Hi kang,
On 11 February 2010 14:12, Minkyu Kang promsoft@gmail.com wrote:
Dear Naveen Krishna Ch,
On 10 February 2010 21:42, Naveen Krishna Ch ch.naveen@samsung.com wrote:
From: Naveen Krishna CH chnaveen@chnaveen.localdomain
Memory subsystem of S5PC100 handles SROM, SRAM, OneDRAM, OneNand, NAND Flash, DDRs. mem.h is a common place for the register description of Memory subsystem of S5PC100. Note: Only SROM related registers are descibed now.
Signed-off-by: Naveen Krishna Ch ch.naveen@samsung.com
Changes since V1:
- The header file is renamed to smc.h from mem.h
- The Macros are renamed according to TRM.
Comments from Minkyu kang are fixed.
Note: Some of the defined macros are not used now. They are added to
facilitiate
simple cofiguration of SMC registers.
include/asm-arm/arch-s5pc1xx/smc.h | 54
++++++++++++++++++++++++++++++++++++
1 files changed, 54 insertions(+), 0 deletions(-) create mode 100644 include/asm-arm/arch-s5pc1xx/smc.h
diff --git a/include/asm-arm/arch-s5pc1xx/smc.h
b/include/asm-arm/arch-s5pc1xx/smc.h
new file mode 100644 index 0000000..2a1ee07 --- /dev/null +++ b/include/asm-arm/arch-s5pc1xx/smc.h @@ -0,0 +1,54 @@ +/*
- (C) Copyright 2010 Samsung Electronics
- Naveen Krishna Ch ch.naveen@samsung.com
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- Note: This file contains the register description for Memory
subsystem
(SROM, NAND Flash, OneNand, DDR, OneDRAM) on S5PC1XX.
Only SROMC is defined as of now- */
+#ifndef __ASM_ARCH_SMC_H_ +#define __ASM_ARCH_SMC_H_
+#define SMC_DATA16_WIDTH(x) (1<<((x*4)+0)) +#define SMC_BYTE_ADDR_MODE(x) (1<<((x*4)+1)) /* 0-> Half-word base
address*/
/* 1-> Byte baseaddress*/
+#define SMC_WAIT_ENABLE(x) (1<<((x*4)+2)) +#define SMC_BYTE_ENABLE(x) (1<<((x*4)+3))
+#define SMC_BC_TACS 0x0 /* 0clk address set-up */ +#define SMC_BC_TCOS 0x4 /* 4clk chip selection set-up */ +#define SMC_BC_TACC 0xe /* 14clk access cycle */ +#define SMC_BC_TCOH 0x1 /* 1clk chip selection hold */ +#define SMC_BC_TAH 0x4 /* 4clk address holding time */ +#define SMC_BC_TACP 0x6 /* 6clk page mode access cycle */ +#define SMC_BC_PMC 0x0 /* normal(1data)page mode configuration */
+#define SMC_BC_CON ((SMC_BC_TACS<<28)|(SMC_BC_TCOS<<24)| \
(SMC_BC_TACC<<16)|(SMC_BC_TCOH<<12)| \(SMC_BC_TAH<<8)|(SMC_BC_TACP<<4)|(SMC_BC_PMC))+#ifndef __ASSEMBLY__ +struct s5pc1xx_smc {
unsigned int bw;unsigned int bc[6];+}; +#endif /* __ASSEMBLY__ */
+#endif /* __ASM_ARCH_SMC_H_ */
1.6.6
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Did you see my comments? http://lists.denx.de/pipermail/u-boot/2010-February/067647.html
I fixed most of your comments and for some i gave explanations, Can you please follow the previous mail once again.
Thanks Minkyu Kang -- from. prom. www.promsoft.net _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot