplete. Remove these configs so as to avoid confusion.
Signed-off-by: Vignesh R vigneshr@ti.com --- configs/topic_miamilite_defconfig | 1 - configs/topic_miamiplus_defconfig | 1 - configs/xilinx_zynqmp_mini_qspi_defconfig | 1 - configs/xilinx_zynqmp_zc1232_revA_defconfig | 1 - configs/xilinx_zynqmp_zc1254_revA_defconfig | 1 - configs/xilinx_zynqmp_zc1275_revA_defconfig | 1 - configs/xilinx_zynqmp_zc1275_revB_defconfig | 1 - configs/xilinx_zynqmp_zcu104_revA_defconfig | 1 - configs/xilinx_zynqmp_zcu104_revC_defconfig | 1 - configs/xilinx_zynqmp_zcu106_revA_defconfig | 1 - doc/SPI/README.dual-flash | 92 --------------------- include/configs/socfpga_stratix10_socdk.h | 1 - 12 files changed, 103 deletions(-) delete mode 100644 doc/SPI/README.dual-flash
diff --git a/configs/topic_miamilite_defconfig b/configs/topic_miamilite_defconfig index 4486975f9503..a2ff87a55029 100644 --- a/configs/topic_miamilite_defconfig +++ b/configs/topic_miamilite_defconfig @@ -41,7 +41,6 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y -CONFIG_SF_DUAL_FLASH=y CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_DEBUG_UART_ZYNQ=y diff --git a/configs/topic_miamiplus_defconfig b/configs/topic_miamiplus_defconfig index ee83f0545bd5..74deff0a19c8 100644 --- a/configs/topic_miamiplus_defconfig +++ b/configs/topic_miamiplus_defconfig @@ -40,7 +40,6 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y -CONFIG_SF_DUAL_FLASH=y CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set # CONFIG_NETDEVICES is not set diff --git a/configs/xilinx_zynqmp_mini_qspi_defconfig b/configs/xilinx_zynqmp_mini_qspi_defconfig index de7bf079551f..1138faffcc39 100644 --- a/configs/xilinx_zynqmp_mini_qspi_defconfig +++ b/configs/xilinx_zynqmp_mini_qspi_defconfig @@ -56,7 +56,6 @@ CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y -CONFIG_SF_DUAL_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y diff --git a/configs/xilinx_zynqmp_zc1232_revA_defconfig b/configs/xilinx_zynqmp_zc1232_revA_defconfig index 7521fc4e34e4..4700956dd2db 100644 --- a/configs/xilinx_zynqmp_zc1232_revA_defconfig +++ b/configs/xilinx_zynqmp_zc1232_revA_defconfig @@ -38,7 +38,6 @@ CONFIG_MISC=y CONFIG_DM_MMC=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y -CONFIG_SF_DUAL_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y diff --git a/configs/xilinx_zynqmp_zc1254_revA_defconfig b/configs/xilinx_zynqmp_zc1254_revA_defconfig index e0822b931edb..0570414a0532 100644 --- a/configs/xilinx_zynqmp_zc1254_revA_defconfig +++ b/configs/xilinx_zynqmp_zc1254_revA_defconfig @@ -38,7 +38,6 @@ CONFIG_MISC=y CONFIG_DM_MMC=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y -CONFIG_SF_DUAL_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y diff --git a/configs/xilinx_zynqmp_zc1275_revA_defconfig b/configs/xilinx_zynqmp_zc1275_revA_defconfig index 3afed6973709..7c83f7036814 100644 --- a/configs/xilinx_zynqmp_zc1275_revA_defconfig +++ b/configs/xilinx_zynqmp_zc1275_revA_defconfig @@ -38,7 +38,6 @@ CONFIG_MISC=y CONFIG_DM_MMC=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y -CONFIG_SF_DUAL_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y diff --git a/configs/xilinx_zynqmp_zc1275_revB_defconfig b/configs/xilinx_zynqmp_zc1275_revB_defconfig index 7e31b1112f8f..e2aade7606bf 100644 --- a/configs/xilinx_zynqmp_zc1275_revB_defconfig +++ b/configs/xilinx_zynqmp_zc1275_revB_defconfig @@ -41,7 +41,6 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y -CONFIG_SF_DUAL_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y diff --git a/configs/xilinx_zynqmp_zcu104_revA_defconfig b/configs/xilinx_zynqmp_zcu104_revA_defconfig index ff57ca8674e6..b612ce213224 100644 --- a/configs/xilinx_zynqmp_zcu104_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu104_revA_defconfig @@ -58,7 +58,6 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y -CONFIG_SF_DUAL_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y diff --git a/configs/xilinx_zynqmp_zcu104_revC_defconfig b/configs/xilinx_zynqmp_zcu104_revC_defconfig index 0357b1744545..2fb66b2177ab 100644 --- a/configs/xilinx_zynqmp_zcu104_revC_defconfig +++ b/configs/xilinx_zynqmp_zcu104_revC_defconfig @@ -59,7 +59,6 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y -CONFIG_SF_DUAL_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y diff --git a/configs/xilinx_zynqmp_zcu106_revA_defconfig b/configs/xilinx_zynqmp_zcu106_revA_defconfig index 210c9a347fb2..20e210ec3822 100644 --- a/configs/xilinx_zynqmp_zcu106_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu106_revA_defconfig @@ -67,7 +67,6 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y -CONFIG_SF_DUAL_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y diff --git a/doc/SPI/README.dual-flash b/doc/SPI/README.dual-flash deleted file mode 100644 index 6c88d65dd49f..000000000000 --- a/doc/SPI/README.dual-flash +++ /dev/null @@ -1,92 +0,0 @@ -SPI/QSPI Dual flash connection modes: -===================================== - -This describes how SPI/QSPI flash memories are connected to a given -controller in a single chip select line. - -Current spi_flash framework supports, single flash memory connected -to a given controller with single chip select line, but there are some -hw logics(ex: xilinx zynq qspi) that describes two/dual memories are -connected with a single chip select line from a controller. - -"dual_flash" from include/spi.h describes these types of connection mode - -Possible connections: --------------------- -SF_SINGLE_FLASH: - - single spi flash memory connected with single chip select line. - - +------------+ CS +---------------+ - | |----------------------->| | - | Controller | I0[3:0] | Flash memory | - | SPI/QSPI |<======================>| (SPI/QSPI) | - | | CLK | | - | |----------------------->| | - +------------+ +---------------+ - -SF_DUAL_STACKED_FLASH: - - dual spi/qspi flash memories are connected with a single chipselect - line and these two memories are operating stacked fasion with shared buses. - - xilinx zynq qspi controller has implemented this feature [1] - - +------------+ CS +---------------+ - | |---------------------->| | - | | I0[3:0] | Upper Flash | - | | +=========>| memory | - | | | CLK | (SPI/QSPI) | - | | | +---->| | - | Controller | CS | | +---------------+ - | SPI/QSPI |------------|----|---->| | - | | I0[3:0] | | | Lower Flash | - | |<===========+====|====>| memory | - | | CLK | | (SPI/QSPI) | - | |-----------------+---->| | - +------------+ +---------------+ - - - two memory flash devices should has same hw part attributes (like size, - vendor..etc) - - Configurations: - on LQSPI_CFG register, Enable TWO_MEM[BIT:30] on LQSPI_CFG - Enable U_PAGE[BIT:28] if U_PAGE flag set - upper memory - Disable U_PAGE[BIT:28] if U_PAGE flag unset - lower memory - - Operation: - accessing memories serially like one after another. - by default, if U_PAGE is unset lower memory should accessible, - once user wants to access upper memory need to set U_PAGE. - -SPI_FLASH_CONN_DUALPARALLEL: - - dual spi/qspi flash memories are connected with a single chipselect - line and these two memories are operating parallel with separate buses. - - xilinx zynq qspi controller has implemented this feature [1] - - +-------------+ CS +---------------+ - | |---------------------->| | - | | I0[3:0] | Upper Flash | - | |<=====================>| memory | - | | CLK | (SPI/QSPI) | - | |---------------------->| | - | Controller | CS +---------------+ - | SPI/QSPI |---------------------->| | - | | I0[3:0] | Lower Flash | - | |<=====================>| memory | - | | CLK | (SPI/QSPI) | - | |---------------------->| | - +-------------+ +---------------+ - - - two memory flash devices should has same hw part attributes (like size, - vendor..etc) - - Configurations: - Need to enable SEP_BUS[BIT:29],TWO_MEM[BIT:30] on LQSPI_CFG register. - - Operation: - Even bits, i.e. bit 0, 2, 4 ., of a data word is located in the lower memory - and odd bits, i.e. bit 1, 3, 5, ., of a data word is located in the upper memory. - -Note: Technically there is only one CS line from the controller, but -zynq qspi controller has an internal hw logic to enable additional CS -when controller is configured for dual memories. - -[1] http://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.... - --- -Jagannadha Sutradharudu Teki jaganna@xilinx.com -05-01-2014. diff --git a/include/configs/socfpga_stratix10_socdk.h b/include/configs/socfpga_stratix10_socdk.h index e190b3d9889d..0b705e6adb80 100644 --- a/include/configs/socfpga_stratix10_socdk.h +++ b/include/configs/socfpga_stratix10_socdk.h @@ -57,7 +57,6 @@ */ #ifdef CONFIG_CADENCE_QSPI /* Enable it if you want to use dual-stacked mode */ -#undef CONFIG_SF_DUAL_FLASH /*#define CONFIG_QSPI_RBF_ADDR 0x720000*/
/* Flash device info */