- Move the CONS_INDEX selection out of CONFIG_SYS_EXTRA_OPTIONS and into Kconfig proper. - Edit the relevant am57x configs to remove the now unneeded CONFIG_SYS_EXTRA_OPTIONS.
Signed-off-by: Daniel Allred d-allred@ti.com --- board/ti/am57xx/Kconfig | 9 +++++++++ configs/am57xx_evm_defconfig | 1 - configs/am57xx_evm_nodt_defconfig | 1 - 3 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/board/ti/am57xx/Kconfig b/board/ti/am57xx/Kconfig index 17745ff..87654f9 100644 --- a/board/ti/am57xx/Kconfig +++ b/board/ti/am57xx/Kconfig @@ -9,6 +9,15 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "am57xx_evm"
+config CONS_INDEX + int "UART used for console" + range 1 6 + default 3 + help + The AM57x (and DRA7xx) SoC has a total of 6 UARTs available to it. + Depending on your specific board you may want something other than UART3 + here. + source "board/ti/common/Kconfig"
endif diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig index 1090287..e40c24a 100644 --- a/configs/am57xx_evm_defconfig +++ b/configs/am57xx_evm_defconfig @@ -7,7 +7,6 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DEFAULT_DEVICE_TREE="am57xx-beagle-x15" CONFIG_SPL=y CONFIG_SPL_STACK_R=y -CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/am57xx_evm_nodt_defconfig b/configs/am57xx_evm_nodt_defconfig index 7641db5..cb91719 100644 --- a/configs/am57xx_evm_nodt_defconfig +++ b/configs/am57xx_evm_nodt_defconfig @@ -2,7 +2,6 @@ CONFIG_ARM=y CONFIG_OMAP54XX=y CONFIG_TARGET_BEAGLE_X15=y CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y